americanmusc1e Posted March 20, 2011 Report Posted March 20, 2011 Like the title says.... I pulled my cylinders and I'm going to bring them to the shop and see if they need boreing or just a re-ring.... but I'm thinking of getting them ported...... I mostly ride trails and drag race on the weekend..... so I'm not interested in a drag only High RPM sort of thing.... just a little better than stock Who does a good job???? How much does it normally run?? as of now my only mods are K&N, FMF Fattys, Powercore II silencers, and Trinity Racing Stage IV head.... all already on when I bought the bike..... Quote
CFH87 Posted March 20, 2011 Report Posted March 20, 2011 There are 2 choices in my book and that would either be Jeff from farm and sand toys.... Or Kevin from herr jugs racing. Biggest thing is what your budget will allow you to do. And what kind of power your looking for, my self personally I'm going with a dune port from Kevin because he has a REALLY fast turn around. And i'm going to be running damn near the same set up as you. Gunna be running a cool head 19cc domes for race gas and upgrading the clutch springs. Quote
JustDragIt Posted March 20, 2011 Report Posted March 20, 2011 Jeff @ F.A.S.T. Racing has my vote. Kevin is also good from what I have heard. Jeff did my stock cylinders..I had him do my porting and I couldn't be happier. He is extremely helpful and always goes that extra mile. I sent him my jugs once to have them bored and he even did a couple of "new tricks" to my porting at no charge! My gasser runs like a stroker on alcohol. I would go back to him a million times over. Quote
Surfrjag Posted March 20, 2011 Report Posted March 20, 2011 i cant wait to send my jugs off and have them ported. these 2 mentined have great reviews. the only decisoin is witch one?? haha you will love either one you choose im sure. Quote
jbooker82 Posted March 20, 2011 Report Posted March 20, 2011 You just as well have asked who is more popular. That is the answers your going to get. Everybody is going to tell you theirs is the best. Quote
bigblockbanshee Posted March 20, 2011 Report Posted March 20, 2011 Herr Jugs gets my vote. I've seen his work and seemingly unreal turnaround time and he will be getting my stuff when it comes time. Quote
Pasi S. Posted March 20, 2011 Report Posted March 20, 2011 Take the site sponsor who is closest to you. In my opinion they all know what they are doing. I´m not sure but M&M ATV is not so far away from you and Andy is a super nice guy to deal with. -Pasi S. Quote
Jereme6655 Posted March 20, 2011 Report Posted March 20, 2011 as said they are both good.....however i sent mine to Jeff at FAST.....amazing service and a decent turn around time too. He had my jugs back to me in about 2 weeks and i coudln't be happier. Send your jugs out to either of them and let THEM do the boring and get you a piston kit also. They can get you a better price on pistons than most shops out there and will have EVERYTHING in stock to do them. Plus that way they can do the porting also instead of having to have the jugs going out to another shop. Quote
MILO Posted March 20, 2011 Report Posted March 20, 2011 Herr Jugs gets another vote from me. Not that I would not recommend FAST either because I've heard nothing but good things about their work also. I sent mine to Kevin and have 0 regrets. I mostly ride trails too and he did an aggressive trail /dune port on mine. I have a 4 mil long rod stroker, custom cut 20cc domes in NOSS head, + 5 timing, .020 over, v3's, pro flow filter with no lid, and PC pipes. It is an absolute beast in the woods and trails. 110 gas is a bit pricey though. Call either Jeff or Kevin, tell them what you're looking for and they'll hook you up with the best port for your riding style. Quote
mike607 Posted March 20, 2011 Report Posted March 20, 2011 I searched the hell out of this subject about a week ago and, like everyone else already told you, Herr or FAST.... Quote
MN SHEE Posted March 20, 2011 Report Posted March 20, 2011 call both Jeff and Keven and decide from their, your gunna get great work from both of them and great customer service. Jeff did mine but Keven will do a great job too. Quote
toytech Posted March 20, 2011 Report Posted March 20, 2011 (edited) F.A.S.T did a 4 mill dune port for me and it runs strong!!!!!!!!!!!! and is great in the trails, Jeff will not cut corners to speed up production so in the busy season it can take a while, but worth the wait!!! I have also heard nothing but good about Herr Jugs racing. flip a coin and choose MN SHEE is correct Edited March 20, 2011 by toytech Quote
BigRed350x Posted March 20, 2011 Report Posted March 20, 2011 Kevin at Herr Jugs! You can't go wrong! Great guy, awesome work, fastest turnaround time. - Jared Quote
sstaton1983 Posted March 21, 2011 Report Posted March 21, 2011 send them to me i have a nice hand grinder lol... for reals tho i use passion jim really knows his stuff.and he lives 30 minuets from me. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.