225GUY Posted May 19, 2009 Report Posted May 19, 2009 I just installed an EHS Racing lid, which is the stock lid with the top completely open with the outerwears netting; which acts as no lid. With mods and jetting listed in my sig, will I have to rejet? Quote
225GUY Posted May 19, 2009 Author Report Posted May 19, 2009 Really??? I already have 300 mains and 27.5 pilots. Quote
BellicoseBanshee Posted May 19, 2009 Report Posted May 19, 2009 If your jetting is correct with 300 main jets, then yes, you need to increase the mains... Quote
225GUY Posted May 19, 2009 Author Report Posted May 19, 2009 It ran perfect with 300 mains and 27.5 pilots and was a nice caramel brown .... Now I put the lid on and it still runs great. What size jets should I go to? Quote
BellicoseBanshee Posted May 19, 2009 Report Posted May 19, 2009 The lid must not flow much more air than a box with a normal lid if it runs the same. If it is good, leave it alone... Quote
225GUY Posted May 19, 2009 Author Report Posted May 19, 2009 If i needed to reject and go with bigger mains, what would it run like then? symptoms? Quote
mdhc500 Posted May 19, 2009 Report Posted May 19, 2009 I made my own lid that looks just like theirs. I am at 1350 ft MSL and am jetted at 310's 27.5's... Mine runs pretty good now... You DONT want the plugs to be a really light color. Quote
225GUY Posted May 19, 2009 Author Report Posted May 19, 2009 I was just curious, so if I did need to go bigger on the mains, how would the bike run, symptoms>? Quote
shee4speed Posted May 20, 2009 Report Posted May 20, 2009 I was just curious, so if I did need to go bigger on the mains, how would the bike run, symptoms>? what is your elevation? Quote
mdhc500 Posted May 20, 2009 Report Posted May 20, 2009 Don't Know. Youngstown, Ohio. When I was lean it actually ran really well, however the top part of 6th gear it ran like crap... Look at the plugs or do a chop if you really want to know.... Quote
shee4speed Posted May 20, 2009 Report Posted May 20, 2009 I ran that lid for a short while and balieve 310's were in there at Glamis Quote
225GUY Posted May 22, 2009 Author Report Posted May 22, 2009 I havent done a plug chop yet, but now that the lid is on it seems like it has good bottom and good mids, but now it seems like it lacks some up top, like revs but doesnt pull as hard as before....lean> rich? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.