smokin350

I'm parting out my 4 mil this weekend and will have pics then! Everthing i have has been only been rode in Glamis for 2 weeks and 3 times here otherwise it sits all nice and pretty in my garage anyway here is a list of stuff i have. 1.Elka fronts with piggys rebound and comp adjustable 2.Elka rear with remote ressi 3.fluidyne radiator i think... i know it was 300-350 4.Alba +4 Chrome Swingarm with i believe mod quad carrier in anodized blue 5.lonestar +4 Chrome axle couple chips 6.lonestar front hubs 7.lonestar rear hubs 8.lonestar sproket hub 9.lonestar brake hub 10.lonestar locknut 11.lonestar brake block off 12.tusk polished shifter 13.IMS polished foot pegs with kick ups 14.IMS Heel Guards 15.Fly clutch lever w/cable 16.38mm Mikuni TM carbs w/cable 17.v-force2 reeds 18.Frame PC'D Black Chrome from NYUK never used 19.Trailtech front lights but chrome is piited alittle from using too high of nozzel on pressure washer LOL!!! 20.Alba 2+1 black arms that have been sitting in my basement have scratchs on them MOTOR: +4 mil cub with dune/drag port not totally ported to shit lol,HemiHead2,adjustable stator,barnett billet basket, straight cut gears,shifter mod, port matched case and epoxy cases,billet water pump impeller,true/welded 4_mil hot rods crank, all new internals,DD lockout w/sleeper clutch cover no see threw... I might be forgeting some things but i can tell you that i have it ripped down totally anytime i decide just to do pistons which is only 1 time and it didn't even need it i'm just crazy like that!! It made 99.7rwhp & 74.9rwtq on the dyno this bitch rips and the guys that have gone on the glamis trip not this past year but the 4 before that know this bike and will vouch for me!! I haven't thought prices yet but will have some up tonight otherwise shoot me some!! Thanks guys and sorry for the novel

In my honest opinion it's not what its worth it's what are u gonna get for it but if i had to say what it's worth it would be $5000.00 but your not getting that and sorry to be so blunt but this shit u have to know!!! i think if u find the right buyer you could pull $3750.00 but probably closer to 3 " I know sucks rite but thats the way shit go's"... Thats why it's a hobbie not an investment LOL!!! Good luck with ur sale!!!!

Sweet find bro i bet that thing rips, see what u have to do to put a +4 mill crank in there and then you'll be really shiting pants LOL!!!!!!! How much did u pay if u dont mnd me asking?

Holy shit 180rwhp, i have a 99.7rwhp and it's a hand full i couldn't imagine 180hp "OH WAIT YES I CAN LOL"!!!!

Nice bro, very sweet riding vehicle now all u need is ur banshee in the back and a enclosed trailer on the back with my banshee and a sandrail inside and were off to Glamis!!!! Sorry i was dreaming for a little LOL!!!!!! Sweet truck though....

I hear u on that it's f$%kin crazy, Elka got me for a $1000 and the guy was like "Oh i'm giving u a deal on this it's regularly $1295.00" Yea some deal that guy was laughing all the way to the BANK fuckin jerkoff LOL!!! On the other hand it's done and i'm happy with it and wouldn't trade it for nothing.. It's basically waiting to have the extra scratch laying around but then again 900 bucks just doesnt lay around Well at least not in my house HAHAHAAHA!!! Good luck with that LOCO!!!

Thanks guys i appreciate all the help!!!!!!

Thanks prerunner i was thinking something like that too!!! ok also i just ordered the steering stem replacement bearing and seals which come with 1 bearing and then the upper and lower seals, now is there something im missing cause im building a bike from scratch and i have the 2 seals, 1 bearing, 1 bearing retainer.. i think im missing something like on the bottom doesn't a collar or something go in down there between the bearing and lower seal??? does anyone have 1 of these??? Thanks guys for the help!!!!! Dominick

I was wondering if anybody new the size of alan key or hex head that i need to remove the nut thats under the seal on the steering stem or if anyone has any tips on how to get this out easier!!! i have it out just need to tighten it in...

ok heres the deal i'm building another banshee and i'm using the front lonestar hubs off my other banshee and when i took off the center caps i noticed the outer seal was mangled on both sides i guess i must of forgot to put the washers on before the main hub nut so it had some play side to side and must of eat the seal!!! where can i purchase new seals for this kind of hub or does it take the stock ones, im just not sure they kinda of look smaller but not sure cuase i havent had stock hubs in 5 years... thanks guys for any help i'll post some pics when i get home from work.

Well rite now i have a 4mil drag ported 38mm carbs and everything else lol on race gas making 99.7hp and 72 or 74.9tq, how do u think the power would differ from my motor to this motor, do think this motor will be like a light switch too or do u think it will have some more low end due to the the extra stroke and 35mm carbs?

What do u guys think i'm in the process of building another bike and this beast caught my eye LOL!!!! How much HP u guys think it is pushing , my guess would be between 112 and 120 let me here some guesstimates... If this is a HQ member hit me up.. thanks http://cgi.ebay.com/ebaymotors/Banshee-engine-motor-465cc-drag-cheetah-cub-stroker_W0QQcmdZViewItemQQhashZitem335714e29aQQitemZ220504318618QQptZMotorsQ5fATVQ5fPartsQ5fAccessories

I use finishing steel wool which u can get at Home Depot for like $3.00 for 10 or 20 pieces and make sure u keep the pipes lubed up while wiping it down i just use water and never had any problems or scratchs and it takes the surface rust rite out!!! PS. make sure it is finishing wool or highest grit of steel wool otherwise u will leave squirl marks!!!

I would say +4 would be the least you should go and +6 the most!!! I have a +4 with a ported cub and i ride sand and street, on the sand it's perfect but on the street HOLY SHIT it's a beast and picks up in every gear hahahaaha!!!!! I think after +6 u start losing that carving ability and your turning radius starts going to shit but then again who needs to turn point that bitch in the direction u want and hold on LOL!!!!!

Hey guys i'm planning on going again to this years Glamis trip and i was wondering if anyone from here is going and needs an extra guy with there crew! I live in Jersey so any of you NYC guys need someone extra or just wanna make the trip a little cheaper by all means hit me up thanks guys and JT hit me up if u found anyone thanks!!!

Like sleeper06 said definitly a difference in torque and when i was on the dyno with my setup i made 99.7rwhp with vito's fat bastards and 103.2 with shear outframes so not a crazy difference but noticable!!!

Ok i'm building a new banshee for Glamis this year and the 1 frame im looking to purchase has the mounting tabs for the headlight removed and the frame has been powdercoated a color that i like so my question is does anyone sell like a kit that has a way i could mount my trailtechs or laserstar's (i forgot which one they are but they have the mounting bolt going threw sideways like the stock one do... i don't really want to mount them on the handle bars so any help would be great i was thinking like something polished so at least it looks good to LOL!!! Thanks guys!! PS.. Bidding ends in a couple hours so i'll be checking the post freqently!!!

What about fixitrod and boonman good guys and they have alot of knowledge!!!! i think there was a guy called orangeshee he came up to coalfest the first time cool guy but i remember he didn't want to get his pretty shee all dirty (AAWWHH) LOL!!!!!!!

I'm here as well,I don't post alot but read alot and probably on here at least once a day!!! There's so much information on here u almost dont ever have to ask a question LOL!!! I remember MEAT, NYUK, JKJK, BIGWILL,BANCHETTA,JTQUAD, BENBB, i'm sure there's others i forgot.!!! I remember meeting aot of guys at the first COAL FEST up by MEAT'S house it was a good turn out with some sweet video's, man the good old days!!!

Yea bode i heard of this too, i read it in dirt wheels a couple years back and always wanted to go but if it's only friday night i'll never make it!!! There's no way of leaving my job on a friday that's the money maker lol!!! If anyone wants to meet up on Saturaday just to see what this event is all about and have some brew ha's i down for the drive!! It's usally like a 3 hour drive with traffic but if it's nice day maybe i'll take the M/// out (OOOOHHHH YEEEAAAAA) then i should make it in 2 hours flat but ive made it in a 1:45 at 2am racing my boys Zo6 basically the whole way down from my house but anyway if anyone want to meet let's plan some shit!!!

Yea baby going to Glamis again 5th time and it never gets old thats what i love about that place usally u get bored of riding spot after a couple weeks or even month but not this place or at least not for me!!! I still haven't seen everything, it's fuc&^n great see you guys there get ready to see a beast LOL!!!!

Yo infamous I would love to ride this weekend but i need like 3 weeks to finish my bike had a crazy wreck down at Big Wills a couple months back and I'm just ordering parts now but u know how that go's fix 1 thing and wind up ordering half a new bike lol!!! Bike should be done sion then will meet up down the shore exit 82 nice riding all sand, trails , hi speed shit (that's where you'll find me) but there's alittle of everything but u probably been there anyway I'll stay in touch!! My name Dominick PS September-October best riding!!!!!!!!!!

What's up bro, yea I'm from exit 152 and I drive down to exit 82 that's Seaside but u go the other way on rt37 about 10 minutes up the road!! I'll be at the wawa tomm morning at 9:30 if anyone wants to meet up!!

Going riding this weekend down in Manchester exit 82 off the parkway same exit as Seaside but in stead go the other way on Rt37 anyway talk about directions later and I know some of u been there. It's over by Bigwill's. I have like ten people who are camping out there the whole weekend but I will be going down on Sunday!! I'm sure there is gonna be a ton of people down there, for the past 4 or 5 weekends there been an average of 60 people there a day and this weekend probably a 100 or more! If anyone is interested send me a a shout my names Dominick I'll be down there with the blue beast 103rwhp & 74.6rwtq LETS PLAY!!!!!!!!!