locogato11283

if there oil where the stator cover is i can only assume that the crank seal on that side is bad. thats probably why its not running properly. sounds like you need to tear it down.

have you already bought the kit? if not i would recommend going with cub cylinders. they use all your stock parts and are amazing right out of the box. plus you can find a set of used cylinders for next to nothing.. t-rex are kind of a pain to run. i know k&t makes them faster than hell but thats with a lot of porting and extra work. plus the pistons those things use are heavier than hell..

if you havent been running high octane fuel theres no need to start now unless youve bumped up your timing or compression.

by the way, youre a fuckin idiot. in tanks fight against gary turner in april 2007 tank weighed in at 293 pounds. in his fight against kimbo he weighed in at 263 pounds.. you should really do some research before you run your mouth.

i do agree that kimbo has a ways to go. hes only got 3 fights under his belt and while they were wins they def werent against the best opponents. here is where i think kimbo will prevail. the guy has a shitty background. comes from street fighting to mma where he is training hard and very seriously. i mean, not every brand new fresh mma guy gets to train under bas rutten. bas is a smart guy and was a great mma fighter. i dont think bas would take his time to train kimbo to be a nobody, and i dont think kimbo wants to be a nobody in mma. ive read on this post where people say hes just a brawler, but thats absolutely not true. ive seen training videos of the guy and he knows what to do when the time comes to go to the ground, he just hasnt had that happen yet. and it might even take a loss for him to really see where he stands, but right now hes on top of his game doing what he needs to do to win. people also say his striking is not good. bullshit, his punches to tanks were very crisp and accurate. anyone who disagrees needs to watch the fight again. and not that many people have knocked out tank. tank has a hard chin, and kimbo knocked him the fuck out. id say that kimbo's striking is pretty good. also, anyone talking about the sean gannon fight needs to get over it. that fight was stupid and means nothing. that was long before kimbo knew anything about conditioning or ground game. that fight is irrelevant. kimbo has excellent trainers now, so for someone to think that he will be subbed immediately or that he has no chance on the ground is fuckin stupid. kimbo is a beast at 235 pounds. he's lean, very strong and has the determination to be an excellent fighter. sure kimbo will probably lose to an experienced hw fighter, but name me one hw fight besides fedor who hasnt lost to another hw fighter? i mean, everyone acts like that when kimbo loses his career is over. get real. as fas as im concerned a loss will only make kimbo meaner and smarter. i cant wait until this kimbo shows up. i look forward to kimbos next fight and i dont care who its against. the guy is super nice, watch his interviews, and has a ton of heart. i hope he goes far in mma.

haha some of this shit you guys are posting is funny. its obvious some people have no knowledge of anything mma except for what they see in ufc or whatever is free on tv.

ahahahahaa

get a roommate man.

yea i think you should be fine getting newer parts. as far as i know nothing changed from 95 till now. pm NYUK. hes prolly got everything you need laying around.

i think its just personal preference really. some guys start out using mikunis and stick with them the same some people start out with keihins. the keihins are very common and tons of people use them. you can usually find a used set really cheap. thats prolly part of the reason a lot of people run them. with that being said i would go with a keihin 35mm pwk on your engine. they are easy to tune and we can get you right on with jetting here.

tell us your engine mods, sprockets sizes and tire size and we can tell you pretty close how fast your bike will go.

i pick none of the above. the best tires ive found are kenda knarlys and stock yfz450 tires. they both hold up better than the other tires out there and they are cheaper.

i always used bikepics.com. that site always worked for me pretty well. now i just upload my pictures to facebook and link from there. i dont think ive ever attached a picture on this site.

rmatv sells tie rod ends. thats probably what id do. problem is that they arent chrome. but i think you could polish them up yourself somehow.

i wouldnt bid on anything i couldnt see. get some pics or at least look for yourself.

any machine shop could make those pretty easily.

thats sick

this kid is who i like to call a "fucktard".

you dont wanna try to rig up any powervalves. if you really want a good strong woods motor then just contact a builder about doing a woods port on your stock cylinders for you. my brother had one a few years back and it was awesome in the woods. tons of low end grunt.

what surface you racing on? i used to have a predator and it wasnt slow by any means.

gettin sick of BT years ago??? you been here since oct 07.. thats like 4 months..

neat looking, but way overpriced.

even this was a tight squeeze. banshee frames are just too short.

ive had a lot of boots but i settled on my alpinestar tech 6. i wouldnt waste my money again with anything other than alpinestar.

terrible idea. a lot of fabbing involved. better off getting a raptor frame.