locogato11283

well its that time again for another ufc.. pretty good card too with wand, nog and cro cop on it.. nog/cain - nog/sub/round 2 or 3. i havent seen that cain has the power in his hands to tko nog and we all know he can take a severe beating and still pull out an amazing sub. i think nog wears cain out and subs him in round 2 or 3. cain is still green and has never fought an accomplished BJJ guy like nog. wand/bisping - wand/tko/round 2. i think wand learns from hendo on this one and keeps the pressure on bisping. bisping likes to dictate fights and as long as he cant do that he gets frustrated. wand looked good at the weighins. im hoping that bisping comes in to win instead of coming in to not lose like he did with leben. joe daddy/george - joe has looked good since going to jacksons camp. he can always push the pace and take a beating. i havent seen many of georges fights but i hear hes looked pretty good in his last few. this could end up with a ground game and us seeing who has the better BJJ. i cant call this one. tardine/bader - tardine/tko/round 2. i think tardine breaks him down with leg kicks. bader has good wrestling but i dont know if its good enough to take tardine down and hold him there. crocop/perosh - crocop/murder/round 1. never even heard of this replacement for rothwell.. im hoping cro cop comes in with his killer pride instinct and kicks this dudes head off..

its a little early to assume the top end is no good. first you need to get your new air filter. then you need to pull the carbs and clean out the pilot and main jets. in most cases, the problem lies in the carb jets not being clean.

damn, this is not looking good. the so called new parts are def not new...

i always stay away from anything maxxis or itp. almost all of their stuff is overpriced and overrated. i run kenda klaw fronts and like them a lot. here they are at rmatv for $45 a piece. http://www.rockymountainatvmc.com/productDetail.do?navTitle=Tires+and+Wheels&webCatId=8&navType=type&webTypeId=138&prodFamilyId=5386&listingId=&custPropAttr4=4&sizeAttr=144#vehicleSelect alf44 here on HQ is a dealer for rmatv and might be able to save you even more than that.

ttt

while i agree you dont really need straight cut gears, i think the billet bowls are a good idea. its not going to hurt you to have that extra fuel. i ran a set of 39mm pwk's dry with my 10mm cub one time. bought billet bowls and it never happened again. and that was on gas.

i would ask jeff, but i can almost guarantee he will recommend 33 or 35mm pwk.

lookin good.. i forgot about this thread.. anyone have anything else?

your friend is only telling you that because he doesnt want you to beat him in a race.

i always have and always will run the vforce. i know a lot of guys run the boyesen on low end setups and have good results. the vforce have been proven to make more power on the top end. i havent heard anything about pyramid.

ttt

dude cant be serious. doesnt it cost you to list something?

whatever, that shit is fake..

i concur.. looks like the ct to me..

i have heims on my quicksand arms.. ive been lucky. they are still in good shape and dont squeak.. when it comes time for replacement im going with ball joints for sure.

uppers

all i know is that for the price and hype of those tires you should not have to groove them to make them work better. they should fucking come like that. personally, id stay away from junk tires like those.

putting a motor in there will drop it down some. are the shocks ride height adjustable? do they have threads on the shock bodies where you can screw them up or down? if so, screw them on up and it will lower the ride height.

looks like its right then. ive just never seen one stick out that far before. do you have everything behind it that goes there?

grab a new cable and ez pull clutch lever.

mark, the guy is from the pacific northwest so hes right up in your area.

there are guys with a lot less power than that 10mm twister that run a lot longer swingarms.

you can use an outside image hosting place or you can use your hq gallery. either way, you will need to use the image location and use the image tag located above. its the one that looks like a picture, to the left of the envelope.

haha thats part of the porting. its supposed to be like that.

the bike will just be more stable from front to back for sure. i like the longer swingarm especially for hillclimbing. there is no substitute for good suspension.