locogato11283

I never ride without hooking the tether up. It's cheap insurance.

Get what back? Tha VIN isn't engraved on the frame. If I recall correctly, it's just stamped onto the frame after it is painted. You're not going to find anything by scraping the PC off other than metal.

The VIN is not engraved into the frame. If you grind your PC off you'll be wasting your time because it won't be there.

This isn't going to work nearly as well as you think it might. Sure, stomping down on the shifter may seem like the quick thing to do, but what about when you're on the throttle hard and trying to hang on to the bike. The forces acting on you will be forcing you off the back of the bike. Having your foot under the shifter to raise it works to your advantage. Trying to hold yourself on the bike and then raise your foot to stomp down is going to be hard. Doing this accurately with riding boots is going to be even harder.

It should be right under the motor on the shifter side. If the frame has been PCed though it is probably gone. I'm sure it has been bead blasted right off there and had PC put over it.

That was definitely a nice bike. Looked good and ran hard. The wheelie bar is scary in the rough stuff but the rider took it like a champ.

A 4mm Cub setup right would spank this pile of junk on the street or in the sand. That is not opinion, that is FACT. If this bike has been up to 150mph numerous times, where is the video? Talk is cheap, I want to see video of it going 150 mph. And no, that is not a Banshee.

If you didn't have your items how would you know there's a defect? What all did you buy? And how did you even know the guy had stuff for sale? I'm lost here..

The Ultimate Warrior

Welcome to BansheeHQ homie!

I've never had a chain slider or swingarm where the slider didn't need spaced out with some washers.

The chain should go over the roller.

Wow, I didn't even notice that. What. The. Fuck..

A little bit of a difference isn't going to matter, but that looks pretty drastic to me. Do you have any other type of slider available to try on it just to check to see if it's the swingarm or the slider?

Why do people do this? Your builder recommended a certain pipe for his setup and you totally disregard what he said. Just go with T-5's and be done with it.

Cases look trenched to me. See the front and back where the rod goes..

You need to run whatever Andy tells you to run on that setup. Every builder has their preferences for their motors. They have all fine tuned their own motors with certain parts. It would be best to talk to Andy about what is best for this setup.

Call FAST Racing. Jeff sells chain by the foot and can get you just what you need. 785-364-5325. Tell him the CEO of BansheeHQ told you to call. Also, for future reference, Rocky Mountain ATV is a much better place to buy odds and ends bullshit than Dennis Kirk. Give them a try also.. www.rockymountainatv.com

That's the kind of stuff I grew up climbing. The timed hillclimbs are different than that. You get more run and the hills aren't as steep. If you've been climbing stuff like that you wouldn't have any problems climbing any of the hills in the AMA circuit. You probably won't be as fast, but you'll make it to the top just fine.

At the top of the second pic I see it says "ktkid." There is a member here with that same name. You might shoot him a PM. I'm betting he either owns this bike or knows about it.

Welcome to BansheeHQ I hope you're prepared to go broke modding your new bike! When was the last time you messed around with Banshees? the aftermarket is HUGE for them now.

Damn. Doesn't even look like the same cylinder. Nice work Jeff!

Papers? Must be an east coast thing..