Jump to content

locogato11283

Admin
  • Posts

    54,065
  • Joined

  • Last visited

Everything posted by locogato11283

  1. You don't want a bunch of side to side slop. It should spin freely with no wobble. If it will twist at all on the shaft, replace the bushing.
  2. You may need a clutch, but what you're experiencing is typical for all of our DMs. The clutch gets hot quick and the fibers swell. That's why you lose your clutch. If you adjust your perch out more you will get it back or simply let it cool down. I'd say that's pretty normal. How much weight are you running on the lockup?
  3. That free shit is awesome. I pick up those Tyvek bags by the box load. Then I use them as packing when I ship stuff FedEx.
  4. Fuck that! See you guys in September!
  5. Looks good. You ever think that lower rail of the sub-frame might bend upon a hard landing on the seat? Mine is basically the same as yours, but Tim thought upon a hard landing I would bend the lower rail. He put in a piece between to help out.
  6. What the fuck does that even mean? The tunnel? Those are some pretty vague rules.
  7. That shit is fucked. Air bags FTW!
  8. For riding in circles.
  9. That's a sick set up.
  10. I looked them up. Two pages but I never saw any pics of her.
  11. Is that her for real?
  12. Fuck the pipes. Let's see the chick.
  13. Pretty sure you need to flip them..
  14. Is your air filter clean? Have you checked the plugs?
  15. I heard that chick is hot but dumb as fuck.
  16. Build a Raptor. I have a website for those too.
  17. I would definitely let Cam make his recommendations for the motor. As far as the sand, we have a ton of Michigan guys here who can tell you exactly what you need to run for the conditions at Silver Lake. I am going to add Silver Lake in your title to help your views.
  18. Yep, you're crazy.. Stock bike should work fine for you.
  19. Yep, they're junk.
  20. First, lose the boost bottle. If start at 290 main, 27.5 pilot and needle in the middle. Air screw .5-2.5 turns out.
  21. If this is a stock trans, it can be replaced for less than $200. That's if the whole thing is fucked. Drain the trans oil. If something is broken you will most likely see pieces coming out. Then pull the clutch cover.
×
×
  • Create New...