ledofthezep

On top of what's been suggested, you may look at a bigger radiator to keep'r cool...maybe a bigger gas tank, if night racing in the desert you may also look into a higher powered stator & some better lights.

I'm game.

Good to hear.

If I can find another in good condition I'll probably get me another. I miss mine.

If Frocash doesn't get that clutch cable & exhaust o-rings from ya,...ya may shoot me a line.

It's a diesel...with rabies.

Some of you may have seen this before...my bro-in-law just emailed this to me & I figured I'd share it w/you all. Pretty damn kewl,... This is a F-350 FORD He has a twin turbo set up and a 16 valve dodge cummins motor swap with an alison transmission. He also has a stock bottom end with a ported head and running around 92lbs of boost. The truck weighs around 7500 lbs and runs 36" tall mud tires. http://www.olypen.com/bulldog/movies.html/F350Run.wmv

Right on man. Over 4 years working with Internet/IT/Web/Graphic Arts....I'm still not making that. Congrats!

Probably your best bet.

Get a Toomey 2:1 w/UNI filter with a waterproof outerwear. I've been the K&N Clamp-on route & they did ok, but were a PITA to clean & maintain,...and don't like moisture.

I've ran both the K&N Clamp-ons and the Toomey 2:1 w/UNI filter. I'm still using the 2:1 & prefer it over the K&N's...less maintinance, easier to clean, & filters just as good, if not better IMHO.

400EX wheels interchange just fine with my shee! Did I mention I run a Honda axle & hubs?

$168 King's Turbo Paddles....just as good if not better than the haulers. I have both....wouldn't spend $268 on a paddle again when I can spend 100 less and get just as good of performance. I've not found a site to buy them online at,...I got mine at Jim's in Waynoka, Ok. http://www.jimssandtoys.com

Started at 3 on a trx125 w/no suspension.... Moved to a trx 200SX - one pimp ride, trust me... Then moved up to the banshee world... ...old pic...1st trip @ the dunes with my shee.

I have Thor T-30 boots & Thor Force Chest protector....getting their new kidney belt for X-mas & new pants & jersey.

It's bright! Kewl....

Bet that's one spooky ass ride down the strip!

His old screen name on the old HQ was 'csaver' - [email protected] I got one from him & it was like aroud $21-23...something like that, but I had it in 2 days at my door. He used to have them on Ebay, but I haven't checked to see if they're still there. Ride on! LedoftheZep

My g/f's shee has the graydon 2:1, doesn't look like it'd be too hard to make if you're a good welder. I'm at work & it will be a few days before I could get you any measurements since the shee is out at her parents right now... What exactly are you looking for?

Me too...

Really....I've had absolutely no problems what-so-ever with my Barnett Dirt Digger. Installation was a cake-walk & it hooks up awesome, no slippage or anything. I've never heard a bad thing about them...until now. I'm going to get one of the Tusk clutch kits w/HD springs out of rocky mtn. for like $35 for the g/f's shee....will post my thoughts on it after I install & try it out.

...what Smokin' Shee said.

I'd say it's leaking antifreeze somewhere...I'd check the head gasket & like you said...the o-rings in there & make sure nothing cracked while shee sat. Couldn't tell ya w/the plugs, wait a few & surely someone can tell ya--good question.

Ok,...so your torrs is disconnected, but you still have the parking break? Dunno if that's what you meant or not...if you still have the stock clutch perch...follow the wires off the perch down to the left side of the gas tank where there is a little plug, disconnect that plug & tape it off. Try that, if applicable.

I hear that....just finishing up some of my college crap so I have that little piece of paper that says I know what the hell I'm doing in case I get sued over some stupid shit. They can't justify what they pay me for what I do where I work...and they have pleanty of $$ I know for sure. I suprivise a internet & IT support team, am our graphic designer & web designer. How many people who do that shit do you know that struggle to get by?...I'm lucky to bring home 23 or so a year. It's complete bullshit & no one will tell me it's not. I paid like 3 bucks one time to have a financial company analyze what I do as far as my job & capabilites...even without a college degree with the work I do I SHOULD be making 35-40k a year. Yeah right...try & tell that one to the boss. I get screwed...but with the economy the way it is today, it's hard to find a job that will give me insurance, that's the main reason I'm hear...but just recently they dicked us on our insurance too, so now I have shit for insurance--but at least I got it. I could go on but it's redundant, just pisses me off thinking about it.