ClaudeMachining

Be a trooper, help him and dont ask questions lol!

Ported 128/188... Timing not as cast. Nice numbers tho.

Here is Bill's Reply: '...Claudes cylinders are as cast in duration like he said 189/122. I ported the intake, transfer tunnels, matched the transfers to our gasket that fits the cub cylinder and cleaned up and polished the triple and main exhaust ports with out changing heights. With the lower port timing and sniper pipes the peak rpm is going to be lower than the high porting timing bike we tuned recently that was at like 10,500rpm peak with shearer small bore pipes. Without any dyno time with snipers I cant predict what they'll do but Id think both differences should pull the peak rpm 1k or so giving the front side of the curve a little better...'

Dont always believe what you read on the internet. ;-) Zilla, it's not a joke, the LP are set to 189. Bill already say it in another of my post and I'm too lazy to dig it.

Lp 189, not 191

Lp is 122/189, serval is 126/188

I started with lp for a reason. We can go up, not down ;-)

I think ported Serval at 85hp are common. Redline advertise them at 85hp ported.

Bill did mine. The timing is 'as cast' but he did everything else (intake, exhaust, tranfer) I was expecting about 85hp on pump. You got 75hp with 110... So i'm lucky if i got 70hp on mine, wich is far below what i expected. Serval on pump gas are doing 85hp all day.

Shit, i expected higher hp numbers with the snipers/lp combos.

Man up you pussy!! Let me bully you, the gentle way.

my guess is you gay.

I am at +5, with 23cc, pump gas, snipers. You should go over 90hp

Setup similar to mine, I'm looking forward for the dyno numbers/curves

Yeah, beer ride = joy ride ;-)

I think you got a lot of good info soo far, isn't it? Your front suspension setup is shitty, Nick even gave you an explanation on the 'why', take it like a man, nobody will sugar coat things here. Welcome to BHQ.

Oups, i forgot.... ;-) Beer ride ftw!! https://youtu.be/iXeqXK9b5e8

I think the unknown thing is the 'proven' part. No complain sor far but not as many setup vs cp cyl yet. I like mine. Envoyé de mon GT-P5113 en utilisant Tapatalk

You gay.

Man, i like your product, i was just asking questions 'cause 304 is cheap. Man up a little bit ;-)

Noice, we can play Chess on that!

I know that 304 and 308 are almost identical and 304 is cheap, why use 308??

Make love, not war!

I was not aware of that technology, thx for the post.

I'll try to find that bimotion thing....