ClaudeMachining

Talked to Cam. He said money wise, you can't justify LED over Shearer or Snipers, they will make a couple more hp but very pricey. But like me, he said they look bad ass, so i go with LED ;-) He asked what type of frame im using, type of riding, my weight etc.. Pwk 39mm with a cable. I forgot to ask about 41mm... On Avgas, should be around 120hp. Envoyé de mon SM-G935W8 en utilisant Tapatalk

Will call him this week. Envoyé de mon SM-G935W8 en utilisant Tapatalk

That's because i need more than one and it was obvious! ;-) Envoyé de mon SM-G935W8 en utilisant Tapatalk

It's just talk, i will follow what Cam will say. Envoyé de mon SM-G935W8 en utilisant Tapatalk

I was kind of debating if i would try 35mm or go 39mm. 41 is big. Envoyé de mon SM-G935W8 en utilisant Tapatalk

I was not sure if Control was using LED. I'll go with LED even if they are not the best. Envoyé de mon SM-G935W8 en utilisant Tapatalk

Here is my buy list so far: Super Serval jugs, ported at Redline. Super cub head, domes setuped for AvGas CrankWorks 10 mill crank (is there other options?) Straight cut stock ratio gears. Pwk 39 Roll design A-arms Fox float Evol rc2 LED pipes, because they are goergous. Hiper cf1, 4+1 front and 3+5 rear. Thats about it. I ride open road/trail most of the time. Did Cam built 521 with LED so far?? Envoyé de mon SM-G935W8 en utilisant Tapatalk

Nope, i emailed Arlen and he said 1700$ with silencer. Envoyé de mon SM-G935W8 en utilisant Tapatalk

Thank you sir! Envoyé de mon SM-G935W8 en utilisant Tapatalk

I know, that's what i want to do, i emailed RedLine but no reply yet, so i'm looking for another option. Dont say 'call him' , i will not call him, i better like to write than talk in english.

I'm about to order stuff for my 2018 setup. I'll put roll Lt and Fox shock, 'cause i like the look of the roll design a-arm and dont care about how munch they cost. Same thing with pipes, i will put LED pipe on my engine for the very same reason. Now about the engine. I want to try a Super Serval 521, so i will need, head, jugs, crank , straight cut etc... Who's bulding good Super Serval setup??

55$ shipped, like usuall, i will not make that munch of those. Envoyé de mon SM-G935W8 en utilisant Tapatalk

They will work!! Envoyé de mon SM-G935W8 en utilisant Tapatalk

^^This. Thats why mine doesn't have the bulky hose in it. It dont need a thick tube 'cause my clamps are dual diameter. More machining time, but the clamp is easy to put on and off and seal perfectly. Envoyé de mon SM-G935W8 en utilisant Tapatalk

I got about 250L burned so far and my exhaust temps are high and they hold pretty good. I can also give the name of the place where i got the tube, so you can buy some spare. Envoyé de mon SM-G935W8 en utilisant Tapatalk

I dont have experience with banshee pipe. I dont know if fmf fatty fit them. Like i said, if you measure them and if they are close to 1" and.1.125" i have very nice clamps that no other one are making, dual diameter, easy to put on and off. Envoyé de mon SM-G935W8 en utilisant Tapatalk

What pipe you got?? If you have pipes with 1" and 1.125" tube diameter, i got some nice one. Envoyé de mon SM-G935W8 en utilisant Tapatalk

Sadly, Nick is right. I have over 12K$ (CAN) on mine and i'm not sure if i would get 6500$ (can) for it and it have way more goodies than yours. It's the market, dont blame us. Maybe you can sell it on craiglistfor that price, but it will NEVER happen here.

The dumbest counter part of far right.

Ya personne de fiable pour porter des cub au Quebec? Envoyé de mon SM-G935W8 en utilisant Tapatalk

As you can see, different strokes for different folks ;-)

Driveline offer an upgrated clutch assembly iirc Envoyé de mon SM-N910C en utilisant Tapatalk

Yes. I dont use the clutch that munch to shift anyway.