Jump to content

gusto

Members
 View Profile  See their activity

  • Posts

    2,406

  • Joined

  • Last visited

  • Days Won

    47

 Content Type 

Everything posted by gusto

  1. gusto
    No
  2. gusto
    Ya know who’s gonna have a puck style? HP2000
  3. gusto
    Noss 1 piece now? i recommend Chariot
  4. gusto
    http://www.hsdracing.com/Yamaha-Banshee-GPR-Steering-Std-Low-Boy-Damper-Blk-Prodview.html
  5. gusto
    LSR is top notch
  6. gusto
    Nice
  7. gusto
    will the engine be dyno'd while at redline? WHat pipes and carbs?
  8. gusto
    Looks real good
  9. gusto
    And this is why I’m running 28s on my serval and have a Clarke tank
  10. gusto
    I believe on PaymentPlans 521 the stamped snipers performed as good or better than the hc LEDs. Might save you a bunch of cash depending on your engine
  11. gusto
    Weird I was Just looking at some LEDs today on a buddy’s 18 DM up here in the Greta white north. Huge fan of NPP. He is local, not a banshee guy but his snowmobile stuff and kx500 cr500 pipes are legendary. HPR19 is the tits. I ran an AAen on my zilla , couldn’t afford Jerry
  12. gusto
    Also what bore are you on? Might not even be worth the work if your going 66mm over or more
  13. gusto
    Take a pic of your porting and post it on here. Might not even been ported. use stock carbs on 4 mil. They work great
  14. gusto
    Is this engine running or being built? I had a similar engine with the same pipes. You can get away with 21cc domes but I would go 22. Pilot will be 27.5 and a 320 main should be safe to start. Try your slides in the middle position.
  15. gusto
    Like it yellow also. Looks good
  16. gusto
    don't do it
  17. gusto
    I would put that into a arms and shocks. Your engines done good enough fofor trails. Switching to SLP would make a massive difference over the T5s
  18. gusto
    Pull off your carbs and clean everything real good, I think your floats are sticking. Reset your float height, buy carb kit and then let us know what jets you have. Have a look at your cylinder intake area and let us know if you see some porting. You may need a jetting increase. Regardless, pull off carbs and clean them.
  19. gusto
    All the Chinese cylinders I seen have had rough castings compared to OEM. Very visible. That being said I have heard if your going to be doing some porting they are not a bad option.
  20. gusto
    You gone loco esse. too bad your not listing these in the fall
  21. gusto
    Kawa find sheeriders thread on this he shows the milking needed on the inside.
  22. gusto
    Has the Honda throttle had the milling that’s needed done on the inside ? Might buy that since your shipping
  23. gusto
    Cheddar sent
  24. gusto
    77$ shipped to AB Canada for stabilizer ?
  25. gusto

    PT pipes

    gusto replied to sheerider11's topic in Wanted

    Never even thought about the extra room PT bring, ya I see what your saying Rob. schweet97z, give me a basic comparison of the two?

BHQ Quick Links

×
×
  • Create New...