Jump to content

hoppedupandcutdown

HQ Premium Member
 View Profile  See their activity

  • Posts

    3,464

  • Joined

  • Last visited

  • Days Won

    73

 Content Type 

Everything posted by hoppedupandcutdown

  1. hoppedupandcutdown
    If he ditched the stock box for pods, make sure you have bigger main jets. You could be starving for fuel on the top end for sure,or melt it down.
  2. hoppedupandcutdown
    the cap has two seals, one above the hose and one below, Yes get a new cap.
  3. hoppedupandcutdown
    Exactly what did you use?
  4. hoppedupandcutdown
    Do you have the slides in the correct cabs? The caps should always be tight, check for air leaks, and don't let it idle for 15 mins, it has no cooling fan.
  5. hoppedupandcutdown
    I use a cheap vacuum/low pressure gauge from the auto parts store.
  6. hoppedupandcutdown
    awesome dude, really
  7. hoppedupandcutdown
    http://jdscustoms.com/Yamaha_Banshee_CDI_Relocation_Bracket_.htm Is the one your after look like this one?
  8. hoppedupandcutdown
    http://www.ebay.com/itm/140914244671?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649 I've been watching these, good deal even with the shipping
  9. hoppedupandcutdown
    625 views, should of held a raffle for this, 50cent tickets, you'd been money ahead. BUMP, for a good jack, mine has never let me down.
  10. hoppedupandcutdown
    http://bansheehq.com/forums/index.php?showtopic=140912 Look at post number 3 and 9. make sure yours looks the same. Buy a manual.
  11. hoppedupandcutdown
    It's not a pressurized oiling system, and that is at the very top. I would think you will be OK. If you find your left pant leg is oily, stop and check your trans level.
  12. hoppedupandcutdown
    http://bansheehq.com/forums/index.php?showtopic=140912 picture/post number 12
  13. hoppedupandcutdown
    clutch actuator seal. You will have to pull the clutch apart, remove the ball and rod, then that will pull straight up and out. new seal on top there, done. Degrease everything first.
  14. hoppedupandcutdown
    Little Sahara sand dunes are like a blowjob, maybe not the best, but not bad at all. I'd rather my dunes have no teeth than drive to Cali and risk the dunes having an adam's apple. It's a metaphor...
  15. hoppedupandcutdown
    Is it possible those 190's have been drilled out? That just don't seem right.
  16. hoppedupandcutdown
    Just a thought, might check the vent hole on the top of the slide...make sure its not covered by the bracket that holds the cable on.
  17. hoppedupandcutdown
    The Yamaha parts fiche I used showed the 84 RZ350 shared the same part numbers for the shaft, washer and nut as the Banshee. Post some pics
  18. hoppedupandcutdown
    Last I spoke with Andy he quit messing with them , cuz they're flaky. I called Full Bore direct and they said they only had raw materials to do blue and orange, at that time. I would definitely only order from someone that actually had them in stock.
  19. hoppedupandcutdown
    Yamaha actually calls for motor oil for the clutch. It will ALL work, just be sure it does NOT have "friction modifiers" Out of this group on here, EVERY oil ever made has been tried and everyone has a preference,with varied results.
  20. hoppedupandcutdown
    Yes it is normal. Make sure to put the bowl with the "BB" on the outside on that carb
  21. hoppedupandcutdown
    OK then, re-do it now. Truth be told I'm not happy with mine either. It's a very vibrant color on the side of a car, but with only small tubing showing it's WAY darker than I expected. I keep telling myself it will be fine, but, it will get re-done this winter. my 2cents.
  22. hoppedupandcutdown
    Same options on mine, black/black, front disc brakes, 2 owner car, only had rusty quarters... Man, I wish I had that car back now.
  23. hoppedupandcutdown
    I shipped a '67 Mustang GT to AU, and filled it to the brim with restoration parts. No problems at all.
  24. hoppedupandcutdown
    http://www.planet-9.com/porsche-tires-wheels/72456-formula-43-racer-red.html I still sometimes amaze myself, goggled your color for some more pics and found this. This is why I hate selling paint jobs from color chips, especially ones off the internet.
  25. hoppedupandcutdown
    Your frame looks a lot like Porsche guards red to me, one of the brightest reds you will find. I've sprayed a lot of it. I think it will be fine once you get all it's clothes on. Unless you really want a more Hugger orange.

BHQ Quick Links

×
×
  • Create New...