thomas h.

I used a temp gauge adaptor coupler and instead of installing the sending unit just add a 1/4 or 3/16 hose barb. I think it about getting and air out of the head

And some time the connectors on to the coil get loose. Rebend the contact maybe and some dielectric grease

Do you have a key switch? Could be suspect also check your kill button and tether. If you haven't already clean out your harness of old stuff like tors lights and other non imporant stuff and look for damaged wires

I could maybe make it and bring this one Are you going to sand sport super show? Next week?

Thanks guns

Next is the get rid of yellow

How goes your conversion ?

HJR just finished my ported 4 mill and it's a scary diffrence. Dont oforget the case porting and head /custom domes.

Did you check your reeds?

HJR can hook it up too

Do you need a yfz450 skid plate 2004-2004 by slim chance?

If you are looking for a San diego bike I'm going to convert mine. I live in San Marcos close to baja desings. Have to banshees one stock and one hybrid.

No pic here

A place like off road warehouse would have tabs for seat belt or shocks that are ready to weld in all diffrent sizes so you could pick what would fit and look good. Or eBay

The check connectors to the coil and clean rust away from coil ground contacts.

I also considered doing the pipes like that but I though the noise would just kill me. FYI if you can drop you bike at Matt shearers shop he can do custom pipes for 585$ raw

Sniper is newer and I haven't seen many dyno sheets on them but shearer has more peak rpm than the rest.

Couldn't really see what's what. Any specs?

X2 oem

More good feedback I picked up some exhaust clamps and it was a good price thanks bro!

Went to shearer to drop off quad so they could do some custom ones on my shee- brid. Custom made for the off the shelf banshee price. Matt shearer has a dyno and can build a pipes to what your bike needs.

I work on garage doors. If your door has windows they will punch the window and pull the release cord. If you do not have window they will push in the top of the door( it will flex 2-3 inches) and fish for the release with a coat hanger. Not recommended because of fire entrapment but you could wire your release closed and cut it away if you need to open door manually. Or purchase a Liftmaster 3800. This motor rocks because it is side mount and has a sliding bolt so it would be extreamly difficult to get inside. Thanks for the heads up on delivering bikes I have a ltz 400 for sale now and I have delivered to Craigslist customers in the past ( no issues).

Done deal