Jump to content

sstaton1983

Members
 View Profile  See their activity

  • Posts

    479

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by sstaton1983

  1. sstaton1983
    Sucking in trans fluid. sucking in trans fluid.
  2. sstaton1983
    If you go 4 mill you may as well go cub while your at it. Depending on how your cylinders are set up you may need new cylinders anyways.
  3. sstaton1983

    How To Basic-

    sstaton1983 replied to fappy'97's topic in Humor

    donkey punched that watermelon. holy shizer.
  4. sstaton1983
    I'm the builder and were going with a tripple and switching to a paddle tire.. Jk:)
  5. sstaton1983
    Come out to white field for some draggin' Alot better sand.
  6. sstaton1983
    . I went their on some extremes, ill never do that again. Way to many rocks!!
  7. sstaton1983
    Possible ignition breaking down at higher rpm.
  8. sstaton1983
    rotary valve?
  9. sstaton1983
    Anyone have specs on this rotax?
  10. sstaton1983
    That little motor is about 65 hp if i remember right. so maybe a sick and dying 421. if your referring to a cub.
  11. sstaton1983
    He said its a neither, I believe he said its for just riding and playing..Some people get an idea to stick random motors in places they don't belong..some run good, 99% of the time they don't.
  12. sstaton1983
    Thats where I wasted all my time on my sno mo bike. Belt would always loosen up. I went through a few belts tuning on it. Then the motor would over heat in Oklahoma weather. You will be better off spending your time building a banshee motor.
  13. sstaton1983
    WTF Are making a dragger or trying to get shit to fit in it?? There are a lot of frame mods some are for duning , drag racing,some for mx and so on.
  14. sstaton1983
    Is it off a Sea Doo?
  15. sstaton1983
    Never mind mine was a type 537.
  16. sstaton1983
    I ran that motor on a Suzuki LT 250. Making room for the clutches and belt is a pita. If I remember my motor was 90+ hp with twin carb and pipes.
  17. sstaton1983
    I agree I started my wife on a 660 raptor,then she rode a Banshee and never looked back.
  18. sstaton1983
    It's happened to me..
  19. sstaton1983
    A Blaster is a good starter bike , if you plan on putting her on a Banshee later.
  20. sstaton1983
    Gotta give props to my old 250r Honda, I sure as hell couldn't kill it. ( it was a atc)
  21. sstaton1983
    Yep, they will check the bearings and play when it gets balanced and welded. If you can feel any up down play it probly needs rebuilt.
  22. sstaton1983
    What"s the compression? Also check to see if the main jet is laying loose in the bowl.
  23. sstaton1983
    Cpi's sign off a little sooner then shears from what ive seen.
  24. sstaton1983
    Has it been trued and welded? Send it to a sponsor and have it checked and welded. You should see side play with no up down play.
  25. sstaton1983
    I have owned 2, neither had the original motor. One was sno mo powered and the other had a zx9 motor. Both were hack jobs.

BHQ Quick Links

×
×
  • Create New...