sprinklerman

Also.... A street can't load the motor properly if your on knobbies. You'll just spin and not get a good feel for what it's doing ..or going to do ,when you get it hooking up hard.

...hmm...I guess it's BAC to a JJ&A?

That one was pretty good. Haha

Not as weak as a BAC axle.

What are you trying to say?? That I don't have any BACbone?

Haha.Ok..I've had enough fun here. .BAC to work.

No disrespect. ..but I expect something more witty and lyrical from a self proclaimed rapper.

I'd hire a lawyer...because it looks like your BAC is against the wall.

According to several tech articles I've read a 130hp two stroke will "process" approximately 325cfm. That's less than half of what K&N says 2 of their 6" pods should flow. Just throwing data out there.....I give zero fukkaroo's what anyone runs for air filters. Btw..I can see benefits in running a larger filter especially in dirty conditions. .more filter area "should" extend service intervals.

Edit: More reading shows that those flow rates DO include the pleated material. .so you're looking at 366CFM per 6" pod as installed. Measured at 1.5" WC.

So I measured a 6"pod. By K&Ns math, it should flow a minimum of 366CFM ...that's EACH. And I didn't even allow for the pleats which will add significantly to the to total filtering surface area. So take that as you will.

I'd allow 3000.00 for a quality build..As long as you are going to stay in the 4mm range

Makes me want to switch to asphalt. Tired of dust and sand.

K&N states their filter media flows 6.03 CFM per sq inch. I guess someone should measure the surface area of the most commonly used pod sizes for a baseline. I don't know at how many inches of water column that measurement was taken btw.

That's a fair price if the chrome is new like he says and they are in good shape otherwise.

That's a good answer. If you had said yes, DDQ would have next asked you for nudes or at least top less pix.

Minky?

Hurry up and get done before the HQ ride!

Here's my take. 1. I'm all for new stuff. It's cool, fun, and something else to spend money on. 2. I'm NOT one of those guys that automatically buy in to some new product promising the world. ( clarification here> I'm not saying wiseco has promised anything..I'm highly doubt full of the OP's claim that these pistons will produce 7+hp over a properly built 795 engine.) I'm sorry but relocated piston pin and relocated windows aren't netting 7-10hp as was claimed. Will these pistons work out in the long run..probably. ..and I hope so, for the reasons windy mentioned. ..but will they net someone 7+ hp over a properly done 795..I'm betting no. Once again for the record. ..no hate here for the piston or their intended purpose. ..just skeptical of wild HP claims.

The only nay saying I see is rebuttal of the claims thst new windows will add 7+hp.

I use Windows 8 now. I'm debating trying something with mobile features. .but unsure yet.

Just looked. Simple start is only for up to 20 customers.

Thanks. I'll check it out.

Your superior riding skills should compensate.

I'm going to say by 2 can ams.