sprinklerman

arms sold to HP2000. Boxed, will ship tomorrow AM via USPS

If its what you are looking for, i have some used Fireball A-Arms in the F/S section. Hope this helps. 500.00 for both is a tight budget to work with,

Sorry for delay. A tree limb broke my cable line ,,,so no internet untill this morn. Will post more pix and reply to all PM's as soon as i get caught beck up. Thanks !

CDI is 40 shipped. Bike was running when it blew,but it has been parked on his porch for some time. If anyone knows how to test one id be happy to do it before shipping. IF<< i have time ,i can plug it into my wifes bike Thursday and check it that way.

Yes, i have carbs boots and a cable. You can have the stock cable with tors tops and a non-tors cable. But the carbs only have the tors tops. im taking more pictures today after work, i'll post some of the carbs and stuff along with it.

The bike was just sitting on a back porch for some while. Thats why there is so much dust and dirt on everything.

Yes, i have the whole brake system,just havent had time to get the pix of all the little bits and pcs. Also harness has not been cut. there are a few spots where the factory electrical tape is/has unraveled . but no cut or messed up wires that i can see.

All prices OBO, and plus shipping i just thru this together: Cyls measure 64,4 mm so lots of bores left. (need bored,but no damage)head good. (150) SOLD Complete trans (75) The wiring harness,square plug (45) SOLD OEM stator -square plug,but i dont know year. ( i will ohm stator tomorrow to confirm its good) (50)SOLD both flywheels are good. (50 each)SOLD UMI air box filter adapter (like Pro Design)(15) Thumb throttle good. (10)SOLD Brake lever and master cyl good,but need to be bled and purged (10)SOLD Rear brake cyl good,needs purged as well. (10)SOLD Headlights look good,but i cant check them. worst thing is they might need bulbs. (40)SOLD 1 carrier has BRAND NEW bearings and seals (40)SOLD 1 carrier is used (id spend the 20.00 and get a bearing and seal kit (20) 2 good swing arms(25 each) heel guards need paint,they include pegs,,but dont have plastic parts.(80) also have good seat pan (15) cdi-sold coil -sold aluminum grab bar (10) 1 clutch cover (10) 1 stator cover(10) front and rear shocks (white) (40 rear ,40 for both fronts)SOLD (Rear still available) good lower A Arms(50) Rear axle,with nuts (40) front hubs(30) rear hubs (30) also have all other misc pieces from stock bike. "> "> "> "> "> "> "> "> "> "> "> ">

Sounds great. I'll bring them with us if they havent sold by then.

Bump to the top. somebody make me an offer close to what im asking and they are yours. Making room and organizing shop,getting rid of extra parts. I'll also have : 2 Flywheels ,wiring harness,cdi,stator, stock wheels with 50% tread tires,pegs,heel guards,steering stem, Stock cyls and head,stock carbs Stock tranny, 2 Stock swinger and carriers, 1 frame 2 stock headlights Renthal bars thumb throttle and all controls And a bunch of other clean usable parts.

Yes . ASR has them in stock for 26.00 each. Direct bolt on,no spindle reaming. Fireball does too.

Get yourself a clymer manual ASAP.

Just found some arms for my bike. Lets move these things quick, i want these gone. I have too many parts just laying around. $225.00 . That will put you at around 275.00 for some Fireball A Arms with new upper joints IF you even choose to replace them. Thanks!

The two upper heims (or ball joints, you pick) are 26.00 each. So my math says 55.00-60.00. Not 100.00. All the other hardware is tight. Thanks for the bump.

I have a set of either ASR or Fireball brand A Arms for sale. I think they are Fireball by looking at the lower metal brace compared to ASR. They are +2- +1. They came with this bike when i bought it. I noticed that the two upper Heims are not LOOSE or sloppy,but DO move freely compared to the lower ones ,which are MUCH thicker material. I dont feel like investing money into them since i really want a more DRAG style A Arm anyway. These are more of an "MX" style arm. I can tell that the previous owner used some kind of textured paint or (PC??) on them . I haven't had any problems with them,just looking to upgrade and get it done before the BHQ ride in a few days. the extended tie rods hardware is included. Since they appear to be painted to me,and that id want to replace the upper heims, i'll cut a good deal on them. $225.00 +actual shipping (whichever carrier you choose prolly 20.00) BTW: The RPM 350.00 ones on Ebay are NOT +2 +1's. They are only +2's Thanks! "> "> "> ">

Probably have more success if you posted in the "wanted" section of the classifieds. Should be plenty for sale there.

Fixed!

I have some used american star A Arms i'll be selling after the BHQ ride in a couple weeks. Like these,but used > http://www.ebay.com/itm/Banshee-350-2-up-1-PRO-X-A-Arms-Lines-Ends-BLACK-By-American-Star-/280967106336?pt=Motors_ATV_Parts_Accessories&hash=item416af1cf20&vxp=mtr Going to less of a "MX" style A Arm to more of a light weight "Dune/Drag" style.

How do those tires work on the pavement? J/K. Looks nice man!

Sometimes Tim does send his specs to Noss and have Noss cut them. Then Noss will ship them to you. Tim charges around 125.00 to do this. Most of the Sponsors on this site will do the EXACT same thing for 75.00 (give or take). Up to you though. Why not call the person that did your domes you are having problems with and allow them to try to remedy the situation?

Needed replacement reeds,so i bought a set thursday for 206.00 shipped from Honda of Toledo. Called today and they should be here friday.

No problem man. I kinda figured that's what you wanted it for,but figured there's no harm in checking. And i agree with you on doing it thru a dealer,,dont want anything coming back on you later.

I have a Glock 22 ( .40 cal) in olive green and black with 2 10rd clips and a 15rd clip. It also has a Brand New Crimson Trace laser (grip activated). It has has 3 mags shot thru it. Has all paper work and original boxes.

I have a Glock 22 ( .40 cal) in olive green and black with 2 10rd clips and a 15rd clip. It also has a Brand New Crimson Trace laser (grip activated). It has has 3 mags shot thru it. Has all paper work and original boxes.

Id check Ebay for a good used one. It will make all the difference in the world. I bought mine used,got tired of DIY and sold it 2 yrs later for the same money i bought it for. It was a fun experience, did a few blasters and a few banshees for friends,then got out of the sport for about 10-12yr ,until just recently. Easier now just to send it to someone who does it for a living...for me anyway. Id rather do what i do,and let them do what they do. Success to ya!