blubyyou

Bought from infamous....thanks.

I need both the caliper and master cylinder for the rear. Needs to be ready to bolt on and go....if it was already blead it would be great. Must be in good working condition. Please pm me ASAP ...paypal ready.

Damn I should've typed faster .....

Is that an aftermarket shifter? If so how much shipped. Thanks.

Like i said JD has been slammed. I guess I will wait on JD for these.....as I'm sure they will be a very nice quality piece.

Bump

I was the one that started a thread on this a few months back. I sent JD my blingstar rotor guard and dual sprocket guard off of my ltr 450 for a template. He's been a little slammed so I realy haven't bothered him in reguards to this. He should have what he needs to design them. If he needs my blingstar stuff again I will gladly send it back to him. I realy want some of these for my banshee. I can't keep a skid plate on my quads no time until it is mangled lol.

Mods are in my signature...35 pwk air strykers main jets are142's and pilots are 45's. I ride at about 2200-2400 ft with temps around 70- 85. Bike smokes a little heavy and my plugs are kind dark...starting to narrow in on a dark brown....and they still seam kinda wet. Bottom end is a little sluggish but pulls great. I think I'm maybe a main or two too rich but I'm thinking my pilot is quite a bit rich. I'm thinking if I'd drop to a 38 or 40 it would help out with the wet plugs, heavy smoke, and laziness in the lower end? Am I correct in my thinking? I run 927 at 40:1....but I'm gonna try klotz techniplate to see if burns a little cleaner and less smoke. Thanks in advance. Can't wait to get it back running this weekend to check out my transmission I had Camatv do for me!

I personally have had great success with my kenda cutter xc's. Seem to hook pretty good out in the trails. Mostly dirt and rocks around hear.

Another pm sent to you quadpro

By the way....thanks BUILDER for the info on quadpro and the offer.

Quadpro I sent you a pm.

Looking for a titled frame 04-06. The paint don't matter as I am going to strip and powder coat it. As long the bolt holes are not all stripped out and its straight. Let me know what you have. Must be willing to ship unless your close to the WV/ VA area. I couldn't believe the price minkia38 on eBay was asking for his .....wow!

I spoke with JD about 2 months ago about the progress. He seemed to be quite covered up with other projects at the time. Maybe if some more people would call him up it may speed up things for us. I just don't like to bother people, not to mention he's a great sponsor and does awsome work, doing all the work by himself. I know how it is being slammed with work and covered up. I definitely haven't forgot about these....I do still want a set....I'm just patiently waiting.

I went to the parts store....cut my own gaskets and placed a light coat of 3bond on them. Sealed up great ...motor held 10th psi for 30 minutes so it should be good to go.

Never thought of that....I would assume napa or a part store should have it in stock?

I'm out of reed cage gaskets and I was trying to get my motor assembled. Local dealer don't know they're butt from a whole in the ground and i didn't want to wait 3 days to get them from FAST. I'd like to get it together so I can do a leak down test on it. Can I use 3bond without any worries or should I just wait for gaskets? Thanks.

Sent you money through paypal ....thank you !

Pm sent to you....

I need a stator cover....mine is cracked. Let me know what you have.

If you need the case repaired find a shop that TIG welds and they should be able to repair it for you. Then install a case saver to keep it from happening again.

I run a T.M. Design case saver. It's plastic and has some give if the chain were to break. It fits over the shaft the sprocket goes on and is quite beefy. Well work the money I think. I personally like it much better than the metal ones.

I also have an Ace swingarm. Very nice quality and seem to hold up to the abuse of xc style riding very well. I would definitely recommend there product and wouldn't hesitate to use them again. I have no experience with Stellar swingarms but I'm sure they're top notch quality pieces also.

Also the rotor is new....so I know its not that.

I have a parking brake block off on it...guess i should just buy a new caliper?