Phelps

not enough compression..... are you still running the head/domes for the big bore cylinders?

i need a set of rear skat trak's the will hook well on a 4mil cub. shoot me a pm with your best price shipped to 73401, or pickup arrangements if you are within 100-150 miles. thanks!

up! also have a stock rotor (straight) 25 shipped. stock swingarm (custom blue paint) rear carrier (same color) new bearings and seal. 70 shipped for both.

you mean the arm on top of the case? if the ball and shaft is welded then the shaft probably melted to the arm as well. the rod might have came out easy, but i am sure the arm has a burr on it and caused it to stick in the case. the last one i seen wasn't pretty. sent the arm through the outside of the case. i am still hunting parts as i type this out.

this better? lol

why not just sell it asis? no offense, but you don't have enough goodies on it to justify parting it out. where are you located?

2-2 1/2 turns out is a good starting point. turn the until the idle is close to peak and response is crisp.

got hot from low oil lvl probably.

car lots?

what kind of shot? 75?

i need the disengage arm that the cable hooks to, the push rod and the ball. parts must be (like new), or new if the price is right. thanks

someone make me some offers. i need to sell this stuff to get parts i need!!!!

UP!!!

i was told we could send them in and have them cut down. i also have a 13 1/2 and on the +10 it's way to long. suppose to be like 150, but don't quote me.

bump for price drop 175 shipped for the subframe 60 shipped for the swinger and carrier

rear shock sold grab bar sold.

clear your inbox out. probably around 20 shipped. got one in front of you and will let you know if he backs out.

asshole....... sending pm

no and i have a second one if this one shows up and your no happy with it.

sorry bottom end sold last night. do you have a set of front shaws fs?

lew swan (weld on) subframe new. 200 shipped stock swinger, with carrier (GM LAZERSTAR BLUE) new pivot bearings, new axle bearings and seals, chain adjusters and stock slider. 70 shipped weld on grab bar (needs tweeking to make it fit). cover the shipping and 10 bucks for my time. stock stator covers. 15 shipped each rear shock 30 shipped stock rear rotor. (not warped) 20 shipped modquad 20cc domes (no pitting) went cub domes. 30 shipped

yeah there is a oil catch on the clutch side that has on bolt in the top case and the other in the bottom case. behind the clutch basket.........

in your case i would just order kits/kit. they sell nice stator cover, clutch cover, intake bolts in a kit, or M&Matv can get you a entire kit for the bike.

90% of the bolts are m8 1.25 the key parts is the X? m8 x1.25 x?

lawsuit? does the items description mention it's not intended for use?