captainhowdie

PM returned.

I FINALLY decided to just go ahead and part it out, So everthing is back up for sale. I have adjusted prices for everything to sell fast. The bike is still complete so it may take a day or 2 to get the bike stripped and get pics. if you want a pic of something specific i can text or email them to you. My paypal is [email protected] All prices are plus shipping. 421 cub cylinder clean up port by FAST w/ pistons less than 25 passes on it. includes stud extenders and 21 cc cub domes $900 Hot rods 4 mill crank $300 almost new Vf3 reeds like new $160 39mm pwk's set up for alky, dumps are .123, ez springs, vito's power jets, chariot billet bowls includes steel braided cable $450 White knuckle racing billet intake for 39mm carbs $70 (will fit smaller carbs also) K&n filters w/ red outerwears for 39 carbs(will fit smaller carbs also) almost new$60 Shearer sb sf inframe pipes show chrome with polished silencers, cascade front hangers and clamps less than 10 passes on these! Just got them brand new from Matt shearer a month ago so they are from his "new" jig $500 1-5 n down extreme dunable less than 10 passes on this also everything is cyro treated shifts great $450 +6 chrome round carrier swingarm with carrier. Not sure of brand but its verry nice $360 Polished pingle $65 Stock stator with chariot performance adjustable timing plate $85 Noss machine coolhead no domes (polished) $150 MINT 2004 cases no chain whack or stripped holes $130 Chariot performance 3pc stator cover w/bearing support (polished) $260 Modquad billet case saver $20 Pro design billet impeller like new $45 Cascade pancake bearing $30 Billet locking axle nut (polished) $40 Stock Axle and hubs straight as an arrow $80 Stock 2004 a-arms paint not missing from the under side. including complete front brakes, spindles, hubs, rotors, tie rods $200 Asv pro clutch lever $40 Complete rear brake setup. master, lever, steel braided line and caliper $80 Pro design ez drain water pump cover $25 Polished rear grab bar $35 Stock 2004 front shocks (gray) $65 Stock 2004 rear shock still feels like new $70 Wire harness (uncut) include cdi and reg. $80 Pro design billet shifter just polished like new $40 2004 frame with clear MIchigan title in hand, factory red color includes steering stem $200 (local pickup only) Stock 2004 plastics race cut front and rears $160 Renthal tapered fat bars with adaptors and dvs pad $50 Modquad billet gas cap red with engraved flames $35 almost new inner clutch hub, pressure plate and FAST clutch kit less than 10 passes $100 I would take $4500 cash for the bike complete and i have 3 boxes of extra parts that go with it. This is the bike in my sig but the pic is not current, pics were taken before a bunch of polishing. If you want to call me with any questions feel free. 616-890-9702 my name is Jesse Uploaded with ImageShack.us

bump for a great price! I cant believe you still have it for that cheap.

Thanks to everyone who pm'd interested in parts, but i am working out a deal on the whole bike right now. If the deal falls through i will post everything back up.

I have been thinking about parting my 04 banshee to finance another toy. Im not 100% sure i want to do it yet because i dont want a bunch of parts left over that i cant do anything with. I have put alot of time and money into this thing in the last couple years (Jeff @ fast can vouch for this) Everything on this bike has less than 25 passes on it!!! I literally just built it 421 cub cylinder clean up port by FAST w/ pistons less than 25 passes on it. includes stud extenders and 21 cc cub domes $900 Hot rods 4 mill crank $350 Vf3 reeds like new $160 39mm pwk's set up for alky, dumps are .123, ez springs, vito's power jets, chariot billet bowls $450 White knuckle racing billet intake for 39mm carbs $70 (will fit smaller carbs also) K&n filters w/ red outerwears for 39 carbs(will fit smaller carbs also) almost new$65 Shearer sb sf inframe pipes show chrome with polished silencers, cascade front hangers and clamps less than 10 passes on these! Just got them brand new from Matt shearer a month ago so they are from his "new" jig $600 1-5 n down extreme dunable less than 10 passes on this also everything is cyro treated shifts great $450 +6 chrome round carrier swingarm with carrier. Not sure of brand but its verry nice $375 Polished pingle $65 Stock stator with chariot performance adjustable timing plate $85 Noss machine coolhead no domes (polished) $150 MINT 2004 cases no chain whack or stripped holes $130 Chariot performance 3pc stator cover w/bearing support (polished) $280 Modquad billet case saver $20 Pro design billet impeller like new $45 Cascade pancake bearing $30 Billet locking axle nut (polished) $40 Stock Axle and hubs straight as an arrow $80 Stock 2004 a-arms paint not missing from the under side. including complete front brakes, spindles, hubs, rotors, tie rods $225 Asv pro clutch lever $40 Complete rear brake setup. master, lever, steel braided line and caliper $80 Pro design ez drain water pump cover $25 Polished rear grab bar $35 Stock 2004 front shocks (gray) $65 Stock 2004 rear shock still feels like new $70 Wire harness (uncut) include cdi and reg. $80 Pro design billet shifter just polished like new $40 2004 frame with clear MIchigan title in hand, factory red color includes steering stem $200 (local pickup only) Stock 2004 plastics race cut front and rears $160 Renthal tapered fat bars with adaptors and dvs pad $50 Modquad billet gas cap red with engraved flames $35 almost new inner clutch hub, pressure plate and FAST clutch kit less than 10 passes $100 I would take $4500 cash for the bike complete and i have 3 boxes of extra parts that go with it. This is the bike in my sig but the pic is not current, pics were taken before a bunch of polishing. You are more than welcome to come check the bike out and if you have cash in hand you can test ride it. There is alot i have left out so if theres something your interested that isnt listed let me know. I will sell the whole bike for $4500 cash, whitch is about half of what i have into it. And i have over 6k in receipts from FAST in the last year alone. I am located in Dorr, Mi. If you want to call me with any questions feel free. 616-890-9702 my name is Jesse

Damn...i feel like a dumbass! I thought you were papa_smurf49319 from MI. I guess i should have looked a lil better.

Bump for a bad ass bike. Good luck with the sale man!

Def looks welded and epoxied. If you cant get it to stop leakin, get a new set of cases and bring it over with some beer and ill show you how to tear down and rebuild your bottom end

I have a chrome +6. pm me if interested.

Oh god! Camatv should chime in any second to tell you how to tighten that chain.

Im in! Where is everyone staying at? we will be at yogi somewhere near the playground.

Mine is in and has only been ridden once, but it shifted good and didnt gernade

You def. will need new pipes. I have a brand new set of shearer inframes for sale. Pm me if interested.

Im looking to get into a 1 ton deisel truck, I have about 20k to spend so i wont be buying new. Just want some opinions on the Dodge w/ the cummins, the Ford with the powerstroke and chevy duramax? This is my first deisel and i want to make sure i dont buy a pile of shit.

Thats some funny shit!

The family and I will be there for sure

I just wanted to give amatobanshee a shout out for hookin me up with some nice polish work! Anyone lookin for polishing or powdercoating should look him up! He does good work at a great price. Thanks Pete! Will try to post some pics of all the bling in the next few days.

Where are you located and what kind of cash do you want for it?

Sorry man, I sent it out to wcr and had them turn it into an extreme dunable.

Im down for June 19th.

If you part it...I would be interested in the lockup and cover!

X 2 Man... I sent my tranny to Wcr january 2nd. I just got it back YESTERDAY! I will never do business with them again unless its a warranty issue. I have been dicked around so much by Greg and the girl that answers the phone there. My trans was surposedly shipped 4 different times, they sent me back my tranny with a bad shift fork, then i get the new shift fork after WAITING 2 MONTHS! And then he tells me to send the tranny back to him again cuz it wasnt right. Im glad he is taking care of people eventually...but to everyone who is looking to do business with them, beware! I will be installing my extreme dunable in the next week or so and will report my findings.

I responded to the ad on CL, but never got an email back.

X3. Call Jeff. He will take care of you!

Is this a cub or vito's cylinder or what? I run 39pwk's on a 421 cub with inframe shearers.