quadgod211

i thought i seen 520 but i guess i was seeing stuff....id say its 530 then

nahh...trade only for a shee

no offense... i could do $50....i aint never paid that much for a chain i dont think...

got a 06 trx 450r looking to trade for a trail/race banshee on shocks trx 450r..... green wire mod for another 1000rpm 11:1 wiesco stage 3 hotcam full hmf pipe uni filter w/o lid g-force +4 axle +2 lonestar stem and anti vibe clamp chrome factory shocks re-worked for 160lb rider +2 a arms fully adj yellow lable doug gust series rims brand new rear tires look like a holeshot rebuilt in spring 2013 and rode on 5 or 6 trail rides all year...owner is wanting to start climbing and doesnt wanna sink a fortune in this 450 to compete

my bottoms look like those but my tops are solid were the long bolt goes through....i dont know for sure what mine is either....

i cant remember what they was called...it was like a sand snake or sidewinder or something ,,,they might have changed a lil thing but its the same pattern to start with as the old ones....

i started with drag ported stockers and went to a 358 65mm cub ported by passions...it was awesome on alky ...season went by i sold them to my buddy for $800 and went 421 that only picked me up 0.10 ...i was pissed ..wanted to sell out..so i tried one thing instead of buying all new and went to nitrous...well it brought the bike to life but wasn't worth the aggravation... Now i have the 4mill stock cyl and im looking to go bigger because i need more for hill climbing....i would trade my stock cyl setup for a set of cub cyl 421...if i was dragging i wouldn't waste my money or time and just convert what i got to alky and run it i dont know what mx guy has but if you aint got a 4mill crank already this is the way i would go...i googled stock stroke cub and found dyno.s before i bought mine back when cubs first came out

whats to know??? depends what your doing i guess...on alky dragged out the make around 100hp

Posted 06 May 2013 - 09:50 PM Maybe one of them cr 500s but heard are a bitch.. Idk I would like to try a 500 on a 450 frame

those are remakes...15 years ago there was a guy i raced with had a old 80 sum model kz750 with a banshee swingarm on it he ran those but they was named different...identical tread though...they was really stiff...they was basically the 4 snow of there time..everyone ran wedge 2's when they 1st came out and those was the only other option

i never tried 1000ft but in 660 i ran a 5.93 on a 421 cub on alky with sensually my 300ft drag setup...just added 22in american racers and went to a 17/38...i didnt have a 6th gear in that tranny it was a 1-5 override...had to install a fuel pump as well...i ran 6.10 -6-20 et and i tried taking everyother spring outta my clutch and it made 2 passes in the 5's i think around 120mph full rigid frame with wheelie bar...i think im lucky i didnt burn the bike down becuase i never went the much distance wide open

Yea...i forgot there endangered species better get em up...i had wedge 1's and sold em on my bike...never see them anymore either I 2 sets of 22-9 wedges that used for trail riding...i might wanna hang on to them maybe they will sky rocket in value in 2001 I bought a set from chaperal for $163 shipped on rims...lol

Cajun that black and white bike is sweet..id like to have that plastic...sharp man!!

No way a 4 snow compares to a wedge...maybe you all are comparing a 22-9 wedge to a 4 snow because a 22/9 wedge can't even compare to a 22-8 wedge...its not even close...ive never seen a set of 4snows go into the 4.00's I have seen 22-8 wedges in the 3.70's we have sone hard hooking dirt here and it finds the weak spots of tires...

red line aggressive dune /drag ported hp in the mid to high 80's 40ish tq is what Cam told me i use them for any type of ridding they dont get hot i run +5 timing +8 at the track on race fuel includes ported stock cylinders polished chrome... custom match 17cc race fuel domes 195 psi compression...a set of 19cc pump gas domes custom cut...and used pistons 65mm 40 over... $600 obo

when i bought mine i was told that these bolted on a bone stock shee with stock pipes would make 65hp

you still looking for a setup??

i ran my 358(65mm) cub with the same setup in my sig and turned a 4.24 et passion ported suppose to make 90+hp matt

is it dunable??

what hp did it make on gas??? i had a 358 on alky it was alright...

i got a set just like these ...i know they fit my 35mm but do they all fit up to 41??

yea i agree...if you need somthing in a hurry then 4 snows maybe....i always thought they was for 4 strokes mainly they do fold over if you put power to them...and there heavy i always thought.. i ran prowedge 1's and 2's and they gotta be on 8's or they wont wrinkle...if the tracks hooking good you can even hear them pop when they balloon out. keep your 4 snows for trail riding

what plug is on the 03...i got a oem but i dont know the year

aint gonna be able to trade the reeds i need to sell them...ill take $150 obo for the reeds and billet intakes they fit 35 mm but i dont know how far they stretch... matt

i def want a set but im strapped for cash right now till i go back to work and that could be 4 weeks from now....i need to find someone to trade or sell these if you know anyone that runs the 4 strokes they normally want ohtsu's mines on black pc wheels so i was gonna try to keep them ubkess i kind find someone who wants to trade wheels and tires for wheels and tires