Glamis321

the stock pilots are 25s, and stock mains (the big jet in the center) are 200s i believe

bump bump bump bump

Ok so i have an 01 shee with v force reeds, fmf ssts, and k&n filter. Recently replaced the fuel valve seat and needle in both carbs because one was leaking out the overflow tube. On my last trip the left cylinder stopped firing and i replaced the plugs and within five minutes it fouls out the left plug again. I believe that the left carb is dumping fuel into the cylinder. any ideas why? i was thinking the float was adjusted wrong but wouldnt it leak out the overflow before it started dripping into cylinders?? any help appreciated. thanks. jetting is 270 mains 27 pilots and stock needles on forth clip from the top, around sea level (a little rich). fuel is mixed 40:1. thanks again.

glamis elevation is around sea level.

Im heading out early saturday morning. Gunna be there till next saturday will be deep in the washes but ill look for you guys

I need your eyesore,please help Date: 2009-05-13, 2:04PM PDT I had a nice hedge on my property line, but my neighbor said it was a ratty eyesore and killed it. I would like a bus? a train car? huge peice of rusted heavy equiptment?? This is not a joke If you have something huge and ugly you need to be rid of perhaps we can help eachother out! I would prefer something tall and ominous but will consider any old peice of shit. Wreckage from a airplane would also fit the bill. Also, if part of it squeekes in the wind or is highly reflective in the sun that would be a plus * Location: kelso * it's NOT ok to contact this poster with services or other commercial interests PostingID: 1169369888

haha x2!!

yes, the +1 means its one inch forward. Basically just giving you a one inch longer wheel base from front to back so its a little more stable.

yea i didnt have a spark arrestor on my old atc 250r and they never bothered me about it...They WILL bother you if you dont have a helmet or a flag, or riding double. Even taking my little sister for a ride on an LT80 they stopped me and said no double riding... Theyve been cracking down on fireworks as well, so dont get caught

yea you should only need one if you plan on night riding...enjoy your first trip man. your gunna be addicted after this

damn. let me know if they come back on the market.

anything specific your looking for to trade?

i agree. Shogun should have won.

is there a performance difference between the older and newer ones? i heard the new ones were a thinner material too

saw these in for sale section, might be something worth looking at rocket pipes

x2

love that mountain dew can rezzie on the rear shock

they changed the design of the old green tags to these new green and blue tags, thats all. its a green sticker and not a red sticker. they gave me the blue green ones for all of my bikes this year.

most flux core wires run way too hot to do thin metal. its mostly used for structural steel thats 1/2" thick minimum. anything thinner than that you would be better using mig or tig, but weld inside out of the wind because those use shielding gasses to keep your welds from developing porosity and cracks. tig would be your best bet to weld pipes.

man i would jump on this if i had the money. good luck with the sale bro.

definately like the YFZs over the hondas. my dad and brother both ride them and with a aftermarket pipe and that "cam mod" it runs pretty hard.

not to make your decision more complicated but what about rockets? ive heard they are nice pipe too and have good mid to high power, similar to CPIs

i want some powerbands too. extra wide ones.

if you go to the "reliable atvs" page, my favorite part is the "enter content here" between the pictures

definitely get yourself a clymers manual. it will tell you pretty much everything you need to know about banshees