Jump to content

98_shee

Members
  • Posts

    1,080
  • Joined

  • Last visited

Everything posted by 98_shee

  1. I agree ^^^, he is straight forward and is not here to rip anyone off!!! Great guy to deal with!!
  2. Are you wanting just fat bars? I have a set of turners, and msr but they are 7/8. Let me know if your interested.
  3. I know im gonna catch hell for this but i like the trinity's, they are alot easier to adjust. But are pretty expencive. Trinty
  4. Pics??
  5. What were you interested in? What size boots/color?
  6. yep most of my life.
  7. Welcome, Im also from NW AR.
  8. Open to trades?
  9. 1) What type of aftermarket exhaust do you have? Trinity Stage IV 2) What type of airfilter do you have? 8in k&n Pods w/ outerwears 3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all. No Box 4) What is your elevation? 1,200asl 5) What size pilot jets are you using? 50 6) What size main jets are you using? 158 7) Air screw? 1.5 turns out 8) needles? CEL Middle clip 9) What temperature is your Banshee jetted for? 70-100 10) Do you have a port job? dune port 11) What kind of carbs? Kehin PJ's 12) What size carbs? 34PJ's 13) Crank? 4mill 5mill longrods 14) Head/domes? Pro design 18cc cut for long rod 15) Reeds? V2 16) Pistons/bore? 795 series 64.50 17) Premix ratio/oil/fuel? 40:1, Castor 927,110 octain 18) Timing? +6
  10. Did you use any grease to install the orings to hold them in place? One of them could have slipped out of the groove and got pinched, did you install all the orings around the studs?
  11. You shouldn't have to remove the air box, just pull the carbs off and remove the boots and reeds and install the new ones.
  12. lol, nah i have a pro design and trinity head, I had 3 or 4 stock heads and gave them all away, i just have one that came on a shee i just bought and don't need it.
  13. Your running a warped head??? I have a stock one if you need it.
  14. When i bought my shee it didn't have one on it, anytime i rode a wheelie it would leak and i was constantly adding fluid so i bought one of egay and problem solved, I recomend leaving them on. Just my opinion.
  15. TTT Make offers, and open to trades.
  16. I don't think anyone wants to help you lol, You will have to jet it with a pipe and filter, I have no idea what the jetting should be i don't know what stock is or much about the ex's, The pipe kit should come with jets if your buying a new kit, also some pipe kits require you to change the needle in the carb. The best thing to do would be to call the company that makes the pipe tell them your mods and ask them if they can help get you close on your jetting.
  17. If your wanting to keep it, you can zip tie it to the plastic in the stock location, or you can tuck it in the frame behind the bumper under the front plastic.
  18. What color are they? Can you post some pics?
  19. You may want to pull the choke's out and make sure where it adjusts the idle curcuit is working properly, once you take them out you will see how they work, and see what im talking about.
  20. The last one i bought was the moose, it was the complete seal kit it had every seal for the bottom end. It was around 15 bucks, but i have a buddy that works at the cycle shop and he gives me pretty good deals. I haven't had any problems out of them.
  21. Found a few more things i need to get rid of. A complete set of itp sand stars ($350) on itp wheel, these have maybe 2 or 3 trips on them they are still in great shape. Also a set of 7pdl extremes on douglas's (175) .
  22. Sorry about all these posts but it wont let me edit my post's Here's some pics of the pipe's and swingarm sorry there a little dark. 250 shipped on the pipes and 175 shipped on the swingarm.
  23. I Have this stuff just sitting in my garage and don't need it. all prices are obo and do not include shipping. I also have a set of pro curcuit pipes, and a +2 stock style swinger if anyone is interested i'll get some pics posted. Handle bars 35 each on set is msr dominator's, the others are turners 6061-t6 nerf bars 50 one of the u botls that bolt around the frame is missing but you shuould be abe to pic one up at about any hardware store for a couple bucks. I have all the other hardware for them. I also have alot of stock parts laying around, front hubs w/ new bearings, right spindal, tie rods, brake and sprocket hubs, a couple of front shocks (Different colors), swingarm and carrier, stator cover, key holders, stock head lights and tail lights. If you need anything let me know. Im sure i have more stuff so if you need something not listed just ask i may have it. I also have some car audio stuff amps and subs. Im open to trade just let me know what you have.
  24. I Have this stuff just sitting in my garage and don't need it. all prices are obo and do not include shipping. Handle bars 35 each on set is msr dominator's, the others are turners 6061-t6 nerf bars 50 one of the u botls that bolt around the frame is missing but you shuould be abe to pic one up at about any hardware store for a couple bucks. I have all the other hardware for them. I also have alot of stock parts laying around, front hubs w/ new bearings, right spindal, tie rods, brake and sprocket hubs, a couple of front shocks (Different colors), swingarm and carrier, stator cover, key holders, If you need anything let me know. Im sure i have more stuff so if you need something not listed just ask i may have it. I also have some car audio stuff amps and subs. Im open to trade just let me know what you have.
×
×
  • Create New...