98_shee

Here's a pic on mine its an R.I.S. they also make a 3 bar. I just bought another one just like this one for my other shee.

I have a billet led taillight, parking brake block off, trinity head. pm me if you need any of this stuff.

I have a trinity head with all hardware orings look to be in good shape but they are used, I would buy a new set before running just to be safe but its up to you if you want to run them. It comes with 3 sets of domes, one set was custom cut by lrd to a 19cc, the others are 18cc, and 15cc, one of the 15cc has a small nick in it but wont hurt anything. All hardware is included along with a new gasket shown in pix. I bought this off the hq a while ago and never used it, its just been sitting since i got it. I need a set of 35 or 36pwk's, open to offers let me know what you have.

I have a set of itp sand stars front and rear i may be willing to trade tires only for the white set.

Are the domes cut for a 4mill long rod by chance?

I have a good buddy that works the parts counter at our local stealer shop and he was getting stuff through trinity at pretty good prices. But he said something a few weeks ago about him not selling enough so they cut the low prices off. Im gonna give him a call later and see if he can still get deals from them.

Hey JD i have 3 sets 15cc 18cc and a custom set cut by lrd that are 19cc.'s. If i can't get them cut for a reasonable price for my 4mill long rod im going to try and get some that are already cut through trinity. If you cant find any in the size your looking for and are interested in any of these let me know.

Here's a roundhousing >Swinger< . This guy has an extra carrier for $60 or $70 >carrier< You will like the roundhousing alot better than the stockers.

I have one i'll trade you. If you want pix let me know.

What will you sell them for? Im very interested if your willing to sell them. are the pedals good are they in good usable shape? You can pick up a set of jarms off ebay pretty cheap.

If your still looking for a set pm me. I have a set of 34's.

I need two set of carbs I need a set of 33-36 pwk's. I also need a set of 28-30pwk's. Let me know what you have with pics and prices. I need these set up for gas. Thanks.

Pm'd

If the deal falls through with lowbuck pm me.

Pm me if you still have these.

Bump for a great seller. Got the parts very fast!!!!! Dont hasitate to do business whe Rebal!!

Nylon. Billet can crack your cases.

I have a blue rad cover. Pm me if you still need one.

If you would rather go back to a stock crank i have one. Pm me if you need it.

Are the cylinders ported for a 4mill? If not i would just leave the spacer plate. Or have a builder look at the cylinders and see if they can be reported for the 4mill. If you want buy a set of dome's already cut i have a set of 18's for a pro design i may sell when i get the other set in. I need some uncut domes for my new build.

Bump for a good guy. Ive bought parts off him with no problems!!!!!

Thanks. Im not sure which reeds your talking about. Yes the reeds will work for different carbs you will need different intakes for the carbs though.

I had a set of 38's on my 4mill and didn't like them, I could never get it to run rite. I put the 34's on it and it runs great. Reeds will make a big difference depending on what you get. I think for just duning and trail riding i would go with the 34's.

What kind of parts are you looking for? Why are you getting rid of these parts?

Sounds like a rod bearing went out, it would be better to just replace the crank, after you buy the parts ship it to have it fixed and trued back up your gonna be out almost as much as a new crank. If you want a used one pm me i have one. The wrist pin the the pin that goes through the piston.