Frogger

I'm not sure what the sand conditions are where you'll be riding but usually an 8 paddle hauler would be plenty. IMO best all-round.

Ron Woods!!!

PM Sent.

IMO there is no such thing as a "best" pipe. There are better pipes for riding styles. You'll want to pick out a set of pipes that matches the type of riding you do.

Just post some picts on the thread. I'm sure anyone interested will want to see pics.

^^^^^^^ Do a 4 mil with an aggressive trail port.

Hit up slobanshee06. He's got some in his shop that a guy might be getting rid of.

Personally I would stay with 8 paddle haulers. 10's will get you out of the hole quicker but rob you of some top end. JMHO

Looking for a nice set of skat track haulers on rims for a yamaha, 21x11x8's or 20x10x8 8 paddle. Need to be in really good shape. Pm me a price.

That's more like what I wanted to hear. I'm like dajogejr, want to see for myself if I can tell a difference and see if it better fits my set up.

Yeah I know there are some things that need to be factored in when deciding whether to have it lightened. I was just seeing if someones gone back to stock after having theirs lightened. Personally I've got a dune port and weigh about 165lbs. I do some racing but felt like trying a stock fly wheel again to see what the bike likes.

Just like it says, anyone prefer a stock flywheel over a lightened one?

I have some friends that ride some ski resorts once their closed for the season. That's all packed so I'm sure it's different.

When you say that the only thing that's been done is jets, do you mean that bigger jets were added? It just sounds like the jetting is off/rich. You'll want to check your plugs and see if they look rich. If so start by dropping the main jet down a size.

What kind of Boyesen reeds?

Before jumping to bigger carbs or port work, throw a couple more bolt on mods. Cool Head, timing plate etc.

You might want to give us more details about your current mods. I would consider porting and then carbs.

Shit for brains!!!

I just need these gone. I got off a guy that just had them sitting in his garage. $360 Shipped!

I just had port work and a lot more done at Wild Card Racing. Brandon Avery did an amazing job with my motor. He was very helpful and felt like he really went the extra mile. Following mods were done: Dune port with port matched case. Ported Reed Cages Trued and Welded Crank Lighten Flywheel Pan Cake Bearing All New Gaskests/Pistons Stiffer Clutch Springs Shift Star Mod Painted my jugs The bike has a great mid and top end pull. Couldn't be happier with the way the bike turned out. I would recommend his work to anyone. Shoot slobanshee06 a pm and he'll hit you back. Or call him at 435-660-1979

I like the '04 with the red frame. And the '06 w/white or yellow plastics.

Have I introduced one of my girlfriends?

I think I'm going to sit this one out! NOT!!!

Rich = to much gas Lean = not enough To lean and you'll burn down your engine real quick.

Best wishes on a speed recovery!