monster_energy06

was that kfx stock?? cuz i find them pretty fuckin slow buddy's bone stock 07 shee smoke the kfx 450 like no tomorowstock for stock like they said pipes pods timming saved head well jetted and mixed right

just buy one. there like 12$ you'll probably spend more money makin one....... heres the p/n:29L-14465-00-00

i got my pilots at my yamy dealer without a hitch. dont remeber how he didnt but he changed something in the part# to find the one i needed

how old are yur sparkplug caps?? ive seen this happen to a mountain max a few times wouldnt star by recoil but started right up by e start, and turned out to be bad sparkplug caps.. dealler told us its common on any yamy bike sled or quad...

one of my buddies had some in a furmula 500 made a hell of a difference to my surprise. although we did haave to jet it leaner for some reason try it out and jet it correctly

get some maxxis bighorns good trail tire awsome ride. i say go 26 imo

good guy to deal with. got a cool head off him, got it fast and it was in good shape A+++

perfect tx

thats exacly what i wanted to know, if the cylinder were designed for studs only .. i might try it tho. all my sled jugs are aluminium and i take the head off alot ya i though about that alot. witch is why i wanted bolts to seal the top also have stat-o seal washers to put on witch will seal it even better will see what happens, and i might try it

its not a mather buying new studs. the ones i have are fine. i alway found it easier not having studs in the way, while installing a head, or in my case making sure my o-rings will seat propurly on my cool haed tx for yur input ,its well noted, i have never striped a head bolt in any of my cylinder ever.... it shouldnt either. at only around 20flb of tork imo . yes the bolts i have, are for engine purpose there around 3-4$ a bolt.. like i said above i find the stud to be in the way tx for all the help

for a while ive been thinking of replacing my cylinder head studs with bolts instaid. i have a bunch of cylinder head bolts off my parted out sled engines that would work perfect.. has this been done befor?? would it cause any problems. reason im askin is beauce, im instaling my cool head soon, and would like to do this while im there if its posible. tx

either gun metal, or powder coat chrome, seen the chrome powder coat and looks really nice, but never scene it on a banshee frame my.02

i just got my cool head today and it anodized blue. the finish looks a bit dull. whats the best way and or product to clean it up, and make it shine like new again??

x2 happend to me also. that, and my float bowls were mixed up also

tx for the tip bud, and would u rather have me spell everything in french???lol. cuz it would a hell of alot easier for me lol...anyways tx again ill try that

man for a 1000$ what was werong with it ??? the first time

i did the switch to my sled to the eya's and will never go back to es same for my shee less plug fouling

i run br8 eya almsot the same as br8 es but wont foul as much at low speeds

tx the response. ya i did notice it was worst with that caps being to tight that's fucked imo.... it idles fine .. but i still fine that my idle screws are to short???? .. everything was fine until i played with the cable slack on the tops.. is there supaused to have that much slak in those cables?? anyways first thing il doo is take a 1" drill bit machine down that ilde screw piece about 1/8" smooth it back level and re tap if needed.. but still have my dought on the cable

i made a custom braket in the front of my frame for it. pretty easy to do

yes noss domes fit pro design and vise versa,, wwere are u having drouble sealing yru head??

i have some gncc 20x10x9 and love them. they are really good in sand compared to what ive tried... pop the clutch in 2nd in pure beach sand the front end come up no problem. there even beter in loose dirt and gravel and whatever u dish out to them. ide buy an other set for sure but might be the 21x11x9 this time but i still have a full season left on those tires still

ey we dont fuck around , tabarnak lol

same here i got fucked over by him also for 128$ on a noss head, scammer all i can sau is i hope to death he comes online

well i bought some parts off 99fastshee and they never got here. i contacted him and he gave me back my money with no problem even tho he shipped em out great guy imo very glad of this turnout. he stands by hes word