kirk3000

thats wierd.... how many kirks with shee's in the wack are there? ive only seen 2 shees around here, and they were in a guys pickup at the bar. and thanks for the site.

no... should i be?

i run it, and when i tore down my engine, it looked like it did when it was put together.

thanks for the advice, i really apreciate it

im in the middle of rebuilding my top end for the first time and i have a few questions about some things, Ive been reading up on everything i can to help the build go smoothly. but as Ive been reading i have come across a few horror stories that are making me more nervous than i really want to be. what is the piston ring end gap supposed to be? which direction do i point the ring gap? should i mix my gas with a little more oil for the break-in period? 20:1 or so? i usually run 40:1. i have heard about lubricating everything as it goes together, but im too too clear on that one, what do i need to do about that? during the break in would i let the shee idle for about 5 minutes, then let it cool and check all bolts and retorque everything. and do that a few times (2-3) then i would ride around nice and easy for a tank, at no more than half throttle. would that break in be good and safe? if anyone else has any other ideas and pointers i would really appreciate it.

yeah that could be it. people have been doing a lot of weird builds on this site haha.

wasn't it something like "taking the ugly out of a banshee"?

i think he did get it running, and he was always posting new pics of it on that thread.

i remember that, that guy took quite the "constructive" criticism.

yeah, i'll replace the bulbs and see how that goes

yeah they're stock light, but they wouldnt be burnt out because they both work, just not at the same time. its one or the other. yeah its good too see someone from around here.

i have the 22 inch all traks on 9 inch rims and they work pretty good, they work amazing in the mud and snow but in cali thats not too big of an issue, i like them but you gotta run them at a pretty low psi (3 to 4) but personally if i got another set id get them a bit smaller as they are kinda on the heavy side. but they really are good in any terrain.

when i have the lights on high, only the left one is on. when i have the lights on low only the right one is on. can you guys help me narrow down what the problem is? its not a big problem but its just annoying lol. thanks

why would they call it the banshee if it had next to no similarities to the actual shee? and a four stoke! i find that quite insulting for the name.

how about the 2 piece ones with the teeth :cool: