bansheeman1988

$100 shipped?

Yeah you can buy a kick start rebuild kit on modquad.com website, cascade innovations or RMATV and every once in a blue moon i see one on ebay Here's the link to modquad http://modquad.com/store/detail.asp?PRODUCT_ID=KS-REPAIR heres RMATV http://www.rockymountainatv.com/productDet...9#vehicleSelect and cascade http://www.cascadeinnovations.net/ I think the one from cascade is the cheapest. Good luck with your tranny!!

haha i hear ya on the pockets thing, mine have holes in them right now, damn big ones lol

I finally snapped some pics of my Jetta and now will post them for you guys to see and give me some feedback! Here is a list of the money i've put into her: Cat 2 Micron Fuel Filter System Electronic Fuel pump K&N Air Filter Recently cleaned the intake, turbo hoses and intercooler. (they were full of soot and oil) BSA 364 Chrome wheels on Kumho Escta AST tires Genuine Hella HID headlights with bi-xenon projectors LED Fog lights LED Tail Lights LED Side Marker Lights LED Bumper Corners with aftermarket clear lenses LED License Plate Lights I personally installed 4 white LEDs under each rear view mirror so you can see the ground when you walk up to your car Low profile shark fin antenna Whistler 1763 Radar Detector with compass Garmin Nuvi 350 GPS Navigation system Delphi Skyfi 3 XM Radio Reciever Alpine CDA-9885 In-dash CD Player w/ iPod fullspeed control (iPod located in glovebox) Boston S65 Speakers in each door 2 Boston G2 12" Subs mounted in a sealed box Tsunami 2 Farad Capacitor w/ voltage and amperage display Tsunami Distrubution Block w/ voltage and amperage display Alpine MRP-F250 4-channel amplifier Alpine MRP-M650 Mono amplifier Future mods: I have a badgeless grill for it, I just need to paint it and put the hood filler notch in and then paint that. new rear bumper Monster Mats New paint would be nice $$$ But here are the pics finally!!

Im looking for a good Noss cool head and 20cc domes. It can be used or almost new to me doesnt matter. Pm me with your details.

Okay, so i just run her till she blows the top end and then get a port job and throw a set of bigger carbs on and she'll haul some ass then??

Thats pretty cool to hear. That they acutually make a kit, i bet they cost and arm and a leg haha. I wanna see one with some pics of the kit.

I was wondering if you could use a pair of carbs from like an older snowmobile and get some boots to hook up to your banshee and use them instead of buying new ones?? My buddy i think has a pair laying around and i know they are pretty big thinkin maybe 36-38mm maybe if i could bolt up a pair of those, man my shee would really haul some ass then!!!

I was wondering if anyone has thought of this yet?? since so many people have jetting and carb issues. Is there anyone out there that sells kits, i would love to see a review or a shee equipped with it. Would solve a lot of problems and would haul some ass!!

Banshee stock carb boots (28mm) with allen bolts and carb clamps included - $15 shipped Pm me with info, thanks!

Allright ill keep it low next time, when i strapped it down that time i compressed the suspension so it was pretty tight and didnt move much, but ill take your advice. It would be a sin to lose my shee off the back going down the highway

The finished product, i know its nothing too special, but im getting more and more mods now as you can see in my sig haha these pics were taken about a month and a half ago so shes gotten more sexy!! lol Ill try and take some more pics soon!! Let me know what you guys think. Her first ride with my buddy and his dad (the other two banshee's) The white one is pure stock and the black and white one has a barnett complete clutch kit and bored .20 over shes pretty quick off the line. And here's mine in the back haha o well

She's finally going back together!!! yay!

And she holds!! Now its onto stripping her down and repainting the frame.

Picture of the case, look what those pieces of piston did to her :angry4: My nigger rigged leakdown tester, lol!

Here I finally got all my pictures uploaded to photobucket and now i can post them for all you guys to see my rebuild!! Heres some pics of the crank, the guy who had it before me was a complete idiot and didnt jet it for the PC pipes. And look what happened! Look a little elongated??? lol The nice hole in the right piston, this kid was completely not mechanically inclined!!

You are looking at a New water temperature gauge kit for liquid cooled ATV's or dirt bikes! The guage can be mounted anywhere, on the handlebars, inside corner of the front fender or wherever you specify! The gauge is an electrical temp gauge with sender shown in the pictures below, the barbed fittings are 3/4 inch so could be mounted on anything that is liquid cooled and has 12 volts DC. The kit includes: - 1-1/2 inch water temperature gauge backlit green, blue, or red - Wire harness (not shown in picture) - Heat shrink terminals for maximum water protection - Temperature sender unit assembly 3/4 inch inlet 3/4 outlet - Detailed instructions on how to wire the banshee for this gauge If you have any questions feel free to contact me. This is an example of what it will look like if you put it in this location, this is on my 2000 Banshee. Sending unit in the spliced into the return line from the cylinder head Picture of what comes in the box. Price of total kit is $40.00 shipped anywhere in the US, International shipping is available just contact me with your location. I prefer Paypal for payments, just send me a pm with your address, payment of 40.00 to [email protected] and your Temp Gauge will be on its way!

pmed you about the adapter and outerwear

Are the domes still for sale, willing to pay 40 shipped!!!!!!!!!

What main jet should i start out with when i am running a k&n air filter in the stock airbox, V force reeds, and pro circuit pipes. I am running 280 mains, 25 pilots and 2 turns out on air screws at this moment with just the pipes as mods. I havent put the reeds or new air filter on yet. I am also thinking of modifing the stock airbox lid with an outerwear on the top of the lid. Would this be a good idea, ive seen it done on ebay. Just would like to know where to start on jetting, thanks!!

i call dibs on that pro design air filter adapter plate !!

I need a set of aluminum rims for my pure sport realtor tires either 9x9 or 10x9 either is fine!