flyRTby

Damn that's clean! I wouldn't mind one bit if my bike looked like yours. The before and after is night and day!

ding, ding, ding.. PM sent

Obviously STOCK banshee suspensions are JUNK! I'm trying to approach this the most cost/quality way possible. Currently my suspension is 100% stock. Most of my riding this season was at the dunes, although i do still hit the trails. I'm really not one to jump my shee either. I'm either free riding or straight lining! So I'm looking for a nice useable well rounded suspension that i could take to the trails/dunes/drag. My plan is to +4 my swing arm and more than likely +2 +2 my axle(I'm having a hell of a time keeping the front end down w/the stock swinger). But, as far as the rear shocks goes... Is it worth it to send it to socal have him re-spring/valve/gas/seal the rear shock? Or am i better of buying a new rear shock? If buying new is my better option, I'm open to your suggestions. Extend the front a-arms to a standard travel +2. OR do i simply just replace the front shocks and leave the a-arms stock. I found these two kits on ebay. and was wondering what you guys thought about them? Another thought was, am i better off spending the money on shocks only and holding off on the a-arms? (keeping in mind eventually i plan to go +2?) Front Elka Dual Rate Stage 1 w/LSR +2 a arms. 899.95 Elka Piggyback Stage 2 w/LSR +2 a-arms Thanks in advance!

Thanks! Kennedy Power sports in Rochester Michigan

i like them cause they dont rob performance. a friend of mine had the hush kit and that thing was garbage imo. and its more expensive. sure it'll keep the db down. but as of this year silver lake isnt running db test. fingers crossed they will keep it that way!! Thanks for all the compliments

HAHA! So you know Angus, Zilla? I hear a lot of good and bad about him.. truthfully, its mostly bad. But i gotta say, hes a good guy. He built my engine over 2 years ago and did a damn fine job for a great price. Its still running like champ, with great compression! I can't complain Mods: Toomey T6's (i know i know, i should have T5's, Or something else, I bought my pipes before i decided to do the motor work) So if anyone wants to trade some T5's for T6's PM me! Cool head with custom cut domes (cut @ 60% bore diameter) VF3 reeds (installed after the Dyno run) Pod filters. Dune port @ 194 128 by Kennedy Performance Adjustable timing plate F.A.S.T Clutch w/pancake Billet water pump. adds at least 20HP! Stock carbs My stock carbs and T6's are really holding the bike back. I know i could easily jump 5-10 hp by switching my pipes and carbs. But I really dont mind cause it keeps me from having clutch issues. Next on my list is a +4 swinger!

Toomey makes them and have the best price. I found them on RMATV but for MUCH, MUCH more

I'm posting here cause i failed miserably trying to post them in the gallery

http://detroit.craigslist.org/mcb/cto/2145260941.html

x2 you really should make sure the bike is set up for race fuel.. 180 cranking compression isn't enough info to justify needing race fuel. you need the correct compression ratio to run the stuff. you cant always trust the engine builders out there.. trust me, i learned the hard way. i didn't blow my bike up or anything or french-fry the rings.. but she runs GREAT on pump gas with adjusted timing.. but then again the guy that built the engine didn't even sync the carbs... if you find out you must run it. then stick with the turbo blue or aviation fuel.. forget all that additive shit. i also found race fuel seems to have a shorter shelf life than pump gas.. had my jets clog up on me a couple times probably from the dye they put in turbo blue.. who knows?? and steer clear of the oxygenated race fuel such as VP that's a whole different story and again more than likely NOT needed..

i have a complete set. plastic heel guards, steel STOCK nerf bars(that obviously connect to the plastic heel's, and stock food pegs. if you only want the plastics ill sell them for $70 you handle the shipping

You know what to do. Looking for a pair of Stock headlights, no covers needed.. pm me or e-mail me for a quicker response with total price shipped or local pickup. I live in michigan and the zip code is 48094 supple_parrot@hotmail.com -Thanks

Stock stroke, with dune port, pipes, timing plate etc.

what kinda dyno were you on?? I have 60HP @ 75mph..

Sorry boys, i had to do it. The dog, the yummy and the girl playing spread eagle .

dude, ive always wanted to rip my banshee at k2k's track.. they'll let you? I have a buddy that works at the one on vandyke and 18 ish. Maybe he could set us up?

bump.. anyone?

My bike came stock with a set of sand devil 8 paddles i wanna say 20x11x8(im not 100% positive, because i'm posting this at work right now). Heres a link to my bike and my mods. I'm making some decent power and im curious if my 20x8 paddles will hold up for the whoopin im about to put on my buddies. I've been considering getting set of 9 paddles(the second set down from the top),here. Just looking for suggestions all will help.. thanks boys

My bike came stock with a set of sand devil 8 paddles i wanna say 20x11x8(im not 100% positive, because i'm posting this at work right now). Heres a link to my bike and my mods. I'm making some decent power and im curious if my 20x8 paddles will hold up for the whoopin im about to put on my buddies. I've been considering getting set of 9 paddles(the second set down from the top),here. Just looking for suggestions all will help.. thanks boys

ive been wanting to hit the ice all winter. pm me if you guys ever get something going

i have to be honest.. i scrolled past the first few pictures expecting to see your frame done up in rhino lining. someone else said it right. it has a cold beer bottle look to it at first/from a distance. it is... different. i would like to see some frames done in rhino. but as far as rhino liner goes - its junk. they guarantee the stuff wont crack or split for life - unless bent. so what happens when you rhino line your truck bed, get in a accident and bend your truck bed-causing it to crack? or what happens when you roll your banshee and bend the shit out of your plastics? do you really think that shits gonna hold up? or are you already preparing to strip that shit off and re do it? not trying to hate on you but i am tryin to hate on the rhino. rhino liner for what its intended for is straight up CRAAAAAPPPP.

I want one. That looks sick buddy