xXBlessedWithDeathXx

i had that problem today. i have a 2 in 1 carb and after all was said and done it was sucking air after the carb and before the cylinders. i pushed the carb in to much and what i thought was a tight fit with the hose clamp wasn`t. on the carb where it meets the boot is a notch that fits into the boot thats notched. it was pushed in to far causing it to suck air. maybe this happened to you or you didnt tighten them clamps.

Well done :beer:

Thanks man. if you have items for sale let me know.

Wait a minute I just figured out how to get 50.2hp out of my cheetah.....I pulled a plug wire!!!!!!!!!!! thats a good one. lol.

Do you have pics?

350 mains is really big. a friend has ported cylinders, 80 over, vitos high compression pistons, cool head w/19 cc domes, V-force 3 reeds, CPI in frame and his are 320. i was working on a shee and it has 200 mains and it was on the rich side. all that had was fmf pipes. i would let it warm up and take it for a short burn and look at the plugs. if your top end bogs i would say go bigger on the mains but make sure its warmed up. it can bog if its cold. if you have questions about your shee PM me. after i post 5 or so more times i`ll lose your link. what part of PA are you from?

thats what i was thinking. as far as i know it wont stick.

Ebay.

so your close to me. i`m at 1300 feet in P.A. ok i would turn your air screw out 2 turns to 1 3/4. boost bottle lol, you can keep it on your shee and as it vibrates it will slowly crack your intake and cause an air leak, as in return will make the shee run lean on one side causing it to burn up your piston and possibly scarring the cylinder, then you start over with a new bore . boost bottle makes a good ash tray if you cut the top off :biggrin: sell it dude. i would keep the mains and do a plug check to see what it looks like. better safe then sorry. to turn out makes it lean to turn in is rich. only turn one 8th at a time and make sure the bike is warmed up when you do it. dont forget plug check. i use B8ES NGK good plugs.

I have a 35mm pwk on unported cylinders and its perfect.

Thanks Snopczynski

thanks. :beer:

I spoke with trinity and they say they are reliable but i`m looking to see if someone knows first hand not just a company talking. this is a lot of money for a setup i dont want to be burnt in the long run. nate McCOy? what are the chances you have a #number? i dont know who that is.

I`m looking for some on hands info on the 421 and 485 cheetah kits. are they reliable? i`m looking into it threw trinity. they sound like they know whats up but i dont know. any help will be greatly apreaciated.

i would buy new except for whats called bling. i shop ebay for bling lol. I shop and look at these places. Cascade Awesome prices for Maier plastics. ZMperformancs Most on BHQ will say go to FAST F.A.S.T Verde power sports for graphics and seat covers but cascade has killer seat covers. Verde You wrote: does everyone on this site really spend that much money on thier bikes or do they buy some used stuff or do they buy already upgraded bikes. I have a 87 shee. its in the pic below. thats about 13 hundred later / tires / tranny / crank /banshee parts bike / bore piston rings / exc. it dont look that bad now i just like the cop car in the pic lol. it needed a lot to run but speaking for myself i`m spending a grand this week coming up and i want more. my winter project will consist of about 2G and i probably wont be happy. Shees my drug. if i purchased a running shee with mods i would find a way to spend $$$$ on her.

I can`t get pics of the area today. its nothing but rain today. i`ll try friday.

treverton is a town that coal hill is located so its kinda the same place. shamokin is a town out side of treverton the opposite side of coal hill. the area is sweet. i`ll be going out sat so i`ll post pics of the area (Shamokin) maybe even in the AM i`ll go for a burn to get pics. look in the pic forum in about 24 hours.

lol thats funny.

Shamokin P.A. about 1 1/2 2 hour drive from you. 45min from (harrys you pull it) in Hazelton. all the trails and hills you could ever want and its free. its a drive but well worth it if your camping.

I made a trade to hyperlite33 and his items are as described. I would do business with again. thanks bro.

Up.

I sent his a message you should be hearing from him soon. i asked him to join BHQ so maybe he will idk. thanks

His e-mail is in the post and i`m sure he will be very interested. tell me what your mods are and PM more pics i`ll see what i can do.

yea, its a very nice ride. if any one is interested send pic of the shee when you email him.