Jump to content

_Hex*

Members
 View Profile  See their activity

  • Posts

    326

  • Joined

  • Last visited

 Content Type 

Everything posted by _Hex*

  1. _Hex*
    pm sent
  2. _Hex*
    Regina GPXV is what all the drag racers run on 520 chains, either that or DRZ2's on 530's
  3. _Hex*
    just as the title says ballbearing lock comes complete ready to go $205 OTD i also have street bike clutch and heavy duty springs or complete toomey clutches just let me know faster response Hexstylee3@hotmail.com
  4. _Hex*
    bump
  5. _Hex*
    Email me at hexstylee3@hotmail.com I have some available
  6. _Hex*
    Brand new set of aluminum tie rods for stock length A-arms i have a couple of sets ready to go just use your stock tie rod ends and good to go nice machined look to them $60 +ride & paypal (if you wanted to use that) for faster response email me at Hexstylee3@hotmail.com
  7. _Hex*
    have a couple of sets of street bike clutched come complete had them laying around as back ups Clutches are brand new! 7 fibers (yamaha) 6 barnett steels 6 HD springs $ 145 plus ride
  8. _Hex*

    Im stuiped

    _Hex* replied to drgnass91's topic in Rides Of Shame

    never heard of that, alot of guys here in the sand dont even use outerwears let alone oiling, not me by the way but i can vouch ive seen alot of guys not use it and have the best luck. i never know why that is tho.....
  9. _Hex*
    hm i wonder then, should big drag bikes run 2 into 1's?
  10. _Hex*
    prodesign if i have to buy for a customer nothing but prodesign from now on, used most noss chariot trinity and the list goes on and on ive never had a problem with prodesign.
  11. _Hex*
    i need a right side cylinder thats no more than 64.25 had a right one with a broken sleeve so that leaves me with a left one thats doing nothing thanks email hexstylee3@hotmail.com
  12. _Hex*
    D&M racing AZ, fast stuff ... or HJR also very good..
  13. _Hex*
    sold
  14. _Hex*
    bump open to offers
  15. _Hex*
    two like new banshee billet spacers. this is a spacer kit to convert your 10x2 spinlde mount wheels from 5/8 th bearings to metric bearings. after you install these the 10x2 wheels will mount right up to a stock banshee spindle comes with both inner and outer bearings ready to go. $60 shipped dont have a camera but if you pm if you want some pics
  16. _Hex*
    complete head with 20cc domes head orings are good, has new dome orings rest are fine, one dome has some damage from detonation but can get away with maybe a little sanding 165 shipped.
  17. _Hex*
    85 hp on a 350 on gas? dunno that seems like a bit much not tying to bring you down or anything just seems like alot honestly..
  18. _Hex*
    yes.. 2nd that either that or the eccentric bolt for the shift shaft is loose
  19. _Hex*
    bump
  20. _Hex*
    looks like it just went out on u maybe just age or unbalanced
  21. _Hex*

    7mm crank

    _Hex* replied to DUMBASS's topic in Wanted

    pm sent
  22. _Hex*
    if you need pics post or pm you email
  23. _Hex*
    ttt
  24. _Hex*
    ttt
  25. _Hex*
    ttt

BHQ Quick Links

×
×
  • Create New...