Jump to content

qboronyrican

Members
 View Profile  See their activity

  • Posts

    359

  • Joined

  • Last visited

 Content Type 

Everything posted by qboronyrican

  1. qboronyrican
    yea i understand 2 sizes when going from a air box to no air box but what about a air box with lid to a air box with no lid....can't be that big of a difference could it????? oh and i dont know if it was rejetted when the vents were put in the lid....i got the bike this way already done
  2. qboronyrican
    yea you need a impeller cover gasket .....but only if your changing the impeller...if not, no need to take the impeller cover off.
  3. qboronyrican
    you think its that many sizes just for removing the lid ....huh.....wow....maybe its a litttle less for me cause i have like 4 or 6 vents in my lid but i guess i wont know untill i do a plug chop but i dot really have accesss to a open area to ride wide open in all the gears like needed so its going to be a while .....hope i dont burn up my motor
  4. qboronyrican
    yea you got it.....seal ....gasket whatever....... same diference.....lol
  5. qboronyrican
    thought so just wanted to make sure......been away from things for a while.....lol
  6. qboronyrican
    theres also a gasket under the impeller cover.....you got to take this off to take the impeller out of the case cover
  7. qboronyrican
    not only will you need a gasket for the water impeller cover but also for the trans case cover this should help www.bluetraxx.com/aluminum_impeller_new.htm - 6k
  8. qboronyrican
    ok but this is gear oil not tranny oil.....is there a difference???????
  9. qboronyrican
    ok what about with the lid on and the lid off.....any difference in jet size....if so how much difference we talking????
  10. qboronyrican
    forget it i think i got it.
  11. qboronyrican
    im going with amsoil dominator and about 35 - 40:1 some where in there....can anyone tell me how many oz. per gal i need for that????
  12. qboronyrican
    i went to my local bike shop to get trans case oil and the guy gave me Amsoil 80w-90 gear lube, said it works great and most people use it now. is this the right oil or does this guy not no what he is talking about????????
  13. qboronyrican
    also whats the jet size difference with the lid on with no snorkel and off .....anybody with some knowledge on the subject please.....would be greatly appreciated.....thanks
  14. qboronyrican
    whats the difference in jet size between a shee with a air box with no lid and no air box at all???? how many sizes if any and how much power????
  15. qboronyrican
    OH YEA FORGOT THAT PART......SLIGHTLY ABOVE SEA LEVEL 220-700 FT DEPENDING ON WHERE I RIDE THAT DAY AND AROUND 75-85 DEGREES IN SUMMER AND AROUND 30-40 IN WINTER.....WONT RIDE BELOW THAT....I HATE THE COLD
  16. qboronyrican
    so what jets should i be using for this setup???? and what about this dial a jet or power jet ive been reading about????
  17. qboronyrican
    ohh ok figured as much....thanks
  18. qboronyrican
    ok i got ya.....thanks for the info
  19. qboronyrican
    ok ....so how much can a set of 26mm stock carbs be bored out to?? and is it as good as buying new ones of the same size???
  20. qboronyrican
    so after porting(stage 1, nothing to major) what size carbs would be good????
  21. qboronyrican
    thats better right???.....if i were to get bigger carbs what mods if any would i have to make and how big could/should i go???
  22. qboronyrican
    also the person i bought the bike said it has a idle kit and from what ive been reading thats for a twist throtle but i don't have this i have a thumb throtlle and was wondering if this is a problem
  23. qboronyrican
    nope ....thanks thats what i figured but just wanted to make sure.....so far i got t5 pipes, adjustable timing plate +4, hi flo impleller, 13 and 40 sprockets, k&n air filter with outerwears and no air box, tors eliminated, boost bottle, and larger tires all around....think thats it....intenally i don't know
  24. qboronyrican
    well the carbs say mukini.....thats the brand and the only numbers i found are 2gu and a 01 under that....also lookin at the left carb(left if sitting on the bike) i see a choke pull then down and a little to the right(about middle of carb) a screw and to the right of that a very small slightly angled screw.....does this make sense??????
  25. qboronyrican
    got no camera avalable so i figured someone could explain it ....if not i guess ill have to get one when i get a chance

BHQ Quick Links

×
×
  • Create New...