dave5.0

Really? The frame work looks to be homemade but I was thinking the swinger was a store bought piece.

Dude buy my a ticket, I'll come ride with ya. I'll bring my fuel injected bike so you don't have to wait on me to rejet. Just let me know when so I can pencil you in.

Cool, let me now which ones and where to send them. My Paypal [email protected] One set has grey nets the others are black.

That wouldn't be too bad for a small group. Depends on who all comes up to this. My group would fit there pretty easy. Sounds like Yogi Bear (is it Jellystone?) might be the place for a bunch of us go.

Maier tank and radiator cover red $30? Complete red fender set with cut fronts, radiator, tank. w/or w/out stainless grills. Will make package. $150 for all plastic, $190 for plastic and grills. Stainless grills. One Irate flame $35 Just stainless with holes punched in it $20 or $50 for both. 5.6 gallon IMS tank $90 or make a package with the red plastic.

Rebuilding my bike and parting another. Have lots of stuff for sale. Shipping not included. Make offers or trades. Looking for drag stuff, lightened flywheel, cut trans, stuff like that. Gonna have more stuff so check back. Don't have pics yet, Boyesen reed cages and intakes with carbon reeds. Looks to have been ported. Supposed to be from FTZ racing. They have them on there website. $90? FTZ Mikuni carbs. I think 35.5 Mill. They have had some work done to them also. They have FTZ stickers on them. They get $440 for a set of these. So maybe $250 with a cable? http://www.ftzracing.com/ATVpg.html 2 sets of pro peg nerfs. One set of A/C racing. Not sure of the other brand. Very similar though. $65 per set. Cascade V bars $50? Pro Design shifter Should have 2 of these. $45 a piece? PRM baja bumper, I had them make it without the bar on top. Something different. $50 Blue fenders, rears and cut fronts. $100?

Alright I'm thinking sbout cancelling my trip out west and making a few days out of this one. There has to be some partying and rude shit going on though for this to happen. Maybe a stripper. That might be asking a bit much. Anyway I've got a big enclose trailer I'd bring up so I'm good in a hotel or camping. I'll need sparkies for my Shearers. Where can I get those? Can we not camp there? How close can we camp? So if I bring 4 guys with me we have to pay for the truck and each 4 wheeler? How much is that? This will be alot cheaper than my other trip so the money isn't a problem I just need to know how much. From looking at a map this is a state park? Is there a website with info so I don't have to be 20 questions guy?

I looked around your site and didn't see the override. Can I get some more info and prices.

where exactly is this place at? I wanna mapquest it.

I'm putting my 4 mill ported stock cylinder bike back together and have the choice of my 35mm Keihin Air Strykers or I have a set of what I think are FTZ "worked" 35.5 mm Mikuni flat slides. The A/S are out of the box the Mikukis have whatever FTZ does to them. They look like they have been bored or something on the inside. I haven't measured them yet. They only show one set for the Banshee on their site so I assume this is what they are. My link So if that's the case which ones should I keep? One any better than the other? I'm more familiar with the A/S but can't imagine the Mikunis are that complicated. So lets hear some opinions.

I might be game, have to see when my other trip is gonna happen.

Got this on a bike I just picked up. Looks like a nice piece. No link setup. Somebody moved the shock mount on the frame. I wanna sell the thing but want to know what I have before I do. Thanks.

Might check the case above the sprocket to make sure it hasn't came off and broke it. They tend to leak from the little plastic cover under the sprocket too. If you are just going with pipes do something with the airbox too. If it still has the stock type filter put a Pro Design type plate in it so you don't have to worry about sealing issues and sucking dirt. Make sure you jet it for the pipes too. These things are lot pickier about jetting than 4pokes. It'll run like crap and blow up. I've alway been preached to about doing a leak down test to make sure it doesn't have any air leaks. I never have but it's cheap insurance. Make sure and pick a oil/mixing ratio before you do the jetting and use a good quality oil. Good luck.

Are you gonna be racing or something? Reason I ask is I jsut bought a bike that has a shorter winger on it but its a no link setup. I've never seen on like it. I'd like to sell the frame too though. Kinda all goes together. Even have a works shock that goes with it. It needs rebuilt though. The swinger is a ladder type setup with a carrier. Don't think it's stock but has a stock type adjustment. I'll get pics if any interest. Thanks.

Still have those pegs? Want to trade them for any other Banshee parts?

I've got a Passion 4 mill with I think drag port cylinders that I'm gonna put back together. I want this buttery smooth shifting that everybody talks about. Can I make it shift like my LTR does? It's really smooth. Even under power. The bike is gonna be a drag/play bike. No trails or anything like that. Mainly sand. I still want the most ridability but am tired of missing shifts. I'll be racing anywhere from 300' to 600'. Sometimes I click into 5th and 6th at the end of a run. I'm also gonna run a Slingshot undercover lockup. Any other stuff I have to do besides? Any other supporting hardware I'll need with it?

My linkhttp://www.stevenaceracing.com/Home/index.htm

You might try and look up Steve Nace Racing. He used to promote in Kentucky and came up to Illinois as far as Springfield. There used to be a winter series that he ran at the state fairgrounds in the middle of winter. Don't know if they still do it or not.

Might have a set of CPIs for sale. Have to get them cleand up and see what kind of condition they are in.

I'll see what I can do. I'll probably keep the 4mill set up unless the other bike has something crazy done to it. If I don't get back to ya send me a PM in a couple of days. I hope to be able to tear into it this weekend. Should be picking it up tonight.

I may have the head and front end for ya. Pm me tomorrow night or Saturday. Not sure of the front end brand name, Works shocks, Cool head I think. PD.

Might have some tomorrow. Send me a PM tomorrow or Saturday. Should know by Saturday what I have.

Might be picking up a bike tomorrow that is supposed to have some FTZ ported cylinders on it. If not the other bike has Passion cylinders that are setup for 4mill. One of them will have to go.

I was in the fence but that pic looks cool. No more bending over the bench putting crap together. I'm gonna be doing some work before too long could use one. Wanna do any swapping for one? I have an IMS tank. A red one. Don't think you have that color do you? Might be coming into another bike to part out here pretty quick. Have some parts there too. Also been trying to get ahold of you on another site. You doing powdercoating? How much for a PRM grab bar for my LTR? It's pretty clean.

Ya I'd ride that too.