BansheeKid15

Turn on: Good personality, an outgoing girl Turn off: Bad teeth (i.e crooked, gap...) Its just one of those things

Ill take a OBO also... Thanks for help casper! :cool:

Is the cylinder getting fuel? maybe your main jet is clogged?

Haha, i get motivated to play pong also... good game and good times. SocalinIt.. thanks for the jetting typs/info. ill let you know how it goes

so nevermind on that drawing... lol. It looked good before i posted it pretty much, just outline the bottle in sheet metal, make some tabs to mount to the stock airbox location

I dont think it would be very hard. I havent made one, but if you still have the stock airbox, you can kinda get an idea from there the holes are to mount the bottle to, and then i would bend up something that looks like this ____ ____ l l l l l________l where the bottle would sit in the middle of that and the tabs would bolt it to where the airbox used to in the back. Not much help, but try it out.

Ya i went to the yamaha store today and bought 280 and 290 mains... since the toomey kit comes with 280's i figured it would be at least a starting point. What about the needle they give you in the package also? do you really need to change out the needle? I know its not your thing... and i havent done it to determine if its mine either lol. Any help would be appreciated, pm me so the thread doesnt get jacked

Hey man, it wasnt all one ended. You are also an easy guy to deal with, everything went smoothly! Thanks again man, the pipes should be here tomorrow, and im anxious to get the on, so you will be seeing pics :cool: Cant wait to ride with you in pismo

bump

mostly time to fix the oil leaking if its a crank seal... id say offer him 1400 for it, hell take it.

From my knowledge they work just as good as the boost bottle... but thats my experience with them. IM sure alot of people will say the same thing. If you looking for better cooling, change out the water pump for a billit one. The site is slow right now also (so one click on post and it will post it, no need to go overboard, lol)

Well its time to get sell the FMF's Gnarley's, and mounting hardware for the rear silencers. The chrome is still excellent, there is however one little dent on the bottom side that you cannot see when they are on the bike. Here are pics... $250+shipping, or local pickup is cool too. I will be in pismo June 12th-15th also. I can take more pics uppon request also. Thanks Little dent... nothing at all

i replaced it a while ago, but i havent cleaned my pipes since, lol. Should figure it out with the toomey's i just bought

Were leaving thursday later day, we should be there by night-ish time. Well park where there is plenty of parking for everyone and their haulers and such... and semi close to the water for steve and his water needs :happy: lol. Anyway, on my way home, i found this... thinking about putting it on top of the trailor... thought it was funny. You guys should be able to find us for sure. Cant wait!!!!

I hadnt advanced my timing and my pipes were blueing at the base... maybe it was running lean? I just used the buffing/polishing wheel today on my fmf's... and the polishing took out most of the blueing

I have the Thor pants also... nice material, pockets on each side, zip off, and booty cushions on the inside. I have yet to zip them off because when its hot i just wear shorts. I got them from rocky mountain, about 80 bucks. Bigboybanshee... your right, there are so many damn brands and styles! Good luck, let us know what you found

If she was beating him on her bike and his bike... Its a factor of weight (assuming she didnt weigh as much as him) and then it comes down to the rider. I know a dyno reading is not the most accurate thing, but neither is drag racing. The best way (if you can) would be to test both and decide for yourself. All the above is good information, take all of it into consideration when your buying new pipes. Good luck on your decision, either way from stock pipes... it will be a nice difference

For sure man, im looking foward to it (the pipes and the trip) Thanks for the good deal, and really a hassel free sale. I appreciate it :thumbsup:

found out that it wasnt the 5th through the 8th, but the 12th through the 15th... ill look for you guys down there. Were comin down thurs night EDIT: Me and my friends always get our shit a little mixed up, lol

SocalinIt... I have a buddy that will take the air box with the filter. Does it have a lid also?

i pc'ed mine... going on 6 months, nothing has changed from the day it was done... but that goes for my whole frame as well

And i will take them. I just pm'ed you back. We will work something out as for meeting at pismo or shipping. Thanks :cool:

can you send some pics to [email protected]? I have been looking to get some for a while Thanks, Jamie

It looks kick ass! The bike is gonna need LOTS of chrome now

Well i got tired of not having a bumper on my atv, but i didnt want to buy a new one, and there was no way in hell the old stock POS was going back on. So i decided to cut up the old one and make a new one out of it. This is what i came up with, it was pretty easy, i also have a couple other ideas for bumpers that i came up with while doing this one. clean and simple... for now On the bike, nothing was on it before O, and the plastic renew stuff works pretty well, i am impressed with it Tell me what you think! i also want to make some other more custom and one off bumpers, so if you guys have ideas...