fastrthnu

great same engine. have you seen a harness for one? NOT the same!

got a killer rz set up. honest description. Great communication. Thanks man!

Can a yfz 350 coil be used on an rz motor?

Id like to raise them a couple inches.

Im 6`2" and dont care how big it is. The larger I am over the bike, the easier it is for me to throw around. you can widen it and jack it up of course. I fprefer to widen and squat mine.

yfz 450, raptor 660/700 warrior, some polaris and maybe blaster. do A search I posted something with every bolt patter ever on here some time ago. fron is 4x156 rear 4x115 or sme older are 156 on the rear too, but very rare.

Some people have had luck, some have not. I am one that has not. Im redoing my banshee for all out mx/gncc racing and ordered some +3 a arms fro them. I also ordered an expensive pair of elka piggyback shock built to spec (to these arms) I purchased the kit with full tie rods and steel brake lines. the tie rod ends didnt come and neither did the brake lines. They sent the right size tie rods but +2 a arms. They blamed every possible variable that didnt make a difference. They insist they are right. I have this message boards info, e2s info with consistent numbers and actual video footage measurments for 2 stock banshee arms proving they are only +2 a arms. I had to open a dispute on eBay and am hoping for the best. They did offer a refund, but what abou the shocks I paid twice the amount of money for build for their +3 a arms! They have refused to send the correct ones and I have concrete evidence of everything stated. It isnt slander if its a fact! For further information and questions, shoot me a PM. Id hate for a fellow rider to have to deal with the same issues, and if you conduct a search on here, you will find Im not the only one. As mentioned, not all have had problems, but many have. Its poor buisness and Im out of a race because of it! Shannon

I got one! :cool:

I am too. I told then so. they said slander is against the law and wouldnt recommend it. So is stealing/false advertizement/misleading BS! I opened my dispute. I told them I was going to last night and they offered a refund. I dont want a refund because I bought fucking elkas to math their arms @ +3!

I went into the dealership today and filmed not pictured filmed me measuring 2 stock a arms and then filmed measuring the asr arms so that the pictures couldnt be altered. They are plus 2 a arms. IM now going to open a dispute with these videos and the gazillion e mails to and fro that they are shit dick bastards. Not to mention they did admit that they didnt include the brake lines and tie rod ends. Im going to also start a thread in the product reviews section so that nobody else gets scammed by these asspipes.

ok, thanks again. The tie rods they sent are correct. they are 14 and 3/16" They are trying to say my aftermarcket shocks are longer than stock, but they are stock length. They also didnt take to kindly to my threats.

from end to end without the ball joints or nuts, just the tube. PLEASE!

the j arms has a one peice upper arm from frame to ball joint and the a arms have two pionts at the frame (like a triangle or a)that converge into one at the ball joint. The upper a arm bolt is much longer, the j arm frame isnt made to hold these a arms.

still need!

I remember being on there yesterday and seeing all those.

I just sent them another message stating Im not going to be BSed around anymore and they have 24hrs to send the right stuff or Im filing a claim with ebay and leaving a negative feeback with a link to this topic and the one I posted in e2s yesterday when we were down here. Im sure they will leave a negative back too. All I did was pay for my stuff right away. :mad: I posted this one in a hurry when I was on the phone with them.

No, I was on the phone with the guy and a tape measure and he says 15.5" is a +3! So I can keep em or send em back he says but he swears its a 3. I could tell just by looking they werent. I already had 2`s they are the same. In fact I thing my 2s looked wider........ ASR "+3"..... Old +2`s.....

Fucking asr is telling me my arms are +3`s They are the size of +2`s. They are retarded and forgot my tie rod ends and brake lines. Im so f`n steamed man. thats what I get for trying to save a few bucks. Ive compared sizes with about 6 people and get the same numbers. So either every other company out there is making +3 +2 arms or they are BS.

perfect! thank you!

Need a measurement from the center of ball joint to the center of mounting holes at frame on bottom a arm of a +2

Ive got a decent pair of bandits on itp rims. they have a slight wabble to em at high speeds and some dings but work fine, hold air, and have 75% tread or better. $120 shipped. Im selling these just because Im getting a full set of holeshots on hiper rims., cheap b/c of imperfections......... this photo is 1 week before removal^

Ill say it the 12th time too. shut off the gas. ALSO not mentioned, if like myself you dont use a rear case vent line, your oil may leak out of that too.

http://cgi.ebay.com/ebaymotors/2-Hoosier-D...tem180219543514

need a decent unwarped and beat the fuck out of rear brake rotor. whatcha got......

right on