theshee

Just cut the back out of your airbox and leave the bottle how it is. Its free and easy. What I mean is, cut the back out, throw the rest of the airbox away, and use the back piece to mount the coolant bottle like normal.

The pics I posted do my bros paint no justice at all. It looks 10 times better in person. You would have to PM Ghostrider on here to figure out about getting something painted.

Painting plastics is not as outrageous as it may seem. If you crash, its gonna get messed up. If you take care of your bikes, it will be fine... My bro (ghostrider on HQ)paints bikes and they hold up very well. Here is a couple bikes he as done.

Welcome to HQ.... great place with lots of good people and info here... :thumbsup:

With those mods it would be hard to think there would be a whole lot of compression. I would run a 50/50 race gas/ pump gas mix and call it good just to be safe till you can figure out what the compression is. I doubt its high enough to need 110.

Good one!! :yelrotflmao:

On stock carbs, the cut out part goes toward the air filter, the back of the carb.

I use Napa 30 weight in my clutch/ tranny. I used Royal Purple syncromax before and heat set 2 clutches so I went to 30w instead. It about 1/4 the price too.

No they will not fit. I use to have a KFX and they wheels are not even close..

I agree, thats a nice bike!

I learned the best way to deal with bicycles on the road from majicmike... get a diesel, get a chip for it, and put the bicycle in a cloud of black smoke when you go by them. May not make you dislike them anyless, but it sure as hell is funny!

I dont have any pics, but white, gray, silver and black all look good on blue frames.

If you ever want a weekend trip come to Walden Colorado or KP in wyoming. It would be a pretty long drive, but worth it!

www.jetsrus.com they are cheap and fast.

Any of them 22" tall? If you have 2 that are 22" tall Ill take em.

Yeah a pic would be nice.... Im with firehead, carbon fiber doesnt melt so I dont know what to say.

Alba sucks hardcore... I ordered a set of ball joints from them they said were in stock, waited 3 weeks and never got them. I called them time and time again, and they said they were shipped and they couldnt do a thing about me not having them. I finally got my $$ back after two months of calling them over it. I would NEVER try to get anything from alba again.

Not sure what all your mods are.. but its hard to go wrong with a 21-12-8 8 paddle hauler.

you can try... Cascade Sand Toyz Unlimited Jims Sand Toys

You can get them from www.jjandaracing.com they are very light, just a little pricy.

Ive got some... $20 shipped. They came off my wifes Banshee.

Nevermind.. I cant find the new one and the only one I have is a twist cable on a twist throttle set up im not using.

Ive got a brand new one... Paid 28 for it, will sell it for $15 shipped.

If you are into trails and such just get some bigger carbs, pod filters, reeds, and a timing plate. That would wake it up some more. Reason i asked what riding you did, is if you were just all dunes, you could have got a 4mil crank and gone that way, but I dont know how well that would work in the trails/ woods ect. May also cost a little more then 800, not 100% sure. The carbs, pods, reeds, and plate will help quite a bit though. Call the # in my signature, Mike will hook you up with all you need.