moneybags

The carb and pipe swap were made at different times. Some of the problems with the lectrons I had were, constance overflowing, unable to get enough fuel to the motor with the PJ's wide open wile still drounding in fuel on the low end. O and the dam carbs were called 40 but they only messure out to 35/6's. lame Yes, they had the PE1 needle

If it were me, I would do this. Keep the 36's you already have for now ( if their working good for you) and step up to a set of 39's when you go to the full drap port. For me the lectrons sucked ass. I see alot of people talking them up on the fourms. But IMO Half of the people who are always talking them up, have never owned a set... The 4mill dune port that jeff did for me was a beast... Even with T-5's and 20 -10-9, 9 paddles. I started with T-5's and 35pwk's and moved up to sheares and 39's. It was night and day differances after the switch. n2otoofast4u, it was on alky with a pump. I bought them brand new. They were on my 421 first then my 10mill...

Lectrons have been nothing but headakes for me. I will never run a set again. I've gone from 35's to 39's on a 4mill stock cylinder dune port from F.A.S.T Racing. it was night and day differance on the big end.

Location?

So whats the price on the bike?

I dont think you will like what people offer you for it. Please post a asking price. Thanks

+2+1 a-arms

The same, 8's for gas and 9's for alky.

Yea what he said. I had the same problem with my hinson setup.

I made the mistake of using some hose that looked cool but was to soft. You could see the pulse line colasping under just alittle throttle...

Did you get a title with it?

I believe it has been done befor on here with DMC pipes.

Even if the new Sniper pipes are only as good as sheerer pipes. I would still buy them over the sheerer pipes any day. The Sheerer pipes run good but everything elce about them sucks ass IMO.

So a guy walks up to a hot chick and says, " I was going to tell you a story about my dick to try to impress you but its to long. The hot chick looks at the guy and says, thats funny, I was going to tell you a joke about my pussy but youl never get it...

50K people at Sand Mountion, lol. You guys have a good time. I will not beable to make it for this trip. I hear they have been paving the rode at SM. Not sure how far they are going with it but it should be nice!

So the motor still turns over, if it will look into doing a compression check. Pull the spark plugs. See how do they look.

Depends on who ported the stock cylinders.

Boy I tell you, some peoples kids...

up

Selling a nice set of 39 PWK carbs that have been bored out to 40.5 by ESR racing. They have Billet bowls from chariet racing. Gravidy fed. comes with the Dave moore power jets. Not to be confuised with the DM super jets. The boring jod on these look awsome, not a hack job... 350 obo

I have not herd back from n2otoofast4u on the cylinders. I still have them for sale. Its cool dwaddle901...

Yea I recieived it. I dont reply to lowball offers....

Still for sale^

so nobody wants to go fast? to the top.

so I cleaned out my PM box... should work now. I dont have any port timing specs...