IROOST1

I am almost finished building my banshee fromthe ground up and cant figure out where the hoses route to. The manual doesnt show a very good picture. I know there are two little lines coming off the radiator. Which one goes to the resivoir ??? And does the little line coming out of the case on the right side go anywhere??? HHEEEEELLLLLPPP, I wanna ride it this weekend...

Try Ebay, its the easiest way to get a ton of people to see them....

Him or his brother???

Oh, sorry. That would explain why i couldnt paypal him the money to ship the missing stuff. So i sent a money order for 15$. Thats the last i heard from him. He said he found the cdi and little white coolant resivoir bottle and was going to send it to me. But in total, i was missing the axle, cdi(should be 3GG...), the axle nuts, the end axle hubs, and a pep steering stabalizer. Thats all i can think right now. I bought an axle already and have some old end hubs but would really like them since i did pay for them. I can send you the ad for the fourwheeler when i bought it, if you need proof of what he sold me. Let me know if you find anything from the shee that he "withheld" from me. I can meet you halfway on the shipping but it HAS to be paypal'ed. Thanks for the reply. Dave It was all in pieces. And a buddy, me, and him were loading it into my truck. I did do a run through looking for stuff but most of it were in buckets and there were supposed to be extras. So I just went check check. Also, I trust people. Ill have to be more carefull next time.

Theres no way an easy out will get it. This thing was on there so hard i had a four foot bar on my ratchet so if the grade 8 bolt snapped, its in there good. I have tried drilling stuff like this before but i cant maneuver it in my drill press like the others. Whats a good drill bit? Or should I say, whats the BEST bit for this job. Usually i just buy one from home depot and when it craps out, i return it to another home depot store for another.

Shit, i bought this shee and got screwed, i am trying to strip it to rebuild it and the rear footpeg bolt broke clear off at the frame. The guy already had the other 3 drilled and half a$$ed. Whats the easiest way to get it out or drill and should i tap it or what. Any ideas........

I might have one from somebody else first. But ill let you know if it doesnt work out.

I got screwed on a shee i bought in pieces, he said it was complete but in pieces, i think not. I need this stuff cheap, im unemployed and am trying to get this thing done so i can go ridin. I just need some nerf bars with the nets still hangin on blue or black or ???. A clean res bottle, 1 axle nut, i have one on hand. and a cdi that works for a 95, i think its 3gg???? Also anyone has any ideas on what i should use for the larger carbs it has. I think there 34's and he just cut the stock manifolds and jammed em in. Are the aluminum ones on ebay that get rid of the boost bottle any good? I use paypal...... Dave

Dont buy a carry-on 4x6, i use it for my bike and when i tie it down, the whole damn trailer twists. If your gonna get one, get a very good one. Spend more money now-save money later.

I bought a shee from this guy, I paid 12hundred somthing for a 95 in pieces. He said it he had all the parts for a complete one and had all these good extras. I drove from chicago to akron ohio to get it. Then he had no title. Whatever. Then I get it home. There was no axle, end hubs, bars, cdi, res bottle, and on the frame, the front brake line holders were cracked off, the stem threads are stripped, The frame is bashed on the back and the air box hooks are smashed, and both front brakes were bashed. And the front tires were some crap rigged and the one didnt even hold air. There were no tie rods, just some half assed +4's. He said there were bills pipes but he didnt say they were rusted to shit. He also said there was a pep steering stabalizer. He says now, he doesnt have any of that. He says it was right next to the other stuff. But I keep emailing him. He all of a sudden found the cdi and res bottle and says he will ship them to me but i need to send him a money order so I send him 15 bucks for shippin and its been two weeks and nothin yet, i am still trying to get all the parts before i even try to assemble this shit. I hope the motor works. I hate people who rip others off. Ill stick with ebay, at least they are honest.

Latest I have seen him was at tuf racing in sycamore il. He's doing contract work. He did my banshee cylinders last week. Great guy. www.tufpowersports.com

Sorry, the fronts are what i needed. Thanks anyways

Do you have pics of all four tires???

Yeah, its got some good stuff on it. I have race cut white plas and a full set of red. Its got douglas red labels and repainted bills pipes. Also the tors are gone and it has the idle screws installed. If that changes the price any. Im in illinois and it doesnt seem like there are many quads around here. I am normally on my yz250 but am just getting into banshees but will need to sell this one, im out of a job and moneys tight.

Whats a 99 banshee worth. W/title and a fresh 01 motor with everything where its supposed to be at. Nothing broke bent or whatever. And the whole thing was just stripped and repainted and everything cleaned, greased all up, and flushed out. Also, whats the best place to sell it??? Ebay???

Tufpowersports in il just did my work. 3 days and i had my cylinders back, bored honed and chamfered. They look great. 80 bucks only for both. Beat that. WOW. Just ask for Eric Gorr. Im pretty sure he used to own Forward Motion. He does great work. He does a lot of high performance work.

Where in illinois are you, i bought a frame last week and it was a piece of shit so I may need one?

How much for key switch(with key hopefully) and maybe if you have a taillight?

I need something wider than the little rims a guy had on the banshee I bought. Any aluminum or chrome rims, itp, doug, ???. Need them cheap, i dont care about niks or dings. And maybe some good tires, razrs??? Let me know what you got, pics are good too. I paypal.

I have one for ya, its in good shape but has some dirt, rust and red spray paint on it. I can send you a pic of it. Email me @ [email protected] if youre interested. $12 shipped or I can strip it down to bare metal with a wire wheel for 15.

I just got another banshee and these race carbs were just stuffed into stock manifolds. So I need some good ones cheap!!!!!!!

I've Had Glasses all my life since I was 4 and refuse to not wear them. Otherwise I run into stuff. They aren't a problem at all. Except the last time I went down on my yz250 and my glasses smashed up into my helmet and the metal that holds the nosepieces slashed my forehead all the way up. I bet no one has had that happen.

How much for the chain if its good and at least for plus 4 swinger?

Can I get prices on axle and nuts, overflow bottle, tie rods and ends, and maybe front rims. Shipped, 60188

Check your email, i sent offer. Dave [email protected]