Jump to content

crazybluerider

Members
 View Profile  See their activity

  • Posts

    134

  • Joined

  • Last visited

 Content Type 

Everything posted by crazybluerider

  1. crazybluerider
    package deal for shocks and arms shipped to 97211? Are the front shock setup for the a arms?
  2. crazybluerider
    Shocks set up for those arms? What about the rear? has it been revalved or anything? Package deal price for shocks and arms shipped to 97211?
  3. crazybluerider

    cub cylinder nuts

  4. crazybluerider

    redline serval

  5. crazybluerider
    Do they both have rotor mounts still? How much shipped to 97211?
  6. crazybluerider

    longtravel, race gas...

  7. crazybluerider

    elka rear link

  8. crazybluerider
    Do you still have these?
  9. crazybluerider
    If it is a 2 wheel drive truck with the 2 piece drive shaft it could be missaligned. Some of these drive shafts were not aligned properly from the factory due to a cross member being missaligned. Bel-tec makes a kit to repair this. It fairly cheap. I dont know exactly how much the kit cost because the suspension kit I ordered from them came with one.
  10. crazybluerider
    Heat gun or a propane torch. Ive had better results with the heat gun as you have a little more control.
  11. crazybluerider
    Here in portland they were trying to pass a law so they would have to get tabs for thier bikes. You shoulda heard the uproar. I think they use the road they should have to pay for it. Cars all have plates bikes should too.
  12. crazybluerider
    DMC maeks one i think it is the 916 model.
  13. crazybluerider
    I built my +3 for my 450 out of round .095 1 5/8" chromoly and it has held up very well. It is 1/2lbs heavier than the stock aluminum swinger. It was 12lbs for the swinger and carrier. I building a plus 4 for my banshee right now out of the same stuff should be a lot lighter than the stock banshee swingarm.
  14. crazybluerider
    I could be wrong but I think its for the choke. Its on the carb with the choke handle.
  15. crazybluerider
    I just saw that you were in Australia. I go the K&N part number off the box for ya and the outerwear# maybe you can source them locally. K&N# RU-1060 OW# 10-1066-02
  16. crazybluerider
    Cascade has them just order filters for 28 keihins. I just got mine yesterday and they fit perfect.
  17. crazybluerider
    3-6 lbs depending on how dry the sand is.
  18. crazybluerider
    The thing that really pisses me off is the fact that they used an air cooled 250 in that rappy when they could have used the yz250 motor. At 310 pounds that would have been a bad ass bike. I really dig the orange on the YFZ lt.
  19. crazybluerider
    look for an old jet ski trailer. They are pretty light and you get full size wheels, 12s instead of 8s. Little wheels make me nevous towing on the freeway. I got a 2 place a couple of years ago for 200$. Fits one bike awesome and if you get a little creative you can fit 2. I just had too put a deck on it but thats cheap just use 3/4 inch plywood.
  20. crazybluerider
    The power of a four stroke is deceptive because you do not have the hit that a 2 stroke does. I know that my 450 was way faster thatn my banshee until I put my noss head on. But my banshee always felt faster because of the way the power came on.
  21. crazybluerider
    Ive got a set of oval bored stockers that i could sell. Comes with tors kit, k&ns, and cable. PM me.
  22. crazybluerider
    maybe :biggrin:
  23. crazybluerider
    I'm with this guy iff the stock platic fits and it still a twin your on a banshee. I think stretched frames come with the territory. Im thinking about stretching my duner 3 or 4 in the front
  24. crazybluerider
    I sent pics this morning. My camera was goofed up yesterday so i had to bring them to work and borrow someone elses. You should have mail. I can do 50 shipped.
  25. crazybluerider
    can anyone else see the problem with this picture

BHQ Quick Links

×
×
  • Create New...