CFM

If I had to do it, I would stand the first quad vertical, belly facing the cab. A shortbed is 6 foot correct? If so, the first quad would be 3 foot back. Then weld a decent rack to hold the second parralell(sp?). A 50 inch width would put you 12-15 inches over the gate... Prob enough room for the pull-behind.... Just an idea

6x10 trailer... 1000 dollars well spent. You will use it for more than hauling quads also, trust me.. Bed of the truck, gear, cooler, pop-up tent, beer, food, chairs, grilll... etc..

A good manual with diagrams is also in order for his problems..

What size rear axle??

I've got new bare ones at 159.99 Let me know..

Nice FMF Fatties full system, 200... LMK Scott

$45 shipped good condition....

FMF Fatty's complete system, chrome looks 85% 225 plus 15 for shipping..

I saw that 95-96 mag, and it always stuck in my head that it would be a cool kit to have. They also did a feature with this kit on the 89 Zilla I'd pay 4-600 but no more... 2200 is the reserve... I managed to get him to give that up... He claims that the kit was 2500+ and is in mint (under 4hrs use) Told me that it was best used for hard pack trails. It just sinks when in powder... Mint cond. rode for 4hrs, spent 2500+ for it and now for sale.... Maybe there is a reason for these conversions not popular on the market... Cool concept, but not worth the 2000 coin IMO.. (Would still buy it for $500 though..)

I was actually going to put that in my responce, but have no idea how much snowmobiles cost.... I imagine 2500 could score something nice??

Just got off the phone with him... Seems genuine, he said it was the first time selling on E-bay. He's been a member for 1 1/2 years. Reserve is above $2,000 Said he paid alot more for it...

I believe you got the last black one... :beer:

All I had yesterday was a "Sharp viewcam" and could only take short video clips... How, or can I upload stills from that?? It is a digital unit.. Had a 21 ton front end loader totally re-shape and contour the land along with removing a 40ft dia round 12 inch pad, along with 4-5 HUGE stumps.. They were 10 foot diameter at the roots.

Spent a couple years there, but not there now..... Damn.. Falwell condones ATV's?? Isn't that a moral southern sin?

Back at ya..

Cool Head (majic racing, knock-off) w/ 2 sets of domes, 20cc/21cc, 2 sets o-rings, have 8 studs... $130 shipped http://presstimecolor.com/forsale/Head/ Interested in any trades?

Thanks, :thumbsup: Glad I could help..

Recieved, and PM sent. Thanks

Recieved, and PM anwsered. Thanks

I'll respond to all q's tonight, I'm running out the door to meet a front end loader at the worksite Thanks

Sorry, just a couple 4's and 6's, all bare. No, just rectangular tube. Here's a list Roundhouse... 3pcs 6'' 4pcs 4" Stock carrier 2"... 3pcs Blk 4"... 6pcs p/c 3pcs Blk 6pcs Vein 6"... out 8"... 3pcs Blk, 7pcs Vein 10".. 2pcs Blk, 4pcs Vein 12".. 1piece P/C 5pcs Vein None of them have provisions for skid plate mounts.

Limited sizes/colors. No 6 plus, sold out. Reg arm $110 shipped Bare roundhouse $155 shipped Recovering from a divorce and trying to build new location.. Need to get the concrete pad installed.. ($4500 Ouch..) Any bites????

Bad news on the homefront.. Trying to move into the new spot, but zoning has an R-2 rating. They are giving me a hassle about my building 30' by 60' going onto the 1.08 acre plot.... Any construction guys here to help me out?? I've done gut and re-hab 5 story buildings in the past (5plus yrs) As a sub, so construction is not my main concern.. Applicable zoning laws in rural NC??? Have a site, or do I have to deal with "Moe@Clem" the county boys....

I've got the "welcome to fabulous Las Vegas" Historic sign on my calf.... Memory card is lost right now, so pics is a no-go...

Mark, I had an older guy drilling the plates on the mill, and apparently he did not set it to .000 It's a digital readout.... Thought I caught all of them, but some slipped through... Everyone I saw/packed I would modify a new gaurd and sent it free... Let me know if you need any help on the issue.. Thanks.