CFM

I'm looking to trade both of my bikes for a nice 4x4. Where I live, and the amount of property work I need to do it is a better thing to have... When play money comes back around, then Banshee's will come back. Basic list.. 2000 with title, FMF fatties,VF3,Billit intakes,Armadillo arms 2-1, bumpers, AC, TAG bars, etc 1992 With Bill of sale, Fresh P/C parts inc frame. Needs rims and misc parts to ride. Currently dissasembled. The 00 engine tossed a crank bearing, so I put in the 92. 00 Enging needs cleaned and bored, piston kit etc. Have some swingarms left, so you can choose for both. Also have a Fresh 2006 top end, cyls and head.. Who's got what? I'm located in 28655 NC. I have alot on my plate, so if you have a different bike, or you MAY be interested, or if you do not have a title, or want to trade something else than listed (good clean 4x4), than please refrain from offers/asking for parts/payment plans/etc.

For any type of trails I believe that's a bit high... Then again, what do I know, I just crash them well....

Dammit my side still hurts, don't make me laugh that hard.. :yelrotflmao: :yelrotflmao:

Mark, if you do design one, please allow for the Stainless rods running from my knees to my hips (Femurs) It may complicate the project.. Did that one when I was 18, my first helocopter ride Mom always said I was hard on my body, but I guess I never listened.. Thanks for the offer on the arms, but I already had some new Armadillo +2 arms that I installed. Also took the fresh engine from my other bike and have it just about in. Had some fresh powdercoated pegs and TAG bars that I also bolted up, and it looks better than ever. Needed... Front rims Grips Lever Rear tires (pinched the sidewall) Original engine.. Piston, crank shot Have to split cases to clean Get away with a .020 bore/hone (minds well send them to Jeff for the works inc. porting) Head pitted (buy cool head) Money pits, that's all these are. While I rebuild, Minds as well lighten the flywheel, port, timing plate, polish covers, shift star, case saver, stainless bolt kit, weld new crank, WTF, this is gonna be $800 Good thing I love these bikes. Heck, I haven't been over to the storage place for my stuff, I'm sitting on a rear tire/rim with a Banshee seat on top for the computer seat. Just forgot how these things hit, It's the first time in a while that I can just ride everywhere (moved here 6 days ago)

Hurtin, but OK

Does not heal as quick as the 2002...... Went to jump over a 2-3 foot wide drainage ditch and leaned back way to far. I hate twist throttles, but this has one. Leaned back, grabbed WAY too much gas and got pitched. Damn Banshee looked like a missle! It rolled a bit, collapsed the left front a-arm, then got pinned upsidown (don't know how it kept running?) Ran WFO for 20-30 seconds while I laid on the ground trying to breathe, then I heard it grenade, WHACK, BOOM crank bearing went bad.loaded the whole left side with shavings Whole left side rashed as hell, butt cheek yellow/brownish// Ouch!

Damn if I did the same thing like 2 days ago..... Going to make a new set on the lathe... I'd offer you a set, but I have no idea when I'll get arround to making them...

It's just called "all threaded rod" I've got one of those handy do da's in my toolbox also..

My next set will be Kenda Knarly 20-11-9 Everyones sold out right now...

Direct bolt in replacement. :thumbsup:

Looking for 20's thanks.

What size are the tires?

No problem. I will be gone most of the day prepping a trailer for transport.

Leaving town on Saturday, somebody needs some pipes..... $165 shipped and I'll throw in a brand new set of black chain rollers :thumbsup:

I grew up in King of Prussia area and did a trip like yours a couple years ago. Took the southern route out, and the straight line (think it was 70) through the middle on the way back. Anyway, my point was that it's (in my oppinion) alot nicer doing the southern route (40). More scenery, the Hoover dam, AZ, etc.. I enjoyed it alot more. When you take the straight line, you are basically sleeping at the wheel for 3 days straight... I caught myself bieng "zoned out" too much, and not paying attention to the road. Plus, 2/3 of the country on that route is nothing, just fields and cows, etc.. You're gonna be in the car awhile, make it worth it and have some fun with it , some of the coolest memories I have are from my trip and the drive out there (Santa Monica) :thumbsup:

I'd be interested in the plastic...

Would also consider selling the complete engine.. Price Depends on exactly what you want, and shipping location.. Hotrods crank, fresh motor, very clean.

http://cgi.ebay.com/ebaymotors/Yamaha-Bans...sspagenameZWDVW Have black also..

No, they are flat on the ends the tube that protrudes ony comes out 1/8 inch or so.. If you are looking for a set of decent useable pipes than this is good. Looking for mint chromed and perfect, than it's not.. Thanks, Scott

another

pics

P/C cly

Pics of stuff..

64mm bore, very fresh, mabye 15-20 hrs. The P/C is new never run. No porting, comes with pistons, no gaskets (have them never used, but cannot locate) Pics.. let me look. For 100 extra I'll throw in a second set that needs a sleeve in 1 cyl..

Just as the title states. Shipped promptly and very well packed. Very happy with Top end/VF3's/and billet spacers. Communication is 100% also Thanks for the sale.