ThE_BaNsHeE_mAn88

ok i want to put skis off my snowmobile on my banshee just to try it out in the snow. and was woundering how i could do it. i though you could take your front brakes off and just bolt them on the spindal. i think i might try that way but if you guys have any more ideas then just let me know. thanks. Derick

thanks man i guess ill take it apart again i just had it apart two weeks ago for the clutch and it makes me mad that i have to do it again.

what will happen if i dont fix it right away?

ya it leaks out of there when it gets hot.

get a cr250 clutch and purch it makes your clutch feel softer the ratio is the best out there.

ok there is oil comming out of the case where the clutch arm goes into the case. i pulled the dip stick out and there is too much oil in it. but the oil only comes out when it get hot, so i was woundering if the reason y its comming out is because there is too much oil in it? oh and has anyone had coolent leak into the case? thanks in advance. Derick

how much is it to get a swing arm cut? i have to get mine welded because its cracking so i mine as well get it cut and then welded.

Welcome to the HQ man.

i would have brought something off the top and conected it to the bottom like the ac bumpers. but hey man that the way to come up with a new idea. nice idea.

i dont know what type it is but you can get it out of rocky mountain. i think it is a waste of money because its like $90. i would rather do other things to my bike then that.

ya that is scott murray. and that is his show im going to today. he is perrty sick i guess what he said is hes going for a double backflip and there are going to be tweo quads there and one is fliping. it is going to be an amazing show.you should take a ride up in your truck if nothing else. if you show up ill be the only banshee there and its blue and white. so hope to c you there. Derick

well im goign riding to helps tomarrow to see a freestyle show and was woundering if you wanted to go?

engine ice works grrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrreat!!!!!!!!

sorry man this has nothing to do with the tires but i live close to iron mountain and im always looking for people to ride with. so pm me or somthing and we can talk.

i love my yfz front shocks and would suggest it to anybody ona a budget.

the truck is gone.

twisted fab works has it for about 180 also. i think im going to do that to.

i have a set of trail tech fat bars and there atv low. i have low because i do more jumping and mx. i think it would be worth the extr money to get trail tech fat bars because i flip mine 3 times once on the road and they havent bent yet. my frame bent befor they did here they are. i got the bars for 62 and i got the clamp off some guy on yfz central new for 35. so look around and you can find some good ones.

i ahve a question do you have to use the yfz master cylender when useing the break caliper?

man me and my friends use gas to seat the beed on his beater car and it works amazing.

well i would get some elkas with no rezzies because there good and cheap and lateron you can get rezzies for them. maybe some full flight a arms and get the back shocks worked on for sure. and i would go with the g force axle because there strong an cheap. and i dont know how much it is to get the swingarm cut but i would probly get it cut to -1 to give you some more traction. but it all depends on how much money your willing to spend. but im with DMC i would go with elka ther good shocks.

so y do you flip your hubs like that? i flip my rims in the back and got 1.25'' in the back on both sides.

you have to get shorter valve stems. but i dont know if i would do it because its realy hard on the balljoints.

how much for the frame?

if your putting fat bars on it then you will need 1 1/8" bar clamps