SAVAGE420

Nice Chance. Tons of wildlife around here also, almost hit a grizz up behind my place last year. I don't have an extra stock light to give you though.

There water resistant , not water proof.

Just like it says. Deto and preignition will pop your top in no time at all.

http://photobucket.com/

This is exactly what you need from Jeff. http://www.farmandsandtoys.com/partdetail.asp?partid=140 But if elka has one cheaper shipped grab it.

Yup, OEM is stock. There the best in my opinion. I would send the other one back for a refund as i did mine.

Shitty deal.

Ive said it before and i will say it again, motion pro cables suck ass. Ive always used oem cables. Then last year i said to myself "im going to try those pretty looking SS braided cables" (clutch/ throttle) Yes they look cool and all but thats about it, both were a lil short i got them to work but then both broke within a few rides. I will Never run anything but the trusty OEM cables from now on. Keep them lubed up really well and they last for years of smooth operation. Theres a few story's just like yours on here also about this same problem of fitment. Im sure some people have had good luck with them, but ive seen/heard more bad then good. Only heard this the last few years though, maybe long ago they actually made them quality and now they have someone else making them for them to save $$$, who knows.

Title fight was a crock of shit and this beer is good thats all im saying. ...and a rematch!

http://bansheehq.com/forums/index.php?showtopic=99361 At the top of this sub forum. ^^^ Probably 50+ guys with the same set up, have a look through the pages. Stock carbs? What pipes? Holes in the lid? Temps up in FT Simpson?

Damn, thats pretty cool.

There cheap all day on ebay. http://cgi.ebay.ca/Banshee-Adjustable-Timing-Plate-/250678447365?cmd=ViewItem&pt=Motors_ATV_Parts_Accessories&hash=item3a5d998d05#ht_500wt_1154 Ive used the cast one for a bunch of years now and never had a problem. It does its simple job. Very simple install, just you will need the flywheel puller and some blue lock tight for the 3 bolts that hold the plate on as well as the flywheel nut. Probably 50+ threads on it here Puller is cheap to buy also.

Thats factory 2007 Plastic and graphics.

Yup as said it's right here stamped

Well i was out in the shop and i already had my cover off, so i whipped out the cam (blurry sorta) and here you go. Might help might not, but what the hell right http://i27.photobucket.com/albums/c164/savage_420/Throttlehousing1001.jpg http://i27.photobucket.com/albums/c164/savage_420/Throttlehousing1002.jpg http://s27.photobucket.com/albums/c164/savage_420/?action=view&current=Throttlehousing001.mp4

You're trying to put the extended lever on?

When i had my 30's i didn't have a problem at all with 1/4" line without any clamps and just a zip tie. Just heat the lines up so they form to the brass fuel inlet and then use a small clamp or a zip tie tight. Heat the line up really well though, so its really soft just before melting so it forms a tight seal around the inlet. Good to go.

Well there are ALOT of pipes for banshees out there. But you cant go wrong with T5's for what you want to do. I ran the set i had for 3 years and they were damn good.

T5's For where and how you ride IMO.

Mine and a bunch of others are in here. If you would have used the advanced search at the top right it would have come up right away. http://bansheehq.com/forums/index.php?showtopic=131038&hl=temp&st=0

Nice man. I had a 91 2500 similar to that about 10 years ago, lasted a long ass time. I say dont lift it and just throw some BFG A/T 285's under it and call it a day.

Nice bowtie man.

Thought you were going to all of Sandfest which is right now.