dajogejr

Depending on how gold your port is.... 15/43 and be done with it for trails. 14/43 for MX. You don't need top end for MX, what you need is power right now and out of corners....that's why 4 pokes do so well. Well, that and their suspension is better. If you're using 21 inch tires for MX, that's another problem. You want 18s....

Depending on how gold your port is.... 15/43 and be done with it for trails. 14/43 for MX. You don't need top end for MX, what you need is power right now and out of corners....that's why 4 pokes do so well. Well, that and their suspension is better.

Regardless of the utility, you can refresh/renew your IP via a command prompt, for wireless or wired connections. You do NOT need to use their utility. Start Run type cmd click ok Type ipconfig /all You should see your adapter here. type ipconfig /release Type ipconfig /renew You do not need their utility, IP is DOS based, believe it or not. You can do any command in DOS as you can using their GUI utility, and more...I promise. If you can connect to the router, but not the net, start looking at firewall or other programs that may be blocking you. If it's that bad, give you wireless card a static IP and be done with it. Then go buy a linksys... What version of Windows, by the way?

Aha...well allow me to retort... (Classic Pulp Fiction line, sorry...had to...LOL) What kind of terrain do you ride on, how much do you weigh, how often to you actually get to ride your shee @ WOT...what kind of racing do you do? Your bike might pull 90 MPH gearing. But if you ride trails, you're not doing 90 MPH through trees. Your bike might also pull 90MPH gearing if you weigh 120 lbs. Probably not so effectively if you weight 250...

Bro...if you need to get 35 shipped out of it, next time just say so... You can't blame these two for making offers, it's what you asked for.... Good luck!!

No...those are actually ESR Pro X setups, 409... You can get them with and w/o the Powervalves...

Two things, air leak... Or the pilot/air screw circuit are dirty/plugged/not adjusted properly. Air leaks or lean will not run like that too long....

Two things...what exactly are you trying to accomplish with this utility? Second, why not just throw it in the trash, and get a Linksys card....??? And which revision is your card.

My opinion, not even close.... Those intake ports are funky looking for sure...can't wait to see that thing run!! I kind of like the added bridge in there, probably won't stripe the intake side pistons quite as quickly...

He looked pretty winded in the first round against Tank....I don't think his conditioning is quite there....yet. Oh, and I can name one... Rocky Balboa.... ROCKY...ROCKY....yo Adrian..... :yelrotflmao: :yelrotflmao:

Hey...a win is a win, even if it's by default. :biggrin: I was really nervous about racing Doug...right before we staged, he realized his upper bar mount had broke off the frame... I'll take a bye....LOL. Rog...you busy tomorrow? Any way you want to come out to the ice...maybe come out to the East side if you can stand the cold...LOL... bay should be fun tomorrow... You can hang at my house on the way there or way home to warm up and shoot the breeze if you want... I'm 20 minutes or so from the ice where we launch.

Just remember, I won the Gambler race @ Bob's last year....last race of the year. I'm the returning champion...come knock me off my perch.... And yes...I still have the slip, I haven't framed it yet....YET. I'll have to give Ben a copy.... LOL... :whistling: :yelrotflmao: :yelrotflmao:

I've always heard they're very comparable as well. If money is not an object (first of all, send me some then...LOL) I'd go Trinity only because of the stainless steel. T5s are in greater demand....but that also lowers their price cause everybody has them. Trinity makes nice pipes for sho... RN Brad runs them on his duner and he swears by them. Speaking of, wonder where he's been???

I got your medicine buddy....loose spark plugs...LOL... Yeah, it's a good thing we bracket race, it's be real rough on us heads up! :yelrotflmao: :yelrotflmao:

Honestly, you have two shees with bolt ons only. A dune ported 4 mil stroker motor would probably make you mess your drawers first time out. I'd go that route first...then get your need for speed on if that's your cup of tea!!

Tell you what...before I answer that...do you have 2500 to 4 K to do an aftermarket cylinder build? Not trying to be a smart ass...but if you're gonna do it, why do it half ass? Carbs, pipes, cylinders, head, clutch, tranny, swingarm...shock. That ought to get you started thinking in the right direction....

Sorry...there's been a national shortage on chrome....your parts might be a while. How's November looking??? LOL I didn't know you were building a DM...otherwise, I think I still have the edge and a few slips to back it up.... LOL... Yeah, I'm getting real antsy to hit the sand. JT's gonna hand it to me on the ice tomorrow...for sure!!

The majority of the work is done on the shift drum. Gears have dogs removed and the remaining dogs are "ramped" or angle cut.

Both of you can get a spoon and eat my ass....31 flavors.... :yelrotflmao:

Yes and No. Your bike will only go as fast as your gearing and tire size...no matter if you have 35 or 120 HP. Now...higher HP bikes normally rev out further, take that into consideration. You run higher gearing on bigger bikes for a few reasons...with too small gearing, you just fry the tires and run through gears. With enough HP....you get through the gears no problem... Again...bigger gearing will get you more top end IF your motor has the HP to pull it..and pull it EFFECTIVELY. What good is monster gearing to do 85 MPH if your piped banshee takes forever to get there? The calculator doesn't have to take into effect HP, all it has to do is allow variables, which it does, by engine RPM, gearing and tire size.

Ok...and on the lighter side...this is one god damned funny video... http://www.youtube.com/watch?v=8FxagxdTags...feature=related

I know...Griffin has that deep...almost retarded tone to his voice, but he's very humble and pretty well spoken. Tyler, check Faber out...he's an absolute animal.... http://www.youtube.com/watch?v=xeTwoArV2ME Fast Forward to about 3:30 of the video to get to the real fighting and past the "fluff"

I didn't think you would chase...no worries. I know it's all fun and games... But sooner or later, enough is enough...I think you'll agree. We're all proud of what we have, land, air or sea. In today's age of digital cameras, phone cams, etc....it's a Picture per second society...I know... But I've come here from day one to learn first off, try to help others....and have some fun with friends... But I try not to have that fun at the expense of others trying to learn and help as well....that's all.

It's going to be interesting around here this year, seems like 90% of the guys are going with a lot bigger motors...one of our friends is going to be flat our retarded. BIG motor.... A lot of guys here are going down to Gilbert for the PS drags. It seems no matter where you go...this track is faster than that one, this one is slower...etc. When you hit a Planet Sand event....the numbers stick... It's a sanctioned event with all the big names there. Well, maybe not ALL, but a good majority of them. When you want bragging rights and want to back it...that is the place to do it. I was being a little too big of a dick a page or so back to Brad, (banshee332) we've had some great conversations and compared setup notes, ideas...etc. So...it's all roses...LOL... My point was though...and still is, sand is different. Just like flat drags to hill shooters...pavement to dirt, etc. It's gonna be a good year...can't wait for warm weather!!!!

What a novel idea...I, as well as every other member on here change our personal preferences because you felt the need to let romper room run wild on this forum... Why on earth didn't I think of that. I'm fully aware of what you can and can't do. I'm sure the thousands of other members appreciate your humor in the numerous other threads you're a dipshit in....and they will just jump at the opportunity to change their preferences. Let me guess..you're the kind of clown that blares your radio so damn loud that you can hear it for blocks, but you think it's all ok because you're in your own house??? Seriously, have some consideration for ALL the members here...including the ones that don't want to, and shouldn't have to adjust their settings because of your dumb ass. Think about the people that actually have useful info in their sigs. Like how to tear down something, sponsor links for people who feed their family off money they make from this site... You know, useful stuff. then again, I forgot who I'm talking to. Useful walked out your door a LONG time ago.... Like I said... ha ha..it was funny, now have some consideration for ALL the other members, not just me....