Jump to content

j28d

Members
  • Posts

    129
  • Joined

  • Last visited

Everything posted by j28d

  1. Pm sent, I have some Denton stock width j-arms in good conditon.
  2. I'm almost postive I threw the top end gasket set in there, check the bottom of the box to make sure it didn't slide under.
  3. Okay, here are some pics of the roller. It's partly disassembled, and the rear wheels are sold. You get the straight frame, steering stem, a-arm assemblys(spindles, a-arms, rotors), swingarm, rear carrier with the axle and wheel hubs, front and rear painted fenders, radiator, gas tank, front and rear shocks, complete front brake system, stock seat in good shape, front rims with holeshot tires, a set of rear holeshot tires(no rims), and foot pegs. http://s229.photobucket.com/albums/ee50/j2...ee%20parts%202/ The jugs, coolhead, and botttom end are sold. I'm open to offers on the roller. I have the complete harness for 75 shipped, 45 shipped for the stock airbox with a pd billet adapter, pd foam filter, and stock lid, and 40 shipped for the stock carbs with the tors remvoed.
  4. I need my flywheel lightened and my shift star modded. I know someone on here does it, Pm me and we'll set someting up. Thanks. I also need a +1 or +2 antivibe stem,
  5. It has denton d-arms that need upper heim/ball joints. It also has 2 keihin 34 pj carbs with k&n pod filters. Also, it's a 87/88 frame I believe because it has the 4x156 rear hub patttern which is why it has 10" rear beadlocks. Also, the previous owner said they were pep shocks, but he didn't really know much about the bike. I looked at it about a month ago when it was on craigslist. The po said the kid he got it from had it ported for mx. Good luck with the sale, the po had receipts for around a grand from replacing the harness/stator/cdi/coil.
  6. I actually looked at this banshee a month ago(found it on Craigslist) and the upper ball/heim joint is shot. They are denton d-arms. It has 34 or 35mm pjs on it and didn't have a gas line(owner couldn't understand why it wouldn't start). It's supposed to have pep shocks, not works but it was hard to tell due to the overall condition at the time. I know it had crazy compression and is supposed to have a wild port job. Good luck with the sale, the po had receipts for close to a grand for fixing/replacing the stator/coil/cdi/harness.
  7. The cylinders are at 66mm, I'd definitely be interested in the T 5's(do you have the silencers?). The bottom end is 250 shipped to the lower 48. As you can see in the pic, it's the cases, transmission, and crank. I'm keeping the clutch basket, flywheel, etc. for spares. I also have stock carbs with the tors removed for 40 shipped.
  8. I'll take 200 shipped for the jugs, piston kit(pistons, wrist pins with new bearings), and gasket set. Outlaw extreme had sand drags last year, they're in Malvern(about 10 minutes from massilon). I know some of the guys at ohiomafiariders.com run drags, they have a list of all the local tracks and trails on there. I do mostly trail riding, if you like hills check out Wellsville before they shut it all the way down. They had sand drags and mudpits there, I'm not sure if that'll be open this year.
  9. I have a 96 banshee roller for sale for 600, 0 hr top end(stock porting, new in box pistons, fresh bore), pro design coolhead with 19cc domes for 300 shipped or I'll sell just the coolhead with domes for 125, bottom end with mint cases(crank needs rebuilt) for 250 shipped, stock airbox with pd billet air filter adapter and pd foam filter for 60 shipped, and a nice set of fmf fattys with silencers for 150+shipping. I need a +2 antivibe stem, t-5, dmc, or cpi pipes, and a roundhousing swingarm(preferably +4 but will take longer or shorter) and would consider trading for any of the above. I'd prefer lcoal pickup, but can ship via fedex ground and will take postal money orders(no paypal account right now). Pm me if you're interested, I'll have photos of the roller tomorrow. I'm in Akron, OH and am willing to drive for the right deal. http://s229.photobucket.com/albums/ee50/j2...ee%20parts%202/
  10. Is the roll design stem +1 or +2 or is it stock heigth? Do you have any pics?
  11. Here's a link to some pics, I got the antivibe mount off of ebay for 79+shipping if I remember correctly from east coast atv off ebay, or you can get one from atv fourplay with the offset mount but they charge 149 or something crazy. http://s229.photobucket.com/albums/ee50/j28d/?action=edit It's in the album yfz stuff, photoshop has changed since the last time I used it so I'm not sure how to link the whole album. All my pics on there are public however so you should be able to see it. I can take paypal or a postal money order, or cash if you pick it up locally. If you wanted the fulll harness with cdi and key switch with key, radiatior with fan, spare flywheel, spare middle starter gear and cover, spare oem oil cooler with lines, and a factory Yamaha shop manual along with the TAG stem and houser flag I'd do everything for 230 shipped. Let me know and thanks.
  12. 140 shipped on the stem and flag. I have a full 04 Yfz harness with cdi, new black boxes, and good plugs off a running yfz, spare yfz flywheel, factory yamaha yfz manual, factory yfz radiator with fan, 06+ lsr yfz or raptor roundhousing carrier, and a few other misc. parts. I don't need anymore yfz parts, I parted it out and got a 98 Banshee. I need Bansheee parts-a antivibe stem, +2 a-arms, some toomey or dmc pipes with silencers(I have nice chrome fmf fattys with silencers to trade), and a trinity 2-1 35 or 38mm carb setup with airbox piece(I have twin kehin pwks to trade, not sure of size but they fit in the stock boots(intake and airbox) and may have had the springs cut since they have a lighter throttle pull than my 250r). Let me know if you have any banshee parts to trade, I'd also consider a +4-6 swingarm, or a full set of plastics(no white or red, can be race cut fronts).
  13. Do you know if this takes a banshee axle specific roundhousing carrier(I have a lsr 06+yfz roundhousing carrier) and would be interested if I could use that instead of buying a new one. Let me know and thanks. quote name='bry' date='Mar 19 2009, 11:40 PM' post='972019'] how bout 200 shipped ?? any bites??
  14. I have a like new +2 Tag Yfz or Raptor antivibe stem with a houser flag(2 rides on both) I'll trade for a +1 or +2 antivibe banshee stem. I'm keeping my antivibe clamps(had to buy special ones to mount the tether with my flexx bars) and you can keep your clamps, rubbers, bolts, etc. If you're interested, pm me or give me a call at 330-631-1921(I'm in Ohio). I also have a bunch of other yfz parts I can trade.
  15. Like the description says, I need a set of 10 in. rear beadlock rims. I have paypal waiting, my email is johnnygee40 at yahoo.com so send some pics and I can pay as soon as I see them. Thanks.
  16. I have a blue moose 2x chest protector(I'm 240, 6 ft. and it fits kinda loose). 40 shipped and it's yours.
  17. I have some peps with rezzies for 340 shipped. They're valved for +2 a-arms and a 200 lb mx a rider. Here's a link for a pic http://cgi.ebay.com/ebaymotors/Banshee-pep...1QQcmdZViewItem
  18. Hey, how much for the frame? Also, if the a-arms have ball joints, how much for those? Let me know and thanks.
×
×
  • Create New...