RIPPEN

I just have the stock swinger extended on mine. I want to eventually spend the bucks for a nice one but right now it works fine. There are several welders around here who do it for 150-200 but I have also seen a thread recently here on HQ where someone is doing the stockers any length for(I think) 275. Also gotta add for the brake line though . Otherwise the only bolt on ext. I have seen was a 4" for the Raptor RIPPEN

Fast87--- I would be tryin to hook up with that if I were you. I would avoid kissin her though RIPPEN

Couldn't say it better myself... Prayer sent RIPPEN

I wish I was the one getting to go out and test some of these guns and bombs... Be able to take all your agression out and get paid for it. RIPPEN

Cool--If my money allows for it I may have to get it done. Just didn't want to do it if what he said was true--Thanks RIPPEN

It was only like 192 for me That would suck to not notice that untill after you buy them... RIPPEN

I was planning on powder coating my bike untill I talked to a guy who said he powder coated his first frame off and hated it. He said any fuel or brake clean or anything he got on it dulled the finish and made it looked like shit. So after hearing this I decided to get some high temp engine paint(heard its more durrable than reg paint) and went to town. Looked great untill I got a little brake clean on it and the shit wiped off like nothin... Sucks I gotta take it all apart again but where do I go from here. Kinda short on cash but Iam curious if what this guy was tellin me about PC is true... Also those of you who have bought auto paint for this, how much does somethin like that cost??? Thanks RIPPEN

In the Clymer book they are calling it the knuckle arm & knuckle arm assembly(pg266)... But they are sayin 88 and on the allens conecting the two are spot welded and not to try and sperate them. But I don't see where it says anything about it being loose at all or if so to replace it.. RIPPEN

I don't think mine is quite that much... Can just feel a little movement. So Iam wondering if its ok to run??? RIPPEN

Iam finaly going back together with the front end. Today I noticed a little bit of play where the steering arm conects to the spindals. The two allen held bolts are tached so I know you cant tighten them but Iam afraid maybe the threads are pullin out??? Both sides have a little play, but the left is a little more noticeable. Is this a common problem or what can be done to fix it if anything??? Thanks RIPPEN

Thats so funny and TRUE Brooke RIPPEN

Iam just needing to know where I can find a knob for the rear shock. Chain broke mine last summer. There isn't a whole lot of ATV junkyards or places to get used parts around here. Thanks RIPPEN

Nice lookin ride! Not a huge Ford guy but I can respect ANYTHING with turbos RIPPEN

I agree with you in every point... RIPPEN

I just checked out that new Camaro last night... Not impressed at all. It didn't mind it to bad other than the front end, what were they thinkin??? RIPPEN

Thats Great Sure that will be a big hit RIPPEN

Sucks man... Hope everything goes well and be sure to let us know how your doing post op... RIPPEN

You get it opened up yet??? Let us know what you find.. RIPPEN

Thanks for the link, Ill have to check that out. Sand vids are deffinatly more of what Iam interested in. RIPPEN

Welcome!!! Most everything you would ever need to know about your bike can be found here . Lots of other good stuff too RIPPEN

To bad your bike isn't built by trinity... You could at least pull a 35 tooth in front and a 70 or so in the rear... RIPPEN

I have seen huevos 7--it had some cool stuff on it like the Philly drags and some pretty crazy jumps(would have liked more sand and Banshees though). I have seen Glamis Gone Wild which was pretty cool other than it seemed to have more girls than bikes. Don't get me wrong I love seeing the women but if I was really after that I would invest in Girls Gone Wild or somethin. The only other vid I have seen so far is quicksand 3 and I liked it more than the other two. Had some shit on it that really rips and those shots of Robbie Gordon in his truck was awsome. Just curious as to what vids are your favorite??? RIPPEN

I have always just pulled the hose off ... RIPPEN

Sounds like the exact same thing that happend to a buddy of mine When we pulled his apart we found a piston that was trashed.... Like fast87 said check the obvious simple things first then I would go for the head and jugs. RIPPEN