RIPPEN

I think its funny how he isn't listening to any advice Just keeps on his merry way--LOL I think if he gets it to work he better invest in some good leathers and a bad ass crash helmet... RIPPEN

I agree with you and Loco .... RIPPEN

I saw a cool chart on here somewhere recently where you typed in your info and it tells you the speed in each gear... But just curious, whats the point of runnin 18t sprocket??? RIPPEN

Thats the same plug I run for that exact reason. Pay a few more bucks but they seem to last quite a bit longer RIPPEN

I had a local bike shop send it out and get it done... PM if your interested and Ill shoot you the #. I think it cost like 60-65 bucks. About 15 dollars more than the material when I priced it. It turned out real nice and no more slip in slide RIPPEN

Kinda what I was thinkin--I had the two in one setup and it really sucked the gas... But doesn't everything when you have it pinned all day RIPPEN

All I did was just scuff it all up good and used brake clean (to get any oil or anything off) . Probably not the best prep job but the paint I used was wrinkle paint and it usually seems to hold up ok... Somethin a little different. RIPPEN

My two rings look like they have torn apart... Sounds like I need new ones.. RIPPEN

I would have to say that sums it up the best... RIPPEN

You took the words right outta my mouth Congrats on the new bike... Doesn't matter what it is, gettin a new bike is a great feeling. Its just a bit better with a Banshee RIPPEN

Imagine how fast it would go through a leg... RIPPEN

Yeah cuz bikes are untouchable I have a buddy that built his car for more or less to kill croch rockets... Does a pretty good job at it to... RIPPEN

To be honest it pissed me off and I quit messin with it but Ill have to do like you sayid and just soak it real good.. Did you have problems gettin you upper and lower ball joints pounded loose?? RIPPEN

Mines there too... No kitty for me yet RIPPEN

Just when I was moving it around and dicken with it. The rubber looks good, just a bit came out around the bolt.... RIPPEN

Hey--that was my exact same scenario but I just posted it in suspension... Still havn't got mine though RIPPEN

I got two questions--First, today I took off one hub without any problem. Took the nut off and it pulled off fine. Went to take the otherside off and its stuck and Iam not sure what the best way is to get it pulled off. Kind of afraid to pry or tap on anything to hard so I was hopeing someone may have a trick. Second question, I pulled the a-arms off and noticed where the ball joints are it was oozing some grease since I was messing with it... Is this ok, normal, not normal, what do i need to do to fix it or check it out??? Thanks for any info RIPPEN

Same here, all you need is a flat head sd and when you pull the hose loose you can point it straight into the bucket RIPPEN

What are you doing posting this on here if you were not expecting/some or quite a bit of negative feed back??? When I first read your topic title it kinda automaticly put me on a defensive side cuz I personaly think the Banshee is a awsome looking bike. It stands out from other quads(yfz,raptor looks to much alike) and its a well know and respected look. I think its cool your going out and doing something different, I can respect that. However Iam not one thats into what I call "cross breading" . You must be really tallented in fabing but I just personaly think you can make a banshee different or "less ugly" many other ways than puting a entirly different set of plastics on. I mean what made you choose YFZ plastics over say... 400ex plastics??? RIPPEN

Sorry meat... We were not trying to lure you outta the closet... RIPPEN

Tomarrow Iam planning on painting my frame. Iam wanting to paint it black but not sure what to do about the A-arms and swing arm. I was thinking of painting them silver so there is some contrast. A few buddies say silver, a few say black. Wander what some of you think??? Below is what it looks like now other than I will have CPI inframes, silver hubs and the jugs are no longer yellow. Thanks RIPPEN

That looks like a blast ... Where do I sign up ??? RIPPEN

Cool!!! Thanks for the info---I may have to get that kit. RIPPEN

So keep it RIPPEN

Jeff had the CPI inframes in stock and for a few bucks cheaper than anywhere else. A pleasure to deal with and great customer service as usual!!! Cant wait to get the bike done so I can put them on Thanks Jeff! RIPPEN