Capone

On my last shee, i fcked the topend 3-4 times in a matter of a month, if I would have just taken the month I used to rebuild those 3-4 times, and bought a cub stroker setup, it wouldn't of ever happened again... might wanna think about how much you're going to put into it, or what its worth.

Seems alot of you posters are from IL, is Charlie from IL? Where did you guys send the money to?

Get ya a noss machine head, or and aftermarket head (if you don't have one already) and run Engine Ice. I had a bad overheating problem, put these on, never had it again. Well worth it in my opinion. if you wanna go farther than that I would get the billet impeller, and maybe a inline cooler(dunno if these work but it can't hurt)

Look @ your elevation for where you'll be riding most the time, you may be able to cut more off without any problems to get a little extra power.

no offense to the 600, its a powerful bike, but you may want to go with something a little more powerful to make it worth it...

Word, I'm out here in Riverton, wish you guys were around when I had my last shee...lol. Well I'm starting over, hope to ride w/ ya soon guys. WNARACE you should stick Sringfield , IL in your profile... maybe find some more ppl to ride with... and REP%.. =)

lol, thanks for the tips guys, rocketboy, the point was to stay away from cheetahs. That way when I goto the drags, no one will ever know. =), only reason I said trinity is because they had a nice kit for around 550$ that came with cable, manifold, and carbs, I personally dislike trinity, but if someone else can match that deal... I'll pick it up.

I'm looking into building a nice drag setup on a newer banshee. The locals around here, picked up a bunch of 450's, theres about 9 of em around here now... no shee's. I sold my last shee, of course, before they had theirs so now its back to the drawing board... Im going to pickup a shee for around 1500$... running... I'm thinking about sticking with the stock jugs, to keep the sleeper look for runs @ the badlands and such. What would you guys suggest as the best setup with the stock jugs? I'm looking @ the Passion 12 port stroker kit..full drag port... with maybe a 18 or 17cc dome setup?(1k ft elevation). What would you suggest to come with this carb wise? (Looking at the Trinity Racing 35mm Dual Carb kit)? I'm sure this will put me in the 70-80 hp range on race fuel? Please correct me if I'm wrong. Maybe PassionRE could clear up the following question: When ordering the Passion 12Port kit, do I send my jugs in, or do you supply? Also, in the Passion 12Port Stroker kit, what is the stroke, +4? I'm not another 15 year old making a wish list, I've been on these forums for quite awhile now, and know you guys can steer me in the direction I need to go, thanks for the replies.

Not to hijack this kid stolen thread but... Anyone that can point me in the direction of purchasing a H&K Mp5 I willl <3 forever, thx =) Pm me.

Yea, I was gonna snap some today, but I can't find my cam's memory card...lol. I'll have some asap.

I got a 98 CBR 600, roughly 9k miles on it, its painted burnt orange with alot of custom airbrushing, needs nothing except maybe a new back tire. Has a D&D exhaust, jetted, sounds very nice, pics upon request. Bike runs perfect. Asking $3k, negotiable.

i'll pm you

05 all black Honda 600RR - Mods include: FMF Undertail pipe. red & black tank pad, red rim stripes, undertail eliminator kit. Bike is very fast & clean, must go before next payment. I'm going to give it 10 days on here then it goes to ebay. I'm starting the price @ $7,500 Iit was bought brand new 2 months ago for $8,700, so I'm not willing to go much lower. Bike is perfect condition. Email: [email protected] aim: switch aim. thanks.

I have my new polishing equipment and will be taking orders. Anything you need polished, please feel free to let me know. I will have the website up soon but until then you can email me @ [email protected](use the subject "Polishing Request". I'm also available almost 24/7 on AOL Instant Messenger "Pone Polishing". I've been local for awhile now, I relized the demand and obsurd prices of the other guys. I provide a smooth mirror like finish on all my products, for a fraction of the price. Please instant message or email me, thanks! -JD 'Pone Polishing.

Hey guys, just wanted to drop in to let you know I have my new polishing equipment and will be taking orders. Jugs, Heads, Clutch Covers, Brake Calipers, anything you need polished, please feel free to contact me! I will have the website up soon but until then you can email me @ [email protected](use the subject "Polishing Request"). I'm also available almost 24/7 on AOL Instant Messenger "Pone Polishing". I've been local for awhile now, I realized the demand and absurd prices of the other guys. I provide a smooth mirror like finish on all my products, for a fraction of the price. Please instant message or email me, thanks! -JD 'Pone Polishing.

Hey guys, just wanted to drop in to let you know I have my new polishing equipment and will be taking orders. Anything you need polished, please feel free to let me know. I will have the website up soon but until then you can email me @ [email protected](use the subject "Polishing Request". I'm also available almost 24/7 on AOL Instant Messenger "Pone Polishing". I've been local for awhile now, I relized the demand and obsurd prices of the other guys. I provide a smooth mirror like finish on all my products, for a fraction of the price. Please instant message or email me, thanks! -JD 'Pone Polishing.

Paying top dollar for undamaged cyls, heads, clutch covers also polishing these for very cheap. Pics will come soon. P.s. You can also reach me on my aim @ "Switch aim" thanks.

Pay top dollar for them, also polishing for very cheap, cyls, heads, clutch covers, anything alum! PM me with any questions. P.s. You can also reach me on my aim @ "Pone Polishing" thanks.

Please remove, item has been sold - $2,750

ok, back to the 929, wanna get rid of it for an 01 f4i and a 03 shee?

What year busa? Where ya at? I might be interested =)

If you guys are looking for something not quiet expensive, and local, I'm in central il. Listing: http://cgi.ebay.com/ebaymotors/ws/eBayISAP...3ATB16%3AUS%3A4 P.M. me if interested. Thx for the thread space.

how about a 2001 f4i + a 2003 banshee? where you located?

ok, its back on ebay, and I got a guy comming from detroit to look in two days, if that doesn't work out, I will be letting it go even cheaper.

$2800 - Anyone?