Capone

wow, <3

I just realized, I also need a size of the drill bit, and the # of the tap, if anyone can get this... I'd appreciate, or if you have both, and don't need anymore please send.. I bought a twist throttle of ebay, comes with carb caps, but no screws, drill or tap. so I bought screws for 10$ they want 35$ for the kit with a drill bit & tap. I have a full tap set, and I figured I could save the $25 for a drill bit.

Anyone got pics of where the idle screw goes? I just want to make sure, this kit is used and doesn't come with directions . Any helpful tips would be appreciated...

Mods: '03 Shee 370cc K&N Pods Boyseen PowerReeds CoolHead - 18cc (110 octane) RickyStator Adj. Timing Plate (+5) Polished Clutch Cover (could used repolished) Polished Jugs(need finished, almost done though) Stock Carbs, w/ TORS elim. - Twist throttle. 19x11x10 Holeshots w/ ITP rears - Front has Razrs Wiseco ProLites FMF Fatty - PowerCore's (polished) Fresh topend, about 15 hours on it. Blue Meier plastic, all receipts, extremely nice! Springfield, IL. First $3800 takes it. I'm looking to buy a bike. Need to get out from under 'shee loan first. Only thing this bike could use(doesn't need the stock ones are fine, but it would look really nice w/ aftermarket swinger & a-arms) and maybe a graphic kit if your into that. Thanks for looking, I'll post pictures tomorrow.

I've seen ppl hyping G3's all over ebay, message boards, fake websites... its really pathedic. I don't think they're real users, I think they're trying to sell it if you know what im sayin.

Stock carbs/twist throttle/tors elim. Make offers. PM me.

Would top end porting help out for the loss by a single carb?

I found a guy around here that has: "2 into 1 carb kit, 38mm air striker carb, k&n filter, twist throttle, fmf reeds, 3/4" reed spacers, all bolts, orings included. no problems, everything works great!!! " Current mods: '03 Shee 370cc K&N Pods Boyseen PowerReeds CoolHead - 18cc (110 octane) RickyStator Adj. Timing Plate (+5) Wiseco ProLites FMF Fatty - PowerCore's I don't got any porting yet, that I've done anyway, so I know the 38's will be big, but I plan on porting in the near future. I ride alot of roads(top end) will the 38mm make up for it? or should I just sell it? and will the manifold be too big for the 35mm? Thanks for the fast replies!

He's right below you in Pekin. I think the 38mm might be too much for me. I wanna be able to run with mod'd 450's, 38mm will prolly just bog me more...?

Current mods: '03 Shee 370cc K&N Pods Boyseen PowerReeds CoolHead - 18cc (110 octane) RickyStator Adj. Timing Plate (+5) Wiseco ProLites FMF Fatty - PowerCore's I don't got any porting yet, that I've done anyway, so I know the 38's will be big, but I plan on porting in the near future. I ride alot of roads(top end) will the 38mm make up for it? or should I just sell it? and will the manifold be too big for the 35mm? Thanks for the fast replies!

I found a guy around here that has: 2 into 1 carb kit, 38mm air striker carb, k&n filter, twist throttle, fmf reeds, 3/4" reed spacers, all bolts, orings included. no problems, everything works great!!! For sale. He wants 285$ for it. Too much? Should I jump on it? Quick responses appreciated!

Im thinking a light blue also, might go ok with dark blue.

But see, blue & orange are the school colors around here...lol. I hate this school so I'd rather not do that.. yellow... I guess thats not so bad..

I got meier blue plastic, my frame needs repainted, what color? I got some bright bright neon green paint, but I dunno if I want to go that extreme. If I can't figure anything else out, thats what it will be.

Do the toomey stingers fit the FMF fatty pipes and vise versa? The FMF silencers are hiddious, but I like toomey's silencers, just wondering if they would work together

toomey silencers fit on fatties? Anyone got some silencers for sale? any idea what it sounds like? I like the look of the toomeys and the look/performance of the fatties... it would be perfect.

I pay 7.50 a gallon,Klotz race fuel... try that. 41.00$ for 5 gallons w/ tax 190psi compression, the shee diesels on anything less.

I'll give ya 15$ shipped for the flywheel.

I'm interested in the carb setup, any pictures? I can have them picked up, thanks. please pm me.

End of April is Badlands trip for me and my friends, you guys are more then welcome to join! I've never been to bandlands, its always been flat river for me. Last year flat river sucked, and I've heard good things about badlands, so we'll see.

To where?

AIM: SWITCHAIM EMAIL: [email protected]

Air filter, Pipes, Timing advance. Hell of a difference from a stock Shee. Then when that gets old, which it will, goto the head/porting/tires/dress up. A modding a shee is like a drug, it'll never be enough.

For sale, tires have about 1/4 tread left. Rims are nice and polished & taken care of, I'll post pics in a bit. I'm thinking maybe 90$? After polished for about an hour, the tread is only 1/4. Rims are in perfect shape, pictures are available here: http://blueshee03.tripod.com/Wheels/wheels.html I just put some nice elbow grease & some Mother polish onto them, and they're ready to go! PM Me if interested.

If you don't got em, where can I get em?