NugShee

In no way do I suport the practice of theft or anything of that nature, or uh wait a minute, did you say $3,000? do you take cash? hehehehe

its very possible that you may have noticed a diference. Higher octane fuel will help your shee run cooler. when a motor gets hot it is less efficient and looses power. So what you probably noticed is the little extra boost you got from the motor staying cool. Just what I discovered back when my motor was stock.

are the two ignition coils you have for a warrior?

I bought a new 4runner and had it shipped from Florida to Oregon for $950 in a enclosed trailer. I also shipped a motorhome from oregon to wyoming for about the same amount. Does that help any? hehehehe

make sure you torque everything to spec. there are some nuts on there that cant be tightenned to tight or they will pull the studs right out of the case when the motor gets warm. the head bolts are one of them, they only need 20flbs of torque. also if they arent all tightenned the same amount then you are just asking for trouble. The head will worp and you will have coolent leaking into the piston and out the exhaust. so do it right the first time and there shouldnt be any problems. Good luck.

will the universal puller work? the one with the 3 arms that wrap around the flywheel and then you screw in the middle bolt. the middle bolt pushes in the center shaft while the 3 arms pull on the outside of the flywheel. You can find those pullers all over but im not sure if they will work or cause damage to the flywheel. maybe someone who has used one can let us know if they work.

I dont have one since you cant improve perfection!!!!

cats are just big rodents with furr. I dont hurt them but still dont likes em

Nice find dude. Its fine that its not a Banshee. I wont say anything bad about a quad as long as your having fun with it. I wished I could find a deal like that around here since I only have 3 quads and could use another for a friend if I decide to bring someone along. Good Luck getting it going. Doing a full rebuild and fixing her up is almost as fun as riding.

Have them anodized.

in advanced search there is a box right under the keyword that is for searching completed listing only. check that box

I voted but have to be honest, I have never had neither of these tires since I only ride sand. One thing that I thought of though since you do so much freestyling is the weight of the tires. Shouldnt you be going for the lightest tire and wheel combo for freestyling? I would go with whatever is light and looks good.

I work in a sawmill and do several jobs in the mill. One of my jobs that i have to do is I have to throw away any of the garbage wood that passes by me on the chain. The day after we got the slap in the face or should I say bonus I threw away more wood then ever. Lets see at $75 a board for a clear faced 10ft 8/4 maple I must have thrown away 150 of them that day (on purpose) that would meen I just cost the company $11,250. those fuckers should have given me a bonus. I could get into details of what I do but nobody would understand so Ill just say a saw mill in general.

I would rather get nothing. It IS a slap in the face if you ask me. They make billions and give me $50. And to add to that I have spent enough time there working this year and didnt write my time down that They probably owe it to me. I guess the part that really really pisses me off is that all the supervisers and upper management got fat bonuses, for what? sitting on their lazy asses. Oh thought I should share what I got for christmas from all my relatives. All together I got $30 and a pic of my niece. Doesnt matter I spent $500 or more this year on everyone. Including a cannon digital camera for my sister. Anyway, its christmas night and it will all be over in the morning. Well I guess thats all I have to say about that!

sorry, I cant help you out with the dyno sheets but yes you can build a banshee to beat the quadzilla. I dont think that a stock but piped banshee will beat the quadzilla but who knows. pretty much if you build it it will beat it. Good luck with the dyno sheets though.

They might work fine for placing them under the seat. My guess is that they will be close enough to your ears that you might even be able to hear them. Get yourself a good sturdy shoe box to mount them in, Nike makes a good box with an attached box lid. Just cut a circle in the top and tape them in there. Post pictures of all this when you get it done. No need for sound files!!!

Kinda off the subject but along the same lines of what we are talking about here. Why does a part like the pipe hangers cost so much. I mean a lot of those parts can be made at home by using a scrap piece of aluminum. I dont understand who sets the prices for some things but $1200 for a set of shocks? WTF, I mean I can put new shocks on my pickup for a fraction of that. Also $300 for a stator cover. If I were to chrome everything and upgrade everything to aftermarket I could be in the hole $25K. Theres not a Banshee in the world that I would spend that kind of money on. Shit you can get a damn nice ride for $25. So what have you all done to add some bling to your bike but avoid spending so much money on all the parts?

More importantly, why are you considering blaupunkt? I mean, whats the reason behind you stooping so low? If you get a set I recommend you powering them with a casio amp and a stock datsun head unit. The removable speakers on your home bookshelf unit should work sufficient. Just ziptie them to the headrest and tape the wires across the headboard and down the center of the windshield. There, that should work for ya!

Man, sounds like some of you get as much of the shaft as I get. Sorry to hear about those of you that lost your jobs this time of year. Its a possibility that it may work out for the better though. Im mostly bitching cause of the mass money that my company makes. Maybe, I shouldnt say anything since we do get paid pretty well and we have full benifits with a company matched 401K. But the point is that They make more money in one day then Ill see in a lifetime (literally) and they couldnt even kick down some cash to those of us that make it happen on a daily basis. We work on average 55hours a week. but hey, I still have a job I guess. All I have to say is WEYERHAEUSER can lick my balls!

Did any of you get a Christmas Bonus this year? I work for a multi billion dollar company (Weyerhaeuser) and they gave us a $50 gift certificate to the local mall and a carhartt jacket. This was not a Xmas bonus but was a reward for passing 1 million man hours with no lost time accidents. Am I wrong for being so pissed that they are so cheap. I know that our mill manager gets $120K a year plus a $70K bonus. We dont get shit. I wanted to mail they're gifts back to them since I felt it was a slap in the face. What did you all get from work for a bonus or gift?

one side has a slot where it slides out the other side does not. Once you get one side pulled out you can move the tailgate a few inches to the other direction then the other side will come off. Dont know if that makes any since to you but good luck

I dont know about the vanilla part but it definantly is pinnaple

Anyone?

Are the pegs stock or aftermarket? If stock, have they been chromed? Please PM me if you have any polished or chrome parts and prices for them. Thanks again

What you have will work just fine and wont give you any problems. If at all possible use 2 gal. Race fuel (110 octane) and 3 gal. premium fuel in it. With 20cc domes you can still run pump gas but I wouldnt recommend it unless you dont have a choice. I have 19cc domes in mine and mix my gas the same as above. Once you get it all together do a plug test and make sure your jetting is dialed in. If you dont know how just ask us. Also, yes you can still advance the timing you just have to make sure to use the gas mixture I said to use and everthing will be as dependable as stock. Give er hell!