sheefreak

That's pretty good Kiltman!

I'm not sure on the vouchers. I am going to be there Friday night at the voucher center just in case. If anyone else knows for sure, please chime in.

Sounds like time for a top end, may get away w/just a hone and rings. Does it start hard?

I usually always stay till about three o'clock on sunday. So I'll prolly see all you Sunday drivers too.

About the waiting in line deal, Just get there Friday night and the voucher center is open from 9-10 p.m. for vouchers the following day, same thing saturday night for Sunday. If you only have a truck hauling your quad(no trailor) you can usually drive right on since they started the voucher system. Even if you do have a trailor and there is a big line, you can tow two quads at a time from your campsite at a time w/ a truck that is dune ready. Always a way to get around the line.

You'd be the shiz'nizzle. Let us know how that goes.

Just might be there. Am going on the 15th, try to get there about every two weeks. I have a nice free place to stay.

Cool, hope to run into ya. My banshee is a black and red 99 like the one in the header.

I am from the Battle Creek area and I have to travel to the Badlands, or Silver Lake for anything worth a darn. Nothing real close though. I think there is an indoor mx track over in your area somewhere though, maybe someone can chime in and give you some details.

Anyone?

When you pull the choke, it richens up your ckt, good indication of an airleak if the ckoke fixes the problem. If both sides did it I would just say you are lean, but this isn't the case. May want to do a leakdown test.

I could use some help on the suspension, please do!

Going to be there w/ my banshee, a warrior, cr250 , and a blaster. Also does anyone fly anything on their flag for HQ id?

It would make sense that your pilot is clogged, but if you cleaned it

Well done!

Works everytime, just tough when it comes time to torque it back down, might want to go w/fixit's idea for this reason.

I've been so wasted before, I don't remember some of the night, but I still acted like me and did the things I would normally do, just a little more extreme(so I'm told). Sorry to say it bro, but even if she was smashed beyond belief, she wanted to dl it anyway.

It's being released Tuesday, and I just missed them in Detroit for girls b-day party

I haven't been on here for a few days, but welcome back Led.

Need to look at the slides as you push on the throttle, they need to both raise up at exactly the same time. If one starts to raise before the other, then you need to adjust the screw on the opposite carb to raise at the same exact time. Then from there, you need to turn the screws the exact same amount of turns until you find the desired idle speed.

Well, I can't say I have any of them, but when I worked in the tool department at Sears(5 yrs), Milwakee was always the most purchased brand by contractors and people who abuse their shit.

I run the klotz supertechniplate also at 32:1, been thinking about 40:1. Smells great too. Ran it in the leaf blower the other day and neighbor guessed exactly what it was, got a laugh out of that.

Dewalt is a good brand, but uses plastic gears on their drills, not sure about grinders. You can never go wrong w/Milwakee, but you are gonna pay!

I think it's a better idea than anyone else has come up with.